Designed for use on 1000BASE-T networks, the 802.3ab compliant Gigabit RJ-45 Copper SFP Transceiver Module from StarTech is capable of transmitting data up to 328 ft (100 m) at speeds of up to 1000 Mbps. Installation is simple, as this transceiver module comes hot-pluggable, allowing it to be installed without shutting down the network and without any network disruption.

802.3ab Standard    328 ft / 100 m Max Transfer Distance    1000 Mbps Max Data Transfer Rate    1 x RJ-45 Female Connector    Aluminum Enclosure

This Gigabit RJ45 SFP is manufactured to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards.

This Gigabit Copper SFP is engineered to high standards and is 100% Cisco compatible, equivalent to the Cisco GLC-T SFP transceiver. The StarTech.com transceiver is configured and fully tested to ensure it works with Cisco or other major brands of networking equipment.

Delivering both convenience and scalability, this SFP is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and convenient solution that's compatible with a multitude of multi and single-port Gigabit Ethernet networking devices.

Ideal for use in switches, routers and other networking equipment, the SFP provides reliable performance, enabling you to expand your network to remote segments cost-effectively. The SFP supports auto-negotiation, maximum distance of up to 328 ft / 100 m, and maximum data rates of up to 1000 Mbps.

Related Questions and Answers

Q: 1. Can this hold a wireless transmitter?

A: The Impact Air-Cushioned Light Stand (Black, 8') has a 1/4"-20 male thread on the top of the light stand. If your wireless transmitter has a female 1/4"-20 threaded socket, then you may screw the wireless transmitter directly onto the male 1/4"-20 thread on the top of the light stand. If your transmitter does not have a female 1/4"-20 threaded socket, but it does have a hot shoe/cold shoe, you may purchase an adapter such as the Vello Cold Shoe Mount with 1/4" Thread, B&H # VECS20, for your usage needs. Finally, if your transmitter includes a lanyard, you may hang the transmitter from one of the locking knobs on the light stand riser.

Q: 2. Which of Manfrotto's many Quick Release systems does this support? RC2, RC4 etc. I want something that will allow me to use my Arca Swiss-style camera and lens plates with a Manfrotto pan & tilt, or gear heads. Is this it?

A: No, Manfrotto doesn't have arca swiss-style quick release plates. You will have to buy an adapter

Q: 3. would this work with new Sony 70-200 Macro zoom?

A: Yes, the 3-legged Thing BASE70 Arca-Swiss Compatible 70mm Wide Quick Release Plate (Copper/Orange) would work on the Sony 70-200mm Macro zoom. However, the plate might be a bit too big.

Q: 4. What is the size of the smallest footprint of this stand? I am looking for a light stand where I can sometimes move to a tighter area and want the flexibility of making the footprint smaller.

A: At the minimum spread (when the center post just touches the ground), the foot to foot distance is 19 inches, and the stand will fit within a circle 22 inches in diameter.

Q: 5. Will this mount to a Sachtler Sideload Plate S/Ace Tripod QR Plate (BH #SAWPDV1)? If so, does the retaining pin engage underneath the Sunwayfoto MAC-14 to prevent rotation?

A: Yes. This can be attached to that plate. It has a 3/8"-16 threaded hole with a 1/4"-20 bushing adapter to thread onto the plate. The Register Pin on the Sachtler would reduce rotation.

Q: 6. 1. What is the length of the M6 screw please? 2. Is it a compatible fit with the RRS L brackets?

A: I can answer part of your question -- about RRS plates. I have RRS, Induro, Kirk, Desmond and a couple of other brand plates, and this clamp works with all of them. The Sunway Photo website calls this RRS Compatible. It also works with Manfrotto 200PL plates.

Q: 7. Will this plate work with the Canon EOS R100?

A: Yes, the 3 Legged Thing BASE70 Arca-Swiss Compatible 70mm Wide Quick Release Plate (Metallic Slate/Gray) will work with the Canon EOS R100 Mirrorless Camera.

Q: 8. Will this work for a Magnus VT3000 plate?

A: Yes, you can mount this to the VT3000 quick release plate's 3/8-16th screw.

Q: 9. Will this plate work with Canon EOS 1V 35mm film camera?

A: Yes. As the 3 Legged Thing BASE70 Arca-Swiss Compatible 70mm Wide Quick Release Plate (Copper/Orange) is a universal quick release plate with a standard 1/4"-20 male thread on the top of the plate, it would be compatible for use with the standard 1/4"-20 female-threaded socket on the base of the Canon EOS 1V 35mm Film SLR Camera.

Q: 10. Does this fit on manfrotto MTPIXI-RD?

A: yes, it will attach to the MTPIXI-RD.