4 Channel Guitar Amplifier

Ashly Nxp75 1u 2-channel Multi-mode Network Power Amplifier With Protea Dsp Software Suite

Product Code: ga182085
Availability: In Stock

$5,187.00 $7,261.80

Qty

0 reviews Write a review

Description
Reviews (0)

The NXP75 2-Channel Multi-Mode Network Power Amplifier from Ashly is capable of driving 2, 4, and 8 Ohms loads at full power and offers a maximum rated output power of 75W per channel at 25V, 70V, and 100V modes. This amplifier features a lightweight 1U design with universal AC input SMPS for improved energy efficiency. It comes with additional energy saving features such as Real-Time Clock (RTC), Event Scheduler, and GPIO control.

The multi-mode output capability allows each individual amplifier output channel to be set for Low-Impedance, or Constant Voltage operation using DIP switches. The Protea DSP (Digital Signal Processing) software is included with this unit for dynamics, gain, equalization, matrix mixer, crossover, delay, and metering. With the Euroblock, and IEC connectivity, this power amplifier safely fulfills the requirements for installed sound applications.

Amplifier
Number of Channels	2
Output Power	75 W @ 2, 4, and 8 Ohms
Dimensions	19 x 1.75 x 14.54" (48.3 x 44.5 x 36.9 cm)
Weight	12 lb (5.4 kg)
Protea DSP
Input Source	Protea DSP Options: Analog, auto (net, AES3, analog)
Limiter	Brick Wall Limiter Threshold: -20 to 20 dBu Ratio: Infinite Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB
Compressor	Threshold: -20 to +20 dBu Ratio: 1.2:1 to infinite Attack: 0.2 to 50 ms Release 5 to 1000 ms/dB Detector: Peak/Average Attenuation Bus: 2 available Metering: In, Out, Attenuation, Graphical
Controls	Autoleveler Controls Target Level: -40 to +20 dBu Action: Gentle, Normal, Aggressive, User-Defined Maximum Gain: 0 to +22 dB Metering: Input, Gain, Attenuation Ratio: 1.2:1 to 10:1 Threshold Below Target: -30 to 0 dB Gain Increase/Decrease Rate: 5 to 1000 ms/dB Hold Time: 0 to 6 sec
Ambient Noise Compensation	Output only Max Gain: -20 to +20 dB Min/Base Gain: -40 to +20 dB Gain Change Rate: 0.2 to 20 s/dB Link Group: 16 available ANC Input Channel: 1 to 2 or 1 to 4 Noise Threshold -40 to +20 dBu Program/Ambient Gain Ratio; 0.3:1 to 3:1 Metering: Input level, Attenuation, Average noise
Ducking	High/Low Priority, Trigger, Filibuster, Ducked Program Trigger Threshold: -80 to +20 dBu Ducking Release: 5 to 1000 ms/dB Ducking Depth: 0 to -30 dB, -∞ Enable ducking at matrix mixer Metering input
Gate	Threshold: -80 to +20 dBu Range: Off, 100 to 0 dB Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB Metering: Key signal, gate LED, graphical Advanced Gate Controls Key engage enable Key Frequency: 20 Hz to 20 kHz Key Bandwidth: 0.016 to 3.995 octave
Gain	Gain (with / without VCA): -50 to 12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to -∞ WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
EQ Type	For FIR Filter Output only, 48 kHz only, 2-384 taps File Type: .csv, .fir For 31-Band Filter Type: Constant Q or proportional Bandwidth: 0.499 octave to 0.25 octave For Parametric 2,4,6, or 10 Band Frequency: 20 to 20 kHz Level: -30 to 15 dB Q Value: 92.436 to 0.267 For Hi / Low Shelf 6 / 12 dB / octave Frequency: 20 Hz to 20 kHz Level: -15 to 15 dB For All Pass Frequency: 20 Hz to 20 kHz For Variable Q HP / LP Frequency: 20 Hz to 20 kHz Q Value: 3.047 to 0.267 For Notch / Bandpass Frequency: 20 Hz to 20 kHz Q Value: 92.436 to 0.267
Feedback	48 kHz Sampling Rate 12 x filters In/Out per filter Lock (per filter) and global lock Filter Modes: Float, restricted, manual Filter Type: Notch, parametric Filter Frequency Range: 20 Hz to 20 kHz Notch Filter: -∞ Parametric Filter: 15 to -30 dB Filter Bandwidth 0.016 to 3.995 Octave Detector Sensitivity: 5 levels Float Time 5 minutes to 24 hours
Crossover	2 Way, 3 Way, 4 Way Crossover & High Pass / Low Pass Filters Bessel & Butterworth Filters: 12 / 18 / 24 / 48 dB / octave Linkwitz-Riley Filter: 12 / 24 / 48 dB / octave Frequency: Off, 20 Hz to 20 kHz
Delay	At 48 kHz Sampling Rate (Input Time, Distance & Temperature): Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms At 96 kHz Sampling Rate (Input Time, Distance & Temperature): Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms
Audio Metering	Range: -60 to 20 dBu Increments: 1 dB Peak Hold Indicator
Signal Generator	Pink Noise, White Noise, Sine Wave Signal Level: Off, -50 to 20 dBu Sine Wave Frequency: 20 Hz to 12 kHz
Mixer	Matrix Mixer: Gain (0.5 dB Increments): Off, -50 to 12 dB Mute: Per channel Auto-Mixer Enabled: Per channel Global Auto-mixer Response: 0.01 to 2 sec Enable Ducking at Mixer Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Processor	Input A/D, Output D/A: 24 bit DSP Processors: 32-bit floating point Sample Rates: 48 kHz, 96 kHz Propagation Delay @ 48 kHz: 1.42 ms Propagation Delay @ 96 kHz: 0.71 ms

Energy Star compliant

Consumes less than 1W in the automatic sleep mode

DC-voltage level control

Network, Serial, and Logic control via Ashly Network remotes (available separately)

Related Questions and Answers

Q: 1. Will the speaker connection accept banana plugs? What size? Thanks.

A: Yes it will accept banana plugs. The size is 4mm.

Q: 2. Can this system connect to wireless speakers for surround sound? Such as the MusicCast 20 W-021 Speakers?

A: Yes this is compatible with any Yamaha MusicCast series speakers.

Q: 3. Is there a connection for my rooftop FM antenna?

A: Yes this model has a 75 ohm antenna port on the back.

Q: 4. can this receiver power 8ohm speakers without issues?

A: Yes, this receiver is made to be used with 6 or 8 ohm speakers. There is a menu setting for the unit’s speaker impedance to be set to the impedance of the speakers connected.

Q: 5. Are presets lost after a power failure and need to be reprogrammed?

A: This Pioneer Elite VSX-LX505 9.2-Channel Network A/V Receiver will retain presets and settings after a power outage or power failure.

Q: 6. I need to be able to see the passwords I enter. How can I turn off hiding the password?

A: We are unable to provide an answer based on the information provided. For further assistance please contact us at sales@bhphoto.com or call us at 1-800-606-6969.

Q: 7. Can this AVR be added to Google Home Speaker Groups?

A: Not natively, it would require a Google home device connected to it.

Q: 8. Will it work with 220V/50Hz?

A: The Pioneer Elite VSX-LX305 will work in 120 VAC, 60 Hz only.

Q: 9. Does this receiver have 120 hertz video pass through ?

A: Yes the Yamaha RX-V6A supports HDMI 2.1

Q: 10. Will this unit accept RF commands from Direct TV remote??

A: Yes you would be able to set up the Yamaha RX-V4A to receive commands from your DirecTV remote.

There are no reviews for this product.