Wireless Speakers With Auxiliary Input

Speco Technologies Pbm120a Public Address Amplifier With Module Bay

Product Code: ga182120
Availability: In Stock

$2,188.50 $3,260.86

Qty

0 reviews Write a review

Description
Reviews (0)

Powering 120W into 70 or 25V commercial speakers—or 4, 8, and 16 Ohms systems—the PBM120A from Speco Technologies is a public address amplifier and mixer designed for any situation in which music-on-hold (MOH) is a must. This amplifier features connective options for AM and FM antennas, as well as three pairs of RCA auxiliary channels, three balanced microphones, one RS-232 (for console control) and a terminal TEL input. In addition to its five 70 or 25V zones for commercial speakers and its 4/8/16 Ohm outputs, the PBM120A also gives you the option to route outgoing signal via RCA or XLR connections.

Turn your attention to the front panel and you'll notice a panoply of controls. Note, for instance, the six zone selection buttons; with these, you can turn specific speaker runs on or off. The front panel is adorned with level controls over each input, as well as a master volume output, and an input selector for the auxiliary channel. Use this feature to choose between a sound-source plugged into the amplifier or any module you have racked into its outstanding free space (specific modules available separately).

Additionally, the PBM120A provides connection possibilities for telephone paging and music-on-hold applications, including a priority paging switch which mutes all other channels when signal is passing through the microphone 1 input. This unit includes an IR remote control and a set of rack-mounting hardware.

120W into 70/25 V and 4/8/16 Ohm Loads Multiple XLR, RCA, and Terminal Inputs 5x Zoned Output Terminals XLR or RCA Outputs for Ancillary Amps RS232 Input for Automated Remote Control Priority Paging Switch for Auto-Mute Included IR Remote Control Included Rackmount Hardware Kit

Key Specs
Number of Channels	5
Amplifier Power Rating	120 W RMS 240 W Peak
Load Impedance / Voltage	Non-Zoned: 4 / 8 / 16 Ohms Zoned: 70 / 25 V
Audio I/O	1x Stereo RCA Unbalanced Aux/Line Output 1x XLR 3-Pin Aux/Line Output 3x Stereo RCA Unbalanced Aux Input 3x XLR 3-Pin Balanced Mic Input 1x Barrier Strip Telephone Input 1x Barrier Strip MOH Output
Amplifier
Form Factor/Type	Tabletop
Number of Channels	5
Number of Zones	5
Amplifier Power Rating	120 W RMS 240 W Peak
Load Impedance / Voltage	Non-Zoned: 4 / 8 / 16 Ohms Zoned: 70 / 25 V
Performance
Frequency Response	50 Hz to 20 kHz
SNR	> 89 dB
THD	< 1% (1 kHz)
Signal Processing
EQ	Treble: ±10 dB Bass: ±10 dB
Connectivity
Audio I/O	1x Stereo RCA Unbalanced Aux/Line Output 1x XLR 3-Pin Aux/Line Output 3x Stereo RCA Unbalanced Aux Input 3x XLR 3-Pin Balanced Mic Input 1x Barrier Strip Telephone Input 1x Barrier Strip MOH Output
Other I/O	1x Push Terminal AM Antenna Input 1x BNC FM Antenna Input 1x DE-9/DB-9 RS-232 Input
Power
AC Input Power	115 VAC, 60 Hz
Power Consumption	200 W
Physical
Dimensions	16.9 x 3.4 x 11.8" / 42.9 x 8.6 x 29.8 cm
Weight	26.5 lb / 12 kg
Packaging Info
Package Weight	26.8 lb
Box Dimensions (LxWxH)	22 x 17 x 9"

Module bay
Includes IR remote and rack-mounting kit
5 zoned 70 or 25V speaker outputs
Non-zoned 4/8/16 Ohms output
Master digital volume control with display
Individual volume control for each input
Front bass and treble controls
Phantom power for all mic inputs
Mic 1 selectable for priority paging
Digital front panel lock
RCA or XLR line output
Telephone paging input and music-on-hold output
RS232 input for integration with popular control systems

Related Questions and Answers

Q: 1. Is the rugged shell removable? It's just a hair too tall to fit on my desk...wish it was at the height of my Mac Studio :(

A: The outer casing of the Glyph Technologies Blackbox PRO is not designed to be removed.

Q: 2. Has any Windows user been successful with reformatting this?

A: Yes, the Glyph Technologies 8TB Atom Pro NVMe Thunderbolt 3 SSD can be reformatted for Windows devices in the "Disk Management" section for storage.

Q: 3. What comes in the box? cables, ect. Just curious.

A: Sorry for delay in answering. The Glyph Studio Raid comes with:STUDIORAID hard driveUSB 3.0 cableFireWire 800 cableIEC Power CableBest,Mayson Peffermpeffer@glyphtech.com

Q: 4. Looking at the picture displayed it shows FireWire and eSata. Where are the thunderbolt ports?

A: Check the picture again, they might have put up an incorrect one before. This unit only has: 2 x Thunderbolt 2 | 1 x USB 3.0 Type-B

Q: 5. I have about 6 terabytes of movies to transfer off my m1 MacBook, will the 8 terabyte SSD handle that kind of transfer well?

A: You can use the Glyph Technologies 8TB Atom Pro NVMe Thunderbolt 3 SSD BH #GLA8000PRO2 to move large amounts of data off a MacBook.

Q: 6. For RAID1, if one of the drive fails, can the other drive be removed and the data extracted?

A: Yes, you can remove the drive and extract the data on the Glyph Technologies StudioRAID mini.

Q: 7. May I use this with USB-C 3.1 gen 2 instead of 3.2 gen 2?

A: Yes, the Glyph Technologies 40TB Blackbox PRO RAID 2-Bay RAID Array can be used with a USB-C 3.1 Generation 2.

Q: 8. Is there a way to use this as a sing unit as a 8TB drive (with no redundancy)?

A: Yes, the Glyph Technologies StudioRAID can be used in RAID0 mode to have full access to the 8TB capacity. The unit comes preconfigured this way.

Q: 9. Will this work with AKG P120?

A: No, per the specs on these products; the mic is over 2" and the holder on;y allows for mics up to 48mm( 1.89") Auray holder: For Cylindrical Mics Between 42 and 48mm AKG P120 Physical Dimensions ø: 2.13 x L: 6.5" / ø: 54 x L: 165.1 mm

Q: 10. Are there instructions on how to install the replacement Suspension Bands for this model?

A: B & H please post the instruction manual for this item in PDF format. There is nothing listed for this product.The Senal SC-550X kit includes this shockmount, but no instructions on how to install replacement Suspension Bands.