MyMonitorII from ART is a personal monitoring solution that blends any microphone source with any stereo and instrument source. The microphone features a thru port that allows a direct connection with a mixer and passes +48V phantom power for condenser microphones. The line/instrument input also features a thru port connecting to a mixer.

Additionally, the microphone input features an on/off switch to locally mute the signal without creating any pops or noise. The headphone section features a single level control for both 1/8" and 1/4" outputs. MyMonitorII can be powered by an optional 9V battery or via the included power adapter.

Blend Mic, Instrument, & Stereo Sources    Mic Input and Thru w/ Silent Mute Switch    Pass Thru +48V Phantom Power    Instrument/Line Input and Thru Jacks    Stereo Monitor Input w/ Blend Control    Headphone Outputs: 1/4" and 1/8"    Operates on 9V Battery    Includes Power Adapter

• Blends any microphone, instrument and stereo source for personal monitoring
• Microphone input and thru with pop-less on/off mute switch
• Passes phantom power for operation with condenser microphones
• Instrument/Line input and thru jacks
• Stereo monitor input with blend control
• Headphone output section has 1/8" and 1/4" jacks
• High performance, low noise circuitry
• 9V battery and 12 VDC power operation

Related Questions and Answers

Q: 1. is the MULTI, LANC, or A/V-R connector included in the package?

A: MULTI is included (this cable is the good one for all Sony cameras since 2014)Other cables are available on B&H and Movensee web site

Q: 2. What voltage are the various units requiring. ie to use a battery pack where there i s no power. ?

A: This specification is not specified by the manufacturer. Please contact PIXIO directly for additional details: ccc@movensee.com

Q: 3. How well is the tracking when zoomed in at 15x? The angle change on the camera head will be very slight, but needs to keep the speaker centered.

A: The tracking will work much better with a wide angle as opposed to zoomed in to that degree.

Q: 4. How to connect to laptop for USB power?

A: I am not aware of an option to provide this with USB power. This comes with a power supply for use with wall plugin power only.

Q: 5. Could this be used to record directly from a mixer's XLR out to an iPhone or iPad?

A: Yes. That is the purpose of this cable.

Q: 6. Do you need WIFI for the remote to work? What if you are out in a field where there is no WIFI?

A: nope i am in an area that has no wifi or cell reception. I was able to track inside and outside

Q: 7. If the beacons and robot are permanently installed in a room and have been centered once do you have to center them every time you power off and back on?

A: Once your beacons and robot are setup for one location, you will not have to center the units again. You will only need to center the units once the robot and beacons are moved to a different location.

Q: 8. Can the watch be carried in a pocket? Does it have to be visible to the camera/beacons?

A: It is designed as a watch, so wearing it would be optimal. However line of sight is not required, so it should be possible to use the watch in a pocket rather than being worn.

Q: 9. Is it possible to pause the tracking from the watch if you want it to stop tracking you momentarily?

A: You will have access to stop the video recording when wearing the watch, but the Pixio will continue to physically track the subject.

Q: 10. Do you carry the armband for this system? The watch tag is large and therefore quite uncomfortable to wear on the wrist while riding a horse.

A: I am sorry, we do not offer an armband for this product.