The Cool-Lux SHIFT Baseplate is a multi-purpose shoulder mount rig designed for large and mid-size cameras. Attach a handgrip, and you have a full solution. Different handgrips (telescoping and walnut) are available from Cool-Lux. But, you can also upgrade it with cheeseplates and counterweights from Cool-Lux, for standard, cine, and ENG applications.

At the press of a button, the SHIFT Baseplate releases a flip-out chest support bar that helps balance the rig. When the bar is released, a soft and durable shoulder pad is also made available. When you fold it back up, it provides 1/4"-20 and 3/8"-16 threaded tripod mount holes. The resting position of the bar is adjustable to different body types.

The SHIFT Baseplate offers front and rear 15mm rod ports with 1.9" of vertical adjustment on both sets, and it comes with 8" and 4" pairs of carbon fiber 15mm rods. The camera plate is adjustable 4.5" along a dovetail for properly balancing your camera.

Compact Shoulder Rig for Sony FS7    SHIFT Baseplate with Flip-Out Chest Bar    Rosette Adapter for FS7 Handle    8" 15mm Rod for FS7 Viewfinder    Universal Cheeseplate    Silicone Foam Shoulder Pad    Front/Rear Rod Ports, 1.9" Adjustment    8" and 4" Carbon Fiber 15mm Rods    4.5" of Dovetail Camera Plate Travel    1/4"-20 and 3/8"-16 Tripod Mount Holes

• Compact shoulder rig for large and mid-size cameras
• Flip-out chest support bar
• Front and rear rod ports with 1.9" of vertical adjustment
• 8" and 4" carbon fiber 15mm rods
• Soft, durable, silicone foam shoulder pad
• 1/4"-20 and 3/8"-16 tripod mount holes
• 4.5" of sliding dovetail camera plate travel
• Upgradeable with handgrips, cheeseplates, and counterweights from Cool-Lux

Related Questions and Answers

Q: 1. Can anyone tell me what size I should buy for sony 24-105 g f4?

A: For the Sony 24-105mm f/4 lens, you will need a 76-77.9mm ring. https://www.bhphotovideo.com/c/product/1219602-REG/cool_lux_lg7677_luxgear_76_to_77_9mm.html

Q: 2. Will this work on a Leica R 35mm f2?

A: Check your focus ring diameter. If it's between 60-61,9mm this ring will work. On the Lux gear site there are helpful charts and indications. Good luck

Q: 3. Would this fit the Nikon 24-70 2.8 ED lens?

A: I have several Nikon Nikkor lenses and purchased a few Cool-Lux LuxGears to fit them. The Cool-Lux website has charts showing which gears go with which lenses, but I actually measured the circumference of each of my lenses to determine the proper sizes to order. And, the rings I ordered fit perfectly.

Q: 4. Does it fit with the Canon 17-40 f4 L series lens, 24-105 f4 L series and 16-35 f4 L series? thanks

A: This ring is compatible with the 17-40mm F4 lens. However for the 24-105 F4 and the 16-35mm F4 you will need the Gear Ring that works with an outer diameter of 82 to 83.9mm which is BH #COLG8283. https://bhpho.to/2N5CJfx

Q: 5. Hi, I'm looking to replace the 12 volt batteries on an old arri sr2 camera, and was interested in purchasing this battery belt... Would it be suitable and easy to use in conjunction with this camera as it requires 12v to power?

A: If the camera you are using has a 4 Pin XLR input for power, this may work with it. However we are unable to speak to how any particular product we offer will work with vintage gear. You would need to test it out to see the results.

Q: 6. Will this fit a Canon 17-55mm f/2.8 IS EF-S?

A: It will not. The Canon 17-55mm F/2.8 has a 83.5mm diameter. Instead you would need B&H # COLG8283 which works with lenses between 82 to 83.9mm. https://bhpho.to/2wf9Uo5

Q: 7. what size is needed for the sony 24-70 version ii? what about the 70-200 ii (Gmaster lenses)

A: To find the correct size for your lens, please follow the instructions on this page. https://store.cool-lux.com/collections/luxgears

Q: 8. Will this mount work with my flee world monitor? and if not is there a way to change the mount piece so that it will work with my canon Vixia hf 200?

A: Yes, this adapter will work on the Canon HF 200, and your monitor should be able to mount the adapter.

Q: 9. Will this work with the neewer follow focus?

A: This features standard 0.8-mod/32-pitch geared teeth. If it will work depends on the exact follow focus, but it more than likely will work.

Q: 10. Sir , I have 3 lens include Canon 1635mm , Canon 24105mm and Sigma 70200. I want to ask which 3 focus ring of your products are suitable for my lens ? Thank you.

A: This is from the Cool-Lux website. No listing for Sigma.16-35 f/2.8L (focus ring) LG7677 76.2 16-35 f/2.8L (zoom ring) LG7273 72.224-105 f/4L (focus ring) LG8283 82.2 24-105 f/4L (zoom ring) LG7879 78.6