The Classic Cool-Rig with Cheeseplate from Cool-Lux is a compact shoulder mount solution designed for large and mid-size cameras. At its core it features the multi-purpose SHIFT Baseplate, and is complete with a hand-finished walnut handgrip and universal rod-mount cheeseplate.

At the press of a button, the SHIFT Baseplate releases a flip-out chest support bar that helps balance the rig. When the bar is released, a soft and durable shoulder pad is also made available. When you fold it back up, it provides 1/4"-20 and 3/8"-16 threaded tripod mount holes. The resting position of the bar is adjustable to different body types.

The SHIFT Baseplate offers front and rear 15mm rod ports with 1.9" of vertical adjustment on both sets, and it comes with 8" and 4" pairs of carbon fiber 15mm rods. The camera plate is adjustable 4.5" along a dovetail for balancing your camera.

The walnut handgrip comes on a single rod clamp and is adjustable via a rosette adapter secured to the clamp. The cheeseplate will allow you to mount battery plates, recorders, transmitters, receivers, and other accessories on the rear. It has mounting holes for Gold-Mount and V-Mount battery plates and for the AJA Ki Pro and Teradek Bolt transmitters. It also has 1/4"-20 and 3/8"-16 threaded holes for articulating arms and various other accessories, and a center slot for mounting anything with two 1/4"-20 taps spaced up to 2" apart. Two 1/4"-20 screws are included for use with the center slot.

Compact Rig for Large & Mid-Size Cameras    SHIFT Baseplate with Flip-Out Chest Bar    Hand-Finished Walnut Rosette Handgrip    Universal Cheeseplate    Silicone Foam Shoulder Pad    Front/Rear Rod Ports, 1.9" Adjustment    8" and 4" Carbon Fiber 15mm Rods    4.5" of Dovetail Camera Plate Travel    1/4"-20 and 3/8"-16 Tripod Mount Holes

• Compact shoulder rig for large and mid-size cameras
• Multi-purpose SHIFT Baseplate with flip-out chest support bar
• Hand-finished, ergonomic, rosette adjustable walnut handgrip
• Universal cheeseplate
• Front and rear rod ports with 1.9" of vertical adjustment
• 8" and 4" carbon fiber 15mm rods
• Soft, durable, silicone foam shoulder pad
• 1/4"-20 and 3/8"-16 tripod mount holes
• 4.5" of sliding dovetail camera plate travel

Related Questions and Answers

Q: 1. Which size would fit best on a mk.2 sony gm 70-200mm f2.8 lens? I have seemed to have ordered the incorrect size as i thought it went by filter diameter

A: Unfortunately Cool-Lux does not have the gear size for this lens model. Please use the following ruler to measure your lens for the correct size https://bit.ly/3a9ObVB Cool-Lux tested lens chart https://bit.ly/3N2RMDH

Q: 2. Would this fit the Nikon 24-70 2.8 ED lens?

A: I have several Nikon Nikkor lenses and purchased a few Cool-Lux LuxGears to fit them. The Cool-Lux website has charts showing which gears go with which lenses, but I actually measured the circumference of each of my lenses to determine the proper sizes to order. And, the rings I ordered fit perfectly.

Q: 3. What is the max length and max width of these 2 dividers: the 20 L and 30 L?

A: Here are the dimensions for the Peak Design V2 30L Everyday Backpack Divider and the 20L version of this: 20L Everyday Backpack Divider - 24.8 x 24.2 x .5 cm. 30L Everyday Backpack Divider - 26.2 x 24.8 x .8 cm.

Q: 4. can you put quasar tubes inside?

A: Unfortunately, Quasar LED tubes cannot be fitted into the Impact Forever Ready Cool 4-LED Tube Light Panel.

Q: 5. Will this mount work with my flee world monitor? and if not is there a way to change the mount piece so that it will work with my canon Vixia hf 200?

A: Yes, this adapter will work on the Canon HF 200, and your monitor should be able to mount the adapter.

Q: 6. Is this the proper one for the Olympus 12-40 2.8 pro?

A: The Olympus lens has a sizing of 69.9 which will be able to work with that follow focus ring.

Q: 7. Will this fit a Canon 17-55mm f/2.8 IS EF-S?

A: It will not. The Canon 17-55mm F/2.8 has a 83.5mm diameter. Instead you would need B&H # COLG8283 which works with lenses between 82 to 83.9mm. https://bhpho.to/2wf9Uo5

Q: 8. Will this fit a Sigma 24-105 ?

A: It will not. The Sigma 24-105mm, BH #SI241054C, has an 88.6mm front diameter. It is too large for this gear ring. Instead you will need BH #COLG8889 which is for lenses between 88 to 89.9mm. https://bhpho.to/3bnrtEK

Q: 9. does it work on panasonic leica 10-25mm F1.7 lens?

A: It does not. That lens has an 87.6mm diameter. Instead you will need BH #COLG8687 which works with an outer diameter between 86 to 87.9mm. https://bhpho.to/3d01Rzi

Q: 10. Sir , I have 3 lens include Canon 1635mm , Canon 24105mm and Sigma 70200. I want to ask which 3 focus ring of your products are suitable for my lens ? Thank you.

A: This is from the Cool-Lux website. No listing for Sigma.16-35 f/2.8L (focus ring) LG7677 76.2 16-35 f/2.8L (zoom ring) LG7273 72.224-105 f/4L (focus ring) LG8283 82.2 24-105 f/4L (zoom ring) LG7879 78.6