The Aten CE600 DVI KVM Extender is a DVI and USB based KVM Extender with RS-232 serial functionality. It allows access to a computer system from a remote console (USB keyboard, monitor, and mouse), gearing it towards use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location - away from the dust and dirt of the factory floor, or the harsh environmental influence of a construction site, for example. This allows you to deploy system equipment over large distances.

The CE600 users one Cat 5e cable (DVI Single Link) to support up to 1920 x 1200 video resolution. The 2nd Cat 5e cable is used for HDCP, RS-232, and microphone signals.

Local and remote units connect at distances up to 200' using Cat 5e cable

Allows access to a computer or KVM installation from a remote console up to 200' away

Allows A/V transmission over one Cat 5e cable

The 2nd Cat 5e cable is used for HDCP, RS-232, and microphone signals

RS-232 serial ports - connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud rate 115200 bps)

Audio enabled - supports stereo speakers and microphone

Pushbutton operating mode selection (local unit only) - select between local and auto operating modes, with the press of a single button

Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)

Supports widescreen formats

Up to 1920 x 1200 @ 60 Hz at 100'; 1024 x 768 @ 60 Hz at 200'

Hot pluggable

Rack mountable

No software required - connecting cables to the devices is all it takes

Related Questions and Answers

Q: 1. I have a Mac Pro Tower, i want to send signal from my computer(dvi) to atem pro 4k. either 1080p60fps or 30fps. Will this be able to do these formats ? I want it to match with the studio camera. how do you change the output signal ?

A: I did buy this but ended up using a HDMI to SDI connector for this task from a MBP laptop and Mac Mini. I used a Black Magic Mini Converter HDMI to SDI. I then used a SDI to Thunderbolt to send video back to each machine. Search on B&H for Blackmagic Design CONVMBHS2

Q: 2. Does it come with a french keyboard layout?

A: No, this ATEN CL6700MW DVI Full HD LCD Console has a USA keyboard layout.

Q: 3. Does this unit pass HDMI audio from the inputs out of the stereo audio port on the front or back?

A: The HDMI ports only support video. Audio would have be passed through via audio ports.

Q: 4. i assume this will work if i have a single mac mini server in the rack? just hook up hdmi and keyboard mouse usb ports from unit to the mac? all should work? thanks!

A: Yes, you can connect the ATEN CL6700MW DVI Full HD LCD Console to a Mac mini via an HDMI cable.

Q: 5. how to install?

A: You just plug the video cable inputs into the computers and the output side into the monitor. You also have to plug in the USB cable into at least one of the computers for power. Once it is all connected, you just use the button to flip between computers.

Q: 6. how to switch from one to another.?

A: You would be able to switch between the two devices using this ATEN CS64U 4-Port USB KVM Switch, by pressing the "HOT Keys" on your Keyboard.

Q: 7. Can i use USB hub with remote unit to connect USB camera and USB mic other than keyboard and mouse?

A: No, the USB ports on the SV565UTPU is designed to connect to a keyboard and mouse. Atha, StarTech.com Support

Q: 8. Does this cable come with its own power adapter?

A: Yes, the ATEN USB 3.2 Gen 1 Extender Cable comes with a power adapter.

Q: 9. Can I just buy the adapter? Only adapter. It's broken.

A: It is possible the adapter you need is a Manufacture's Part. Please email us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a and we will be able to better assist you find the part you need.

Q: 10. Can I get this rackmountable ?

A: This is rack-mountable. The rack mounting kit is included in the box.