Guitar Amplifier Power Stroke

Ashly 8-channel 2000w Network-enabled Power Amplifier With Opdac8 & Cobranet Cards (70v)

Product Code: ga182261
Availability: In Stock

$11,547.00 $16,281.27

Qty

0 reviews Write a review

Description
Reviews (0)

The 8-Channel 2000W Network-Enabled Power Amplifier from Ashly delivers a minimum power of 250W RMS power per channel into 70V loads with all channels operating. The amplifier features pre-installed OPDAC8 internal 8-channel digital to analog converter & CobraNet network audio interface card; and is designed around an energy efficient Class-D platform with a switching power supply. When switched into bridged-mono mode, channels 1+2 or 3+4 or 5+6 or 7+8 of the amplifier delivers over 500W RMS into an 140V load.

The power amplifier includes Euroblock input connectors, Euroblock output connectors, and balanced analog inputs. Besides remote standby for power up, DC remote level control, and contact closure preset recall, the amplifier also features Ethernet control & monitoring of power functions, level, mute, polarity, temperature, current, and amplifier fault conditions. The front panel indicates power status, standby, protect, power switch On/Off, signal level, bridge, temperature & current levels, and Ethernet communication. The amplifier mounts in a standard 19” rack using two spaces (3.5” high).

Amplifier
Frequency Response	20 Hz to 20 kHz, (unweighted) ± 1 dB
Input Impedance	20 kOhms, balanced
Voltage Gain	32 dB
Input Sensitivity	7.2 dBu
Maximum Input Level	+21 dBu
Software Control	80 Hz (12 dB/oct), 400 Hz (6 dB/oct), Off
Distortion	8 Ohms load: < 0.5 % typical (SMPTE) < 0.5 % typical (20 Hz to 20 kHz) (THD-N)
Damping Factor	> 250 (8 Ohms, 1 kHz)
Circuitry	Class D
Maximum load protection	Output Overcurrent, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting, Mains Fuse
Controls	Remote standby, Preset recall (4), Remote Level (8), Remote Data
Connectors	Input/Output: Euroblock (each channel)
Required AC Mains	120 VAC or 240 VAC, ±10% 50 to 60 Hz
Cable Connectors	15 A Edison, 3-Prong IEC
Signal to Noise Ratio	> 107 dB (20 Hz to 20 kHz, unweighted)
LED Indicators	Signal Level Red: Clip Yellow: -6 dB Green: -18 dB, -12 dB Bridge: Green per channel pair Temperature: Yellow per channel Current: Green per channel (proportional to output)
Output	250 W per channel
Current Draw	Standby Mode: 290 mA Idle (No Signal): 565 mA Typical (1/8 Power Pink Noise): 5.00 A Maximum (1/3 Power Pink Noise): 11.0 A
Thermal Dissipation	Standby Mode: 63.8 BTU/hr Idle (No Signal): 187 BTU/hr Typical (1/8 Power Pink Noise): 700 BTU/hr Maximum (1/3 Power Pink Noise): 775 BTU/hr
Dimensions	19 x 3.5 x 16" (48 x 8.9 x 41 cm)
Weight	20 lb (9.1 kg)

10/100 Ethernet for remote control and monitoring
70V constant voltage
CobraNet and OPDAC8 Input Cards
DC voltage remote gain control
Switched-mode power supply, Class-D output
Stepped & calibrated input attenuators
Remote power standby
All front panel controls can be disabled via software
Temperature-sensitive variable speed fan with front-to-back airflow
Selectable HPF frequencies (80 Hz, 400 Hz, off)
4-stage level meters
Output current and temperature indicators
cTUVus, CE, FCC, and RoHS safety/compliance

Related Questions and Answers

Q: 1. is the system 110-220v

A: The Yamaha RX-V4A will only be 120 V / 60Hz capable as the unit we list is mainly meant for the US market.

Q: 2. Can this operate with R&L speakers & Center only?

A: The Yamaha RX-V4A supports Front Left, Front Right, Front Center, Surround Left and Surround Right, with 2 preouts for use with up to 2 subwoofers, making it a 5.2 channel AV receiver.

Q: 3. Will my Yamaha compact disc unit work off this awesome receiver?

A: Yes you would connect the compact disc unit to one of the stereo RCA inputs on the Yamaha RX-V4A for that compatibility.

Q: 4. will this receiver be OK with 8 ohm speakers?

A: Yes, while the specs only mention the rating at 6 ohms, this receiver can be safely used with 8 ohm speakers. The higher the speaker impedance, the lower the effective wattage will be.

Q: 5. 8k?

A: The Yamaha RX-V6A supports 4K UHD Upscaling & Pass-Through.

Q: 6. Will the speaker connection accept banana plugs? What size? Thanks.

A: Yes it will accept banana plugs. The size is 4mm.

Q: 7. Can this AVR be added to Google Home Speaker Groups?

A: Not natively, it would require a Google home device connected to it.

Q: 8. Does this receiver have 120 hertz video pass through ?

A: Yes the Yamaha RX-V6A supports HDMI 2.1

Q: 9. Will this unit accept RF commands from Direct TV remote??

A: Yes you would be able to set up the Yamaha RX-V4A to receive commands from your DirecTV remote.

Q: 10. Can this unit be put in an enclosed cabinet and still work with the factory remote?

A: The remote would need to be in line of sight of the receiver.