The Pipeline 2' Raw 5600K Pipe with 10' Cable and 3-Pin XLR Connector from BBS is a remote phosphor LED softlight with a wide coverage of 180 degrees and a high TLCI rating of 95+. This version of the pipe is sold without a required driver or dimmer so that you may use your own. The 3-pin XLR connector allows plug-and-play functionality with the optional 4-Way Controller. The controller can handle up to 4 Raw Pipelines and control dimming manually or via DMX as well as CCT adjustments for 3200/5600K mixed setups.

TCLI: 95+    Manual Dimming or DMX 512    Flicker-Free Dimming from 100%-0    Wide 180º Light Dispersion    High Light Output

Related Questions and Answers

Q: 1. Will a 5.5mm x 2.1mm x 10mm coax connector fit the power socket??

A: The manufacturer does not specify the plug requirements. You will need to contact the manufacturer for a compatible power supply. Yongnuo Tel: (212) 594-2120 Website https://yongnuousa.net/

Q: 2. Does this take continuous pictures in manual mode?

A: Yes, I have not used the funcation yet, but if you hold on the button, it will take continouse photos.

Q: 3. What is the difference between lightning bug plus and older lightning bug

A: The MK Controls Lightning Bug Plus uses a USB-C cable that allows the user to update firmware, change internal settings, and use an external battery to charge it. It also has longer battery life when compared to the previous version. It has improved detection of lightning strikes and also automatic sensor calibration. During power-on, the Lightning Bug Plus senses ambient light, and sets baseline sensitivity. It also includes full lifetime product warranty.

Q: 4. Can the included XLR cable be swapped out with other XLR cables? Or is it permanently mounted?

A: The XLR cable in the Deity Microphones ASM1 Adjustable Shockmount with Built-In XLR Connector Holder is affixed and cannot be removed.

Q: 5. I know the RS-C2II Wired Remote Switch cable itself is very short, is there an additional cable that I can purchase to attach to the RS-C2II Wired Remote Switch to increase the working distance of the Remote Switch from the camera? Thank you.

A: Unfortunately, there are no such cables to extend the working distance of the RS-C2II. However, you may be interested in taking a look at a wireless remote for Canon 3-pin connection cameras, such as the Vello Shutterboss Version II Timer Remote Switch: http://bhpho.to/1bjB88q

Q: 6. Does the light flicker? I see flicker in Cheesy Cam's review when the light is dimmed down low:https://youtu.be/_15aLmv-8zY

A: Emm has already addressed the above on his Cheesy Cam website review on this light fixture, which you may view on his website with his responses in the Comment section under the video. He stated that the units that he used were early prototypes of the Flolight Bladelight that he was sent from Flolight before final production. He admitted that the prototype had flicker when it was dimmed all the way down to its lowest setting (which it was for the video), but no longer flickered once the power was increased up to 10%, with no flicker from 10% to 100%. He stated it was due to the power supply he had on that particular light fixture, and his other power supply did not have the flicker issue, and that the final production versions of the light would be stable. Flolights are used often in television production studios and are known for being flicker-free light fixtures.

Q: 7. Will this work while tethered using the EOS Utility on a 5D Mk III?

A: It works on my 5D M-II

Q: 8. How many total pieces come in this kit?

A: The Matthews Pipe Spreader is made up of two pieces.

Q: 9. What are the dimensions of the light panel?

A: We would estimate the size of this light as 13 x 9.5 x 1.7.

Q: 10. will this work with mirror up and 2-second timer function on 5Dmkiv?

A: Yes, the Vello RS-C2II Wired Remote Switch for Select Cameras with Canon 3-Pin Connector will work on a Canon EOS 5D Mark IV DSLR Camera while the mirror is up, and with a 2 second timer on.