You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Nanuk 918 Hard Case With Padded Dividers (olive, 21l)

Nanuk 918 Hard Case With Padded Dividers (olive, 21l)
  • Product Code: ga182310
  • Availability: In Stock

$743.85 $1,138.09

Store, transport, and protect your valuable gear from dirt, dust, moderate impact, and moisture with the 21L, olive 918 Hard Case with Padded Dividers from Nanuk. It has an IP67 rating, a built-in purge valve, a robust top handle, and a bezel system with an O-ring. Carry the 918 case using the top handle, or with an optional, separately available shoulder strap. For extra security, the case accepts user-supplied padlocks. Users will appreciate the handle and lid stays, as well as the impact-resistant, NK-7 resin construction, and stainless steel hardware.

Watertight and Dustproof    2 PowerClaw Latches    Padded Dividers    Impact-Resistant NK-7 Resin Construction    Built-In Purge Valve and Top Handle    Accepts User-Supplied Padlocks    Connection for Optional Shoulder Strap    Bezel System with O-Ring    Stackable Design, Handle and Lid Stays    Stainless Steel Hardware

Key Specs
ColorGreen
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeAdjustable Dividers (Hook & Loop)
Water ResistanceWaterproof
IP67
DimensionsExterior
16.9 x 12.9 x 9.3" / 42.9 x 32.8 x 23.6 cm
Interior
14.9 x 9.8 x 8.6" / 37.9 x 24.9 x 21.8 cm
2.1" / 5.3 cm (Lid Depth)
5.5" / 14 cm (Base Depth)
Weight6.4 lb / 2.9 kg
Parameters
Camera CompatibilityUniversal
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeAdjustable Dividers (Hook & Loop)
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
Maximum Buoyancy40 lb / 18.1 kg
Padded InteriorYes
MaterialsExterior: Resin
DimensionsExterior
16.9 x 12.9 x 9.3" / 42.9 x 32.8 x 23.6 cm
Interior
14.9 x 9.8 x 8.6" / 37.9 x 24.9 x 21.8 cm
2.1" / 5.3 cm (Lid Depth)
5.5" / 14 cm (Base Depth)
Weight6.4 lb / 2.9 kg
Packaging Info
Package Weight8.82 lb
Box Dimensions (LxWxH)17 x 13.6 x 9.6"

Two PowerClaw latches

Dust resistant, waterproof, and submersible to 3'

Made from impact-resistant NK-7 resin with stainless-steel hardware

Accepts user-supplied padlocks

Integrated lid stay

Top and bottom panel mounts

Bezel system

Removable hinge pin

Handle stay

Stacks with other 918 cases

Screw bosses in lid for mounting accessories

Touch-fastening dividers for customized gear placement

Integrated shoulder strap attachment

Related Questions and Answers

Q: 1. Will it be possible to balance a GH5 with 100-400mm lens? The lens isn't particularity heavy but does extend way out in front of the camera?

A: Hey Charles. We haven't tested out this specific setup, but according to our tests, the Ronin-S can capture stabilized footage with a 5D Mk IV + EF 85mm f/1.4L IS USM lens in handheld scenarios.

Q: 2. Im Wondering will this Work with a Canon 70D and a sigma 18-35. I have a beholder DS1 and the lens is too long so the camera body hits the back motor wondering will this do the same even though the different design

A: Again not tested. However, DJI says Canon cameras and their lenses can be remotely controlled.

Q: 3. what is the minimum payload? can i use my canon m6 with the 22mm f2.0 lens?

A: DJI does not list minimum payload. It is our opinion that the Ronin S can fly the M6 and lens.

Q: 4. Camera Control via Included Cables for Lumix GH4 and GH5?

A: With the GH4 you will be able to start/stop recording video, and capture photo. The GH5/s will be able to start/stop recording video, and capture photo, pull focus (with supported lenses) and adjust camera parameters.

Q: 5. Does this come with a warranty?

A: This product has a one year, limited manufacturer's warranty on the gimbal and a 6 month warranty on the motor.

Q: 6. can I use this one with a canon eos rebel t5i o a canon 7D?

A: Yes, the DJI Ronin-S Essentials Kit is compatible with both the Rebel T5i and 7D.

Q: 7. Can the Sony PXW-Z90V work on the Ronin-S ?

A: Normally we have to just say no to camcorders. However, the PXW-Z90V is small enough that it might fit as well as balance. If it does, please report back what you have found out.

Q: 8. Trying to connect my Sony A7riii with the Ronin. I keeping getting the message on my camera: USB Mode Connecting but it never connects. I'm sure there is a simple step I'm missing but I can't figure it out. What am I doing wrong? Help!

A: It doesn't work with Sony via usb. You have to use the IR wire

Q: 9. What is the distance the Mobile App (IOS) will work. I say documentation that said only 10M using bluetooth. This is very limited distance, does anyone know for sure if it is only 10M?

A: When controlled via the Ronin mobile app, the range is around 10 meters according to DJI.

Q: 10. It's full function comparable canon 80D

A: According to the latest information from DJI they are working on a USB Shutter Control for the Canon 80D that will offer more control over the camera when using the Ronin-S.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Benro 77-82mm Step-up Ring

$45.00 $58.50

Lowepro Gearup Wrap (gray)

$57.45 $82.15

Polarpro Brass Step-up Ring (55-67mm)

$119.97 $189.55

Polarpro Brass Step-up Ring (52-67mm)

$119.97 $151.16

Seahorse 520 Protective Case (black)

$503.94 $771.03

Products You May Like

Tiffen 4 X 6" Black Diffusion/fx 5 Filter

$1,304.85 $1,735.45

K 5600 Lighting 400w Optical Beamer

$3,045.00 $4,476.15

Tiffen 4 X 5" Glimmerglass 2 Filter

$1,130.85 $1,424.87