The future backbone of your IT & IP cable infrastructure starts and stops with a Belden Category 6A 10GXS cable built by Laird. The continuing evolution of HDBaseT, HDBitT, DANTE and other similar standards for HD video and Digital Audio IP packetization methods demand the bandwidth of a Category 6A solution. Built Laird tough with Belden 4-pair, 23 AWG UTP copper 10GX cable that exceeds the ANSI/TIA-568-B.2-10 Category 6A standard and is ready for your high speed Local Area Networks (LANs), Server Farms, Storage Area Networks (SANs) and any other heavy data traffic environment.
In addition to its super high bandwidth advantages, the Laird 10GXS saves you up to 25% on space reducing the Rats Nest in your Data Center with its small diameter (0.295 inches!), lightweight and superior flexibility helping you make easy connections in high density applications. Plus, its reduced cross-talk helps protect your data in harsh EMI environments.
Horizontal Cable and RJ45 Category 6a Shielded Modular connectors they are the perfect companion for Cat6a HDBaseT Ethernet Convertors and Extenders as well as being backwards compatible to perform perfectly with existing Cat6/5E components.
Rest easy knowing your signal is always streaming with a Laird CAT6A-HBDT high speed Ethernet Cat6A cable specifically designed for use in your Data Center Installation. Small Diameter, High flexibility, Fully Shielded, that's the Laird CAT6A-HBDT High Speed Ethernet Cat6A Cable!

• Belden 10GX cable offers higher density and reduced crosstalk
• Small diameter and flexibility for easier connections
• Electrical performance beyond Category 6A
• Backward compatible with Cat6/5e components
• Minimum performance of up to 250 MHz

Related Questions and Answers

Q: 1. Is the Sony a7C compatible?

A: No, the Zhiyun Cinema Camera Control Cable for CRANE 3S (Sony) would not work with the Sony A7C. The Sony A7C would require a USB-C to USB-C cable when used with the Zhiyun 3s gimbal. The following cable should work if you did not get a USB-C to USB-C cable with your gimbal. DJI R Multi-Camera Control Cable for RS 2/RSC 2/RS 3/RS 3 Pro (USB-C, 11.8") BH #DJRMCCCCBCC More info from Zhiyun: 1. Please select "PC Remote" for your camera's "USB Connection". 2. To trigger electronic focus, please set "Manual Focus (MF)" under “focus mode” Camera compatibility list: https://bit.ly/3oWMh2i

Q: 2. Can I use this reader on the 1tb red Cfexpress? I dont know why the specifications only say " 660 gb card "

A: The RED DIGITAL CINEMA CFexpress Card Reader is compatible with the RED DIGITAL CINEMA 1TB PRO CFexpress 2.0 Type B Memory Card. The card reader can work with up to 2TB media cards.

Q: 3. will this work with the canon R5C?

A: The Zhiyun Cinema Camera Control Cable for CRANE 3S is not compatible with the Canon EOS R5C, as the camera has no direct communication compatibility with this gimbal.

Q: 4. It support 2.5Gbe?

A: This item supports up to 2 x 10Gb Ethernet (RJ45) connections.

Q: 5. Will this ingest at 280MB/s? What's the highest it could go?

A: The RED DIGITAL CINEMA CFAST 2.0 Card Reader transfer speed will vary based on the connection being used on your computer (USB 3.1 vs 3.1 GEN 2 etc) and the card being used. If you use a card that has a read speed that is faster than 280MB/s then it is possible to get faster transfer speeds.

Q: 6. Will this allow focus and run/stop control from the Crane 3s to an FX9?

A: No, the Zhiyun Cinema Camera Control Cable for CRANE 3S (Sony) is incompatible between the Zhiyun CRANE 3S Handheld Stabilizer and the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only).

Q: 7. Does this support Jumbo Frames? (MTU value of 9000)

A: It currently does not. An upgrade in the firmware MAY do this in the future.

Q: 8. Will this work with the CFast Cards from the new BMPCC 6KPro?

A: Yes this will work with the CFast 2.0 Cards from the new BMPCC 6KPro

Q: 9. Hi I Will like to know if this batteries will charge with the former RED BRICK Charger. Thanks

A: The RED DIGITAL CINEMA RED BRICK CHARGER is a Vmount charger, so it is not compatible with the RED DIGITAL CINEMA REDVOLT XL-G Battery (156Wh, Gold Mount), but if you get the V-mount version then yes, the RED BRICK CHARGER would be able to charge the battery.

Q: 10. All i want is that lense cap on the mount ?

A: While this RED Canon EF body cap is not available from B&H at this time, we do have a great variety of body caps available. See the following link. https://bhpho.to/2ukaYnm