Styled in a white finish, the Genelec 8350A is a single SAM-Series, 2-way active studio monitor designed to provide accurate mix referencing with extended low frequencies and software control capabilities for audio engineers, musicians, and producers in project studios, medium- to large-sized control rooms, commercial facilities, or mastering rooms. It features 350W of Class-D amplification driving an 8” woofer and a 1” tweeter, producing a frequency response of 33 Hz to 22 kHz.

A proprietary waveguide enhances imaging, while the bass reflex port extends the low-frequency response. The die-cast aluminum enclosure is shaped to minimize diffraction and reflections. XLR connectors are provided for the balanced analog input and AES/EBU digital input and output. Built-in signal overload protection enhances dependability and protects the speaker. Rear-panel room compensation controls include levels and high- and low-frequency adjustments. Detailed frequency adjustments and automatic calibration can be performed via GLM (Genelec Loudspeaker Manager) software and the GLM User Kit (available separately). A selectable power-saving mode enables automatic power up/down via a signal-sensing circuit.

The 8350A offers multiple mounting options including an Iso-Pod isolation stand and threaded holes that are compatible with select K&M mounts and various wall/ceiling brackets.

8" Woofer, 1" Metal-Dome Tweeter    350W Class-D Amplification    Proprietary Waveguide, Bass Reflex Port    High- and Low-Frequency Controls    Supports Software Control & Calibration    Low-Diffraction Aluminum Enclosure    XLR Analog and Digital Inputs    Selectable Automatic Power-Saving Mode    Multiple Mounting Options    Includes Isolation Stand

• 6.5" woofer and 3/4" tweeter
• 150W LF amp and 150W HF amp
• 38 Hz to 23 kHz frequency response (-6 dB), 45 Hz to 20 kHz frequency response (±1.5 dB) 
• Proprietary waveguide utilizes DCW (Directivity Control Waveguide) technology for improved imaging and a wider listening area
• Bass reflex port provides extended low-frequency response
• Rear-panel room compensation controls including high- and low-frequency adjustments
• Supports automatic calibration via software control
• Low-diffraction aluminum enclosure utilizes MDE (Minimum Diffraction Enclosure) technology
• XLR connections for balanced analog input and digital AES/EBU input and output
• ISS (Intelligent Signal Sensing) automatic power-saving mode
• Multiple mounting options: Iso-Pod and threaded holes that are compatible with select K&M mounts and various wall/ceiling brackets
• Includes Iso-Pod isolation stand for vibration decoupling

Related Questions and Answers

Q: 1. Is this an 8-Bit or 10-Bit Monitor?

A: The ikan Atlas 3G-SDI/HDMI Field and Studio Monitor is 8-bit.

Q: 2. Will this fit Sony WH-XB900N?

A: The Sony Carrying Case for MDR-7500 Series Studio Headphones BH #SOLCMDRG will work exclusively with the Sony MDR-7520, MDR-7510, and MDR-7506.

Q: 3. will this work for the new MDR M1?

A: The Sony Carrying Case for MDR-7500 Series Studio Headphones (BH # SOLCMDRG) will fit the new Sony MDR-M1 Closed-Back Over-Ear Reference Monitor Headphones (BH # SOMDRM1).

Q: 4. would this hold a greenscreen?

A: This is a very solid stand that can bear a good bit of weight, especially if you use sandbags to counter any uneven loads. I don't know exactly what kind of green screen you have in mind, but two of these stands and some sort of crossbar would certainly hold a roll of green seamless paper.

Q: 5. Can this be used as a backdrop stand and is there a suitable crossbar that could go with this that is also made of durable material so that there is no bowing in the middle when the stand is fully extended and holding weight ten feet across?

A: I use these for background stands, but I attached a Superclamp to the baby pin at the top and then use a piece of 10 foot conduit, that is clamped into the Superclamp, I picked up the electrical conduit from Home Depot or Lowes in their electrical departments.The electrical conduit is NOT collapsible but is it available in various sizes for backgrounds with pockets and they typically will not bow unless you hang a LOT of weight from them.

Q: 6. Does this come with screws

A: Yes it comes with 4 screws.

Q: 7. What is the diameter of the lowest riser pole?

A: Its about 1 1/8th inches.

Q: 8. Can you view multiple cameras at once? If so how many?

A: This monitor will only display one image at a time. It does not offer a multi-viewer.

Q: 9. What are the outside dimensions of this case?

A: 10 at the tallest point x 9.5 at the widest point x 4 at the deepest point. Just happened to have a tape measure by the computer.

Q: 10. Will this hold a kino flo diva lite 400?

A: This stand can hold a Kino Diva 400.