Mount your Canon EOS C200 camera on a shoulder rig, tripod, or other rig and add accessories with this Baseplate from SHAPE. The system features a baseplate with 15mm LWS rod clamps, a camera plate, and two aluminum 15mm rods that measure 12" in length.

The baseplate features three 1/4"-20 screws to securely mount your camera, as well as multiple 1/4"-20 and 3/8"-16 mounting thread options. The baseplate features 1/4"-20 and 3/8"-16 tripod mounting threads on the bottom. The standard 15mm LWS rod clamps secure the included 15mm rods with locking levers, allowing you to add accessories such as a follow focus, matte box, and more.

Baseplate for Canon C200 Camera    Shoulder Pad and Back Pad    Dual Handgrips, 360° Rotation    4 x 15mm Rods, Offset 15mm Rod Block    1/4"-20 and 3/8"-16 Mounting Threads

Attaches underneath the camera via 1/4"-20 screws, and the camera adapter plate features 3/8"-16 and 1/4"-20 threads

Mount on a tripod or rig with 3/8"-16 and 1/4"-20 threads

The 15mm rod clamps on the baseplate secure two 12" long 15mm aluminum rods

The 15mm LWS design is designed to respect the C200 optical center

Four rubber pads at the top of the base protect and securely hold your C200 camera

Allen wrench attaches to the bottom of the baseplate via a magnet

Related Questions and Answers

Q: 1. Can this also work for the Canon C300 Mark II?

A: While there may be portions that will work, this is designed for use with the C200 only. We do not recommend using it with the C300 Mark II.

Q: 2. which rod block would i need to convert this to the straight not offset version so i could go either or?

A: Our best advice would be to purchase the non-offset version of the SHAPE Offset Shoulder Rig for ENG-Style Camcorder. SHAPE Shoulder-Mounted Baseplate for ENG-Style Camera BH #SHENGSM

Q: 3. Hola, tiene problemas de magenta en low light?

A: At this time we are not seeing wide spread reports of any magenta issue with the C200 or the C200B.

Q: 4. Does this rig fit the C70 camera as well?

A: This cage on this rig is designed to match the shape of the C200 which is significantly larger than the C70. The C70 will mount on the rig but the cage will be too large for the camera.

Q: 5. Is it include the extension cable?

A: Dear Hyunkee,Thank you for your message. The cable is not included in this package. So, please make sure to purchage this together with the handle.Also know that this handle is made to go directly onto the camera. if you are looking for an extension handle for a baseplate please look at the C200RH. This comes with the cable.Hope I informed you accordingly.With kind regards,Dirk

Q: 6. Is this model a better fit for the FS7 than the SHAPE FS5 shoulder rig?

A: Hello Nickolas,Thank you for your question! Actually, this unit was designed to fit the Canon C200, as its title says. If you're looking for a similar unit to fit the Sony FS7, we recommend you take a look at our FS7 lightweight plate. a href= https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs7-camera-supports/sony-fs7-lightweight-plate_585.aspx?id_page_parent=1181 target= _blank https://www.shapewlb.com/en/product/brands/sony-camera-supports/sony-pxw-fs7-camera-supports/sony-fs7-lightweight-plate_585.aspx?id_page_parent=1181/aFrom this baseplate, you can easily combine the same accessories to end up with a shoulder rig. Our lightweight baseplate was designed to respect the camera's optical center for the FS7. Which will not be the case with the unit you're asking about. We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 7. What follow focus accessories are needed to have a complete follow focus set up along with this (for c200)?

A: Most 15mm rod applicable follow focus units will work, as these can be mounted on the standard 15mm rod of this unit.

Q: 8. Microphones

A: The C200B has two XLR inputs which will allow you to use high quality professional microphones with it.

Q: 9. Can you record 4k 60p 4:2:2 10 bit to an external recorder like the atoms ninja inferno? If so, can you use C-log as well?

A: With the C200 you can output via the HDMI 3840 x 2160 QHD 4K at 59.94p 4:2:2 8-bit. Sorry, no 10-bit.

Q: 10. Is there a longer cable that could be purchased to go from body to monitor?

A: Because the cable is very complex due to the C200 monitor being touch screen, the only cable Canon offers is very expensive. If you need an off camera monitor, we suggest getting a conventional monitor and using an HDMI or SDI cable.