You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Rocstor Displayport Male To Vga Male Cable (6')

Rocstor Displayport Male To Vga Male Cable (6')
  • Product Code: ga182889
  • Availability: In Stock

$50.85 $68.14

With this DisplayPort Male to VGA Male Cable from Rocstor, you can connect your DisplayPort-equipped desktop or laptop computer to an older monitor or TV with a female VGA input. The cable supports content up to WUXGA resolution (1920 x 1200) without sacrificing video quality. This cable can also be used with compatible projectors and other video devices.

1 x DisplayPort Male Connector    1 x 15-Pin VGA Male Connector    6' Long    Supports Resolutions up to 1920 x 1200    Copper Conductor

General
Maximum Resolution Support1920 x 1200
Cable Length6' / 1.83 m
Physical
CertificationsCE, FCC, RoHS
Weight4 oz / 113 g
Packaging Info
Package Weight0.3 lb
Box Dimensions (LxWxH)7 x 6 x 0.7"

Related Questions and Answers

Q: 1. MacBook Pro 16" Needs 96 Watts or it will not charge. Can anyone here comment if they have or know of someone that has been able to charge his MacBook Pro 16" with less then 96 Watts like from this Hub?

A: That may depend on several factors but Apple advises that you always use the correct power adapter to charge your MacBook Pro. From their support page, "You should use the appropriate wattage power adapter for your Mac notebook. You can use a compatible higher wattage power adapter without issue, but it won't make your computer charge faster or operate differently. If you use a power adapter that is lower in wattage than the adapter that came with your Mac, it won't provide enough power to your computer." That noted, you can use a lower wattage adapter (low to a certain point) and it will charge a MacBook Pro but slowly. In this case, the OWC "dock can deliver up to 90W" which is lower than the 96 W needed. Another thing to note is that not all Thunderbolt cables have the same power rating. We carry Thunderbolt cables with 10 W, 60 W, and 100 W ratings so you will need to look for that too.

Q: 2. I have ordered both USB 6 and USB 8. Since unpacking, I have forgotten which is which. How can I tell them apart?

A: I do notknow

Q: 3. Will this cable work with the Olympus Stylus series? Mine is about 6-8 years old. It is waterproof, etc. I believe this series was the fore-runner to the TG models, maybe.

A: WILLIAM, I AM NOT SURE, BUT IF YOUR CAMERA USES THE PROPRIETARY OLYMPUS FORM FACTOR, IT PROBABLY WILL.

Q: 4. Does the ethernet port work out of the box or does it require a driver installation? And does the driver installation really require disabling SIP (System Integrity Protection) to work?

A: The OWC Thunderbolt Dock with Thunderbolt 4 Cable BH #OWTB4DOCK works out of the box and requires no driver installation. SIP does not need to be disabled.

Q: 5. Will this cable work with the OMD E-M1?

A: The CB-USB8 is compatible with the OM-D E-M1, yes.

Q: 6. Will this work with the 2020 13 inch M1 MacBook Pro?

A: Yes, the OWC Thunderbolt Dock with Thunderbolt 4 Cable BH #OWTB4DOCK is compatible with the 2020 13'' Macbook Pro M1.

Q: 7. My work computer is Thunderbolt 3 and my personal computer is thunderbolt 4, can I use this dock to plug both laptops into 2 monitors? I am setting up a home workstation and want to be able to swap laptops as needing using 1 docking station.

A: This dock cannot be used simultaneously by two machines, but can be used to hot swap between a T3 and T4 machine.

Q: 8. Is this dock compatible with 2021 iPad Pro 11" & 12" models for drive mounting? Also, does anyone know if there is card coping or file transfer iOS software? i.e. Shotput pro or hedge for iOS?

A: TheOWC Thunderbolt Dock with Thunderbolt 4 Cable BH #OWTB4DOCK is compatible with both models of the iPad Pro 2021. It can copy from an SD card into your Photos, from there, you can import them to any app that you use to do photo editing.

Q: 9. will this cable work with a tg-2 ?

A: It's hard to tell just from looking at the picture, but a CB-USB8 cable looks very much like the cable in the picture and the CB-USB8 cable that I bought from bhphotovideo that works with my Olympus TG-2.

Q: 10. I have a Dell Thunderbolt 3 docking station and ran out of ports on this device. Can I add the OWCTB4DOCK in a daisy chain connection, connecting it to the WD19TB on it's inbound TB3 port? The WD19TB will be directly connected to the PC's TB3 port.

A: Sorry, no, it will not work in a daisy chain. It must be directly connected to the host.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Iogear Displayport To Vga Adapter Cable

$29.85 $47.16

Kramer Vga Male To Vga Male Cable (10')

$62.40 $82.99

Products You May Like

Urth Nd Lens Filter Plus+ (105mm, 3-stop)

$555.00 $721.50

Neumann Wsb Foam Windscreen

$1,497.00 $2,305.38

Pelican 1626 Wheeled Air Case With Foam (black)

$1,268.85 $1,992.09