Microphone That Outputs To Bluetooth Speaker

Kramer 8-input Presentation Matrix Switcher/scaler With Seamless Video Cuts And 4k30 Output Support

Product Code: ga183437
Availability: In Stock

$11,856.00 $18,495.36

Qty

0 reviews Write a review

Description
Reviews (0)

The 8-Input Presentation Matrix Switcher/Scaler with Seamless Video Cuts and 4K30 Output Support from Kramer can be configured as a single 4K output or dual HD scaler with full PiP capabilities. It can scale to two independent HDMI outputs, each with a parallel HDBaseT output. The VP-778 includes both analog and embedded audio inputs and outputs, and audio DSP features. It also offers two microphone inputs and digital & analog balanced stereo line-level outputs, and amplified speaker outputs. Control the unit via the front panel buttons, dedicated web page, IR commands, or RS-485 or RS-232 serial commands transmitted by a touch-screen system, computer, or other serial controller.

Dual Independent Scalers HDBaseT Inputs and Outputs 3840 x 2160 Max Single-Output Resolution PiP Cabability 2 x Mic Inputs & Stereo Speaker Output 4 x HDMI, 2 x HDBaseT & 2 x DVI-U Inputs Audio Breakaway Luma & Chroma Keying Two Programmable User Buttons Control via IR, RS-232, Web Browser, OSD

Parameters
Inputs	4 x HDMI (deep color) 8 x DVI-U (deep color), DVI, HDMI, PC, YPbPr, CV 2 x HDBaseT, RJ45 4 x HDMI, 2 x DVI-U & 2 x HDBaseT audio on 3.5 mm mini jacks 2 x balanced mics on 6 mm jacks (with selectable 48 V phantom power)
Outputs	2 x HDMI (deep color) 2 x HDBaseT, RJ45 1 x S/PDIF digital audio, RCA 1 x balanced stereo audio, 5-pin terminal block 1 stereo speaker output, 2 x 10 W, 4-pin terminal block
Compliance With HDMI Standard	Supports HDMI and HDCP
Composite Video	NTSC and PAL
YPbPr Input Resolutions	NTSC: 720p at 50 Hz 1080p at 30 Hz 1080p at 50 Hz PAL: 720p at 60 Hz 1080p 23.976 Hz 1080p at 60 Hz 525p at 60 Hz 1080i at 50 Hz 1080p at 24 Hz 1080i at 100 Hz 625p at 50 Hz 1080i at 60 Hz 1080p at 25 Hz
RGBHV Input Resolutions	640 x 480 at 60 Hz 800 x 600 at 75 Hz 625p at 50 Hz 1280 x 1024 at 60 Hz 1400 x 1050 at 75 Hz 640 x 480 at 72 Hz 800 x 600 at 85 Hz 525p at 60 Hz 1280 x 1024 at 75 Hz 1600 x 900 at 60 Hz 640 x 480 at 75 Hz 1024 x 768 at 60 Hz 720p at 50 Hz 1280 x 1024 at 85 Hz 1600 x 1200 at 60 Hz 640 x 480 at 85 Hz 1024 x 768 at 70 Hz 720p at 60 Hz 1360 x 768 at 60 Hz 1680 x 1050 at 60 Hz 800 x 600 at 56 Hz 1024 x 768 at 75 Hz 1280 x 800 at 60 Hz 1366 x 768 at 60 Hz 1920 x 1200 at 60 RB 800 x 600 at 60 Hz 1024 x 768 at 85 Hz 1280 x 960 at 85 Hz 1440 x 900 at 60 Hz 1080p at 50 Hz 800 x 600 at 72 Hz 1152 x 864 at 75 Hz 1280 x 768 at 60 Hz 1400 x 1050 at 60 Hz 1080p at 60 Hz
HDMI Input Resolutions	NTSC: 1080i at 60 Hz 640 x 480 at 72 Hz 1024 x 768 at 70 Hz 1360 x 768 at 60 Hz PAL: 1080p 23.976 Hz 640 x 480 at 75 Hz 1024 x 768 at 75 Hz 1366 x 768 at 60 Hz 525p at 60 Hz 1080p at 24 Hz 640 x 480 at 85 Hz 1024 x 768 at 85 Hz 1440 x 900 at 60 Hz 625p at 50 Hz 1080p at 25 Hz 800 x 600 at 56 Hz 1152 x 864 at 75 Hz 1400 x 1050 at 60 Hz 720p at 24 Hz 1080p at 30 Hz 800 x 600 at 60 Hz 1280 x 800 at 60 Hz 1400 x 1050 at 75 Hz 720p at 25 Hz 1080p at 50 Hz 800 x 600 at 72 Hz 1280 x 960 at 85 Hz 1600 x 900 at 60 Hz 720p at 30 Hz 1080p at 60 Hz 800 x 600 at 75 Hz 1280 x 768 at 60 Hz 1600 x 1200 at 60 Hz 720p at 50 Hz 2K at 50 Hz 800 x 600 at 85 Hz 1280 x 1024 at 60 Hz 1680 x 1050 at 60 Hz 720p at 60 Hz 2K at 60 Hz 848 x 480 at 60 Hz 1280 x 1024 at 75 Hz 1920 x 1200 at 60 RB 1080i at 50 Hz 640 x 480 at 60 Hz 1024 x 768 at 60 Hz 1280 x 1024 at 85 Hz
HDMI Output Resolutions	640 x 480 at 60, 75 Hz 800 x 600 at 50, 60, 75 Hz 1024 x 768 at 50, 60, 75 Hz 1280 x 768 at 50, 60 Hz 1280 x 800 at 60 Hz 1280 x 1024 at 50, 60, 75 Hz 1360 x 768 at 60 Hz 1366 x 768 at 50, 60 Hz 1400 x 1050 at 50, 60 Hz 1600 x 900 at 60 Hz 1600 x 1200 at 50, 60 Hz 1680 x 1050 at 60 Hz 1920 x 1200 at 60 Hz 480i at 60 Hz 480p at 60 Hz 576i at 50 Hz 576p at 50 Hz 720p at 50 Hz 720p at 59.9 4 Hz 720p at 60 Hz 1080p at 23.976 Hz 1080p at 24 Hz 1080p at 25 Hz 1080p at 29.97 Hz 1080p at 30 Hz 1080p at 50 Hz 1080p at 59.94 Hz 1080p at 60 Hz 2048 x 1080 at 60 Hz 2048 x 1080 at 50 Hz 4K2K at 30 Hz
Control	Front panel buttons, OSD, IR remote control, web pages, 2 x RS-232 on terminal block connector, Ethernet, and cond/dyn selector switch
Operating Temperature	32 to 104°F / 0 to +40°C
Storage Temperature	-40 to 158°F / -40 to +70°C
Humidity	10 to 90%, RHL non-condensing
Power Consumption	100 to 240 VAC, 50 VA max.
Rack Height	1 RU
Dimensions	19.00 x 9.34 x 1.75" / 43.6 x 23.72 x 4.36 cm
Weight	5.7 lb / 2.6 kg approx.

Pix Perfect scaling

K-IIT XL picture-in-picture image insertion technology offering ultra-stable picture-in-picture, picture-and-picture, and split-screen modes

Seamless video switching for swap or follow (transition type) and cut or fade (transition effect)

Dual scalers offer live seamless transitions with two independent outputs

Eight input buttons per channel

Main and PiP window customization in overlay mode

Projection setups: Front, back, ceiling front, and ceiling back

Choice of HDMI, VGA, YUV, or CV on two DVI-U, four HDMI, and two HDBaseT inputs

Two programmable user buttons for passing serial commands

Serial Comms Matrix allows up to eight sets of configurable unidirectional connections for passing serial data from source to destination

HDBaseT technology with data rate of up to 6.75 Gb/s (2.25 Gb/s per graphic channel)

HDBaseT system range of up to 430' in normal mode and up to 590' in ultra-mode (1080p at 60 Hz, 24 bpp) when using BC-UNIKAT cables

Balanced stereo audio inputs, two balanced microphone inputs, digital stereo and balanced stereo outputs, input/output audio level adjustment, and audio DSP

Built-in 2x10 W power amplifier with speaker outputs on a 4-pin terminal block connector

Talkover or mix microphone modes

Automatically scans inputs based on a predefined priority and selects first live input found or last connected

Audio-Follow-Video (AFV) & breakaway

Advanced de-interlacing with 3D comb filtering, film mode, diagonal correction, and motion detection

Multiple aspect ratio choices

Built-in Proc-Amp with enhanced functions such as color correction, gamma, dither, and noise reduction

Power management modes save energy and money

Luma- and chroma-keying

Advanced EDID management of native resolution and color depth modeline per input

Built-in test patterns for screen setup and alignment

Output EDID analysis for optimal scaling

HDMI deep color

On-Screen Display (OSD) provides easy setup and adjustment

Non-volatile memory retains settings

Firmware upgradeable via USB memory stick

Control options include front panel buttons, Ethernet web page, IR, and RS-485 & RS-232 serial commands transmitted by a touch screen system, PC, or other serial controller

Related Questions and Answers

Q: 1. 4K UHD video at up to Will this switcher properly handle 29.97p, HD up to 59.94p, MPEG HD up to 59.94p, and AVCHD 2.0 up to 59.94p?

A: I'm afraid not. The Datavideo SE-1200MU accepts 1080i at 50, 59.94 and 60fps along with 720p at 50, 59.94 and 60fps.

Q: 2. is the Datavideo HDR-1 Standalone H.264 Recorder and Player an option for recording?

A: Yes, you can. I use the HDR-1 to record from the 1200MU. There are 2 HDMI outputs, one for Multi-View and one is assignable. You assign the second HDMI out to be Program and record both audio and video from there.

Q: 3. Does it comes with battery?

A: A Sony NP-F style battery is not included in the box with this product. Here is a link to a great option to purchase along with it.. https://bhpho.to/3dqPWeY

Q: 4. i m intrested to purchase se3200pls tell when i will get this product ?

A: Special Order:Expected availability: 2-4 weeks plus actual shipping time from B&H to you.

Q: 5. Hi. Does it do live titling too?

A: Luis:There are two ways you can bring in live graphics (lower-thirds). 1. Since SE-1200 does have chroma key and luma key, you can bring in a video source from you laptop and key in a graphic using a program such as PowerPoint or Word. 2. SE-1200 also has a DSK (or down stream keyer). Datavideo offers the TC-200 (I think around $700 on B&H site), which includes software for your PC laptop. This will allow you to bring in the video using on the downstream of your production. Upstream is also possible. Both solutions would require a laptop, but both are easy to set-up. Datavideo does have videos which will show you how to use the TC-200 at a href= http://www.datavideo.com target= _blank www.datavideo.com/aCraig

Q: 6. Is there a control surface that will work with the RS422 port on this?

A: The SE-1200MU is designed to be fully controlled from any Windows Laptop/PC and Android tablet, iPad or Mac with the included SE-1200 software control panel. Datavideo does not make a control surface for it, the RS422 port is for integration with Crestron Control Panels.

Q: 7. its work with pal ntsc both ?

A: Hello,Yes, it supports 1080i or 720p at 50, 59.94, or 60 Hz. You just need to set it in the menu.Thanks!

Q: 8. Can this device output a program out 1080p over SDI? Can it output a 1080p pogram out over HDMI? Can the SDI outs be used for multiview and preview?

A: The Data Video SE-1200 MU supports these HD video signals: "1080i/50, 1080i/59.94, 1080i/60 and 720p/50, 720p/59.94, 720p/60" which can be output via HDMI or SDI. HDMI 1 and The SDI outputs can be configured for either program out, preview and multi view. HDMI 2 will always be a multiview.

Q: 9. What cables/connectors does this monitor ship with?

A: This monitor will come with a mini hdmi to full size hdmi cable, as well as a tilt arm.

Q: 10. Can I use a consumer camera with BNC out, like the BNC on datavideo SE-500

A: Hello,No, BNC connector on the SE-500 is for a Composite signal input. Our SE-1200MU switcher is a HD switcher that accepts HD-SDI or HDMI signals. It is compatible with Composite output from a consumer camera. Thanks!

There are no reviews for this product.