Trijicon designed this HD XR Front Sight for Beretta APX Pistols to allow shooters a larger field of view that enhances their ability to identify targets, expedite engagements, and see hits at longer distances. The sight offers a battery-free glow-in-the-dark aiming reference that features a green tritium phosphor lamp inside a photoluminescent yellow outline disk. For durability, the tritium lamp is encapsulated in an aluminum cylinder with a silicone rubber cushion and closed off with a sapphire window. The window acts as a beam-shaping lens and protects the lamp from common gun-cleaning agents.

Battery-Free Aiming Reference    Green Tritium Lamp Dot    Yellow Photoluminescent Disk    Protective Aluminum Cylinder    Silicone Cushion    Sapphire Window

• Beretta APX pistols
  • Battery-free operation
  • Green tritium phosphor lamp
  • Yellow photoluminescent outline disk
  • Aluminum cylinder and a silicone cushion protect the lamp from recoil
  • Sapphire window distributes light evenly and protects from cleaning agents

    Related Questions and Answers

    Q: 1. I own a Panasonic UX-90 camera and this Glidcam popped up in the accessories. I am a newbie when it comes to owning a stabilizer/gimbal. Is this a good place to start or would recommend another model? Thanks for you time!

    A: The Glidecam XR-PRO Handheld Camera Stabilizer would be a good stabilizer for your camera. It is fully manual so a lot of the effectiveness of the stabilizer will come with practice but it should work pretty well.

    Q: 2. If I am standing 20' from camera will I see red glow from the flash! You guys are trying to dodge the point?

    A: You will see a red glow. Animals cannot see red.

    Q: 3. What is the resolution of a timelapse image? Are they the same as the photo quality?

    A: Video resolution for the Browning BTC-5HD-APX-20C Strike Force Apex HD Trail Camera is 1600 X 900p

    Q: 4. Will this work on a BMP4KCC?

    A: It should work great with the BM. I use mine with a d-810, Sony EX, and a tiny cannon camera as well. It's very versatile.

    Q: 5. Are you suppose to have image stabilization in the camera turned on when using the Glidecam?

    A: There is no right or wrong answer here. However, if you notice any unwanted shaking, then it may be advantages to turn on the camera's stabilization. Depending on the camera's method of stabilization, it may crop the sensor slightly. That is something to consider before deciding.

    Q: 6. What's the difference between this and the Devin Graham Glidecam?

    A: The devin graham has more features and can do inverted mode with no problem they say

    Q: 7. Does this work with very light mirrorless cameras like the Sony a7riii with standard zoom lens?

    A: Yes it will as this stabilizer has a load capacity between 0 to 10 pounds.

    Q: 8. Can some tell me the difference between the xr-pro and the hd2000? Using a canon 80d 18-135mm .. thanks

    A: The principal difference between the two is the payload capacity. The XR-PRO can carry 10 lbs and the HD2000 can do 2-6 lbs. Your Canon 80D with a 18-135mm lens is well within the capability of the HD2000.

    Q: 9. What is the difference between the Glidecam XR-Pro and the Glidecam HD-Pro?

    A: The biggest difference is that the XR had four individual screws (two for horizontal and two for vertical movement) that are used to adjust the head but the HD has a gear system that makes balance 100x easier

    Q: 10. What is the total weigh of this? I am concerned it will be too heavy with a Nikon D800. Thanks!

    A: The Glidecam XR-PRO Handheld Camera Stabilizer is large so it can fly large cameras of up to 10 lbs. Consequently it is large and heavy itself at 8.8lbs. So if you were to mount a Nikon D800 plus a heavy lens like the 24-70 f/2.8 (which together weighs approximately 4lbs/1.8kg) you wind up with a rig that weighs somewhere between 8 to 12 lbs. You may not like that much weight. Be that as it may, the reality is this Glidecam is actually too big for what you want to do. I would suggest the much smaller Glidecam HD2000 Stabilizer System With 577 QR Plate Kit B&H # GLHD2000K (B&H Kit). This stabilizer plus the Nikon 800 and lens would be about 6.5lbs, a much more do-able weight to carry for long takes. Now do understand that these kind of stabilizers rely on you and your operating skills as much as the stabilizer itself to create smooth moves. It does take time to learn how to balance and more time to learn how to effectively fly the rig. (Do not pull this out of it's box on the morning of your first job with it.) I will guarantee you, if you do take the time to acquire the skill, what you get is a very organic, fluid motion that cannot be achieved by other means.