Meopta engineered the 1.7-10x42 MeoStar R2 Riflescope as a precision hunting optic, aimed at dramatically improving your performance in low light. Its optical system features elements that are not only ground and polished with high precision to deliver superior performance and high edge-to-edge clarity, but also treated with layers of optical coatings like MeoLux for high transmission and low glare, MedShield for anti-scratch performance, and MeoDrop for hydrophobic and oleophobic action. The second focal plane of the optical system contains a RD BDC 2 illuminated reticle to provide you with an accurate aiming reference. To compensate for ballistics and winds, the turret system offers 88 MOA of horizontal and vertical adjustment ranges and 1/4 MOA (0.7 cm at 100 m) impact point correction.

To match the precision and quality of the optical system, the housing is manufactured from a strong and durable aluminum alloy and treated externally with Meopta's ELOX scratch- and abrasion-resistant anodized finish. It features a single-piece 30mm maintube that is filled with nitrogen and sealed for fogproof and waterproof performance. Additional highlights of the construction are a MeoQuick fast-focus eyepiece for instant zooming, MeoTrack II posi-click windage and elevation turrets with audible reassurance for precise corrections, and a robust erector system for providing a maximum holding force and enduring heavy recoils.

RD BDC 2 Reticle, 2nd FP    30mm One-Piece Maintube    88 MOA Windage/Elevation, 1/4 MOA IPC    MeoTrak II Windage/Elevation Turrets    Aluminum Body/ELOX Anti-Scratch Finish    MeoLux Full Multi-Coatings    MeoShield Anti-Scratch Coatings    MeoDrop Water-Repelling Coatings    MeoQuick Fast-Focus Eyepiece    Water and Fogproof

• 1.7-10x magnification
• 42mm objective diameter
• Proprietary lens grinding and polishing techniques result in superior performance
• MeoLux full multi-coatings ensure high transmission and low glare
• MeoShield exterior coatings protect from scratches and abrasions
• MeoDrop is a proprietary hydrophobic coating that repels water, grease, and skin oil

• 1/4 MOA impact point correction
• 88 MOA windage and elevation
• Diopter adjustment

• Aluminum alloy
• 30mm one-piece maintube
• ELOX scratch- and abrasion-resistant anodized finish
• MeoTrack II posi-click finger adjustable turrets with audible clicks offer precision and repeatability
• Erector system designed to provide maximum holding force and withstand heavy recoil
• MeoQuick fast-focus eyepiece quickly brings your targets into sharp focus
• Nitrogen-filled fogproof
• Waterproof

• 2nd focal plane
• Four non-tapered posts
• Thin crosshair
• Brilliant red target dot
• Short horizontal wind and ballistic compensation lines and dots

  Related Questions and Answers

  Q: 1. I like that this camera easily slides into and out of my pocket when traveling, will the grip make this more difficult? Presumably it is made of a rubberized material. Or is it?

  A: The Sony AG-R2 Attachment Grip is manufactured from rubberized elastomer and polycarbonate plastic. It will depend on the size and shape of your pocket if the Sony AG-R2 Attachment Grip will be able to slide easily into your pocket. However, if there is enough room in your pocket, the camera should still be easily accessible.

  Q: 2. Once the Sony AG-R2 grip is attached to RX100M3 camera, is it permanent or can the grip be removed without causing damage to the camera?

  A: yes it can be removed and reused later without damaging the camera. no issues have done 2 times.

  Q: 3. Can you attach the grip to the LCJRXFB Sony case? Will it interfere with the cover?

  A: Yes, you can attach the grip to the case and it does not interfere with the cover. It's how I have my camera setup and works great.

  Q: 4. will a Godox AD200 with the speedlight head fit in this case?

  A: Yes the AD200 will fit in the Tamrac case. But since a case come with the AD200, you probably will not need to buy the Tamrac.

  Q: 5. Just how thick is the added bump?

  A: Sony AG-R2 Attachment Grip is 8mm thick.

  Q: 6. Will this fit the RX100 V?

  A: Yes, the AG-R2 camera grip will fit the RX100 V.

  Q: 7. Where are these binoculars made? Are the ocular lens covers rain guards or individual caps?

  A: These are made in Czech Republic, and they come with Ocular Caps that tether through the Strap. So they are not two separate Ocular Covers.

  Q: 8. What is the diameter of this eyepiece facing the user's eye?

  A: This is the only specification that Meopta list https://www.meoptasportsoptics.com/en/produkt/meostar-s2-eyepiece-20-70x-11115/

  Q: 9. is this compatible with the Zeiss CP2 lenses?

  A: This is compatible with all CP.2 lenses with the exception of the CP.2 50 mm/T2.1 Macro which has a front diameter of 134mm.

  Q: 10. What makes this mode 2 - 3 times more expensive than the same 8x56 models with HD glass?

  A: Meopta 8x56 MeoStar B1 Plus Binoculars have the follow features whihc are not found in the lower cost models: Space-Saving Schmidt-Pechan Roof Prisms, MeoShield Exterior Coatings, and a 22mm eye relief.