Featuring a distinguishing brown cap, the Cable Techniques CT-LPS-TA3-S is a female 3-pin mini XLR connector with a black shell and gold contacts. It has been constructed with an adjustable cable-exit, allowing you to use the connector in a variety of applications without straining cable.

The CT-LPS-TA3-S accepts cables with diameters up to around 3.0mm. You can adjust the cable outlet of the unit from 60 to 120° and from 240 to 300°. The connector works with compatible Cable Techniques cables, as well as Mogami models such as W2901, W3031 and W2697.

Low-Profile Mini XLR Connector    Adjustable Side Cable-Exit    Left or Right Outlet    60° Adjustment Range    Set-Screw Lock for Color Cap    Compatible with Slim Cables    Black Shell    Gold Contacts

Related Questions and Answers

Q: 1. I'm looking for a tripod to use for VR use with an Kandao Obsidian. How high can this center column extend without making a large footprint- or do you have a different model that would be more appropriate for VR use?

A: When fully extended this tripod is about 54" tall. Preferably for VR shooting you want the camera to be about eye level so it is capturing the right perspective. So if you want the vantage point (eye level view) to be from roughly 54", this would be perfect, if not I would look for a taller tripod.

Q: 2. What is the total height of this tripod with one leg section not extended?

A: With the top two extensions extended, the height of the CT-3472 M2 is just under 43 inches.

Q: 3. Is this the Mark 2 version of the 3472 (with the improved angle locking system)?

A: We only sell the new Mark 2 version any more, at this point, Matt, all the current B&H stock are Mark2 - you can tell be the SKU# - -and also by looking at it because the Mark 2 tripods have bubble levels integrated in the main frame; the older version had none.

Q: 4. Oops - please make that will this tripod work with the RRS BH-55 ball head?

A: Yes it will, Frank - I am not sure if the legs will fold over the head, though (because of the position of the BH-55's knobs.

Q: 5. Can the Feisol tripod legs be set in intermediate positions and have the same strength as when they are fully extended? Thanks

A: Yes.

Q: 6. Is the Really Right Stuff Ball Head BH-50 compatible with this CT-3472M2 tripod ?(Specifically, looking to see if the legs will still reverse fold compactly with the RRS BH-50 mounted, thus making it easy to pack in a suitcase.) Thank you!

A: The Really Right Stuff BH-30 Ball Head, will fit on the CT-3472M2 tripod. The BH-30 ball head will not allow for reverse fold, as tightly as a smaller head would allow.

Q: 7. Can the top plate be purchased separately?

A: Yes, you have to purchase the ball-heads separately in FEISOL Elite Tripod CT-3472 M2 Rapid BH #FECT3472M2 as it's the tripod leg. Here are compatible ball-heads: https://bhpho.to/3sStbZL

Q: 8. What is the maximum height, without extending the center column?

A: Hi Brett, the maximum un-extended height of the CT-3332 is 0.98m / 38.58 in.

Q: 9. I am looking for a cable to connect the Nikon D70 to my Vello Shutterboss unit for taking time lapse sequences. Any suggestions?

A: Unfortunately the Nikon D70 does not accept a wired remote such as the Vello Shutterboss. It only works with an infrared wireless remote as shown in this link. https://www.nikonimgsupport.com/na/NSG_article?articleNo=000026486&configured=1&lang=en_SG

Q: 10. The feisol 3472 is very light-weight compared to other similar tripods. Does that make it more fragile? I need a tripod sturdy enough for a canon 1dx with a 600 mm lens and a gimbal.

A: Carbon is not particularly fragile - more and more airplanes are made of fundamentally the same material ... For supporting the 600 mm lens, we recommend the CT-3372, which is the CT-3472's three leg-section sibling (the 3472 has four leg sections). Having fewer joints on the legs makes the CT-3372 even more stable. In fact, it is rock-solid with no vibrations whatsoever. The same is true for the CT-3472 up to 500 mm lenses.