This Cable Technologies CT-LPS33-12K is a low-profile TA3F to TA3F cable designed to connect certain Lectrosonics SR receivers into Sound Devices mixer/recorders like the 633, 688, 788T, and more. Colored black for easy distinguishing, the cable uses the same LoPro XLR connectors with mini set-screws that keep the color cap in place.

You can set the orientation of the outlet to the left or right of the release pin, which allows for multiple placement possibilities. You can also achieve an angle-adjustment range of between 60 and 120° or 240 to 300°. These features reduce the visible profile of interconnect panels, resulting in a less cluttered look.

The cable diameter is relatively slim at 2.7mm, though its flexible polyurethane jacket is crush resistant, tear-resistant, and resistant to cold weather. This cable measures 12" in length.

For Lectrosonics Receivers    For Sound Devices Mixers/Recorders    12" Length    Color-Coded for Easy Identification    Adjustable Outlets    Angle-Adjustable    Flexible & Strong Polyurethane Jacket    2.7" OD Cable Jacket

Lectrosonics SR Receivers with SREXT mounting kits or SRBATTSLED battery sleds
Sound Devices 633, 688, 664 (CL-6), 788T, and other compatible gear

Related Questions and Answers

Q: 1. Does the cable es compatible with the PXW X70?

A: That cable is not compatible with the PXW X70 since the camera does not have the Sony Multi-terminal. You can use the HDMI or SDI outputs with an HDMI or BNC (SDI) cable to output the video to a monitor or external recorder.

Q: 2. How long is each section of the cable?

A: The total length of the Cuebi External Trigger Cable is 80cm (~31”), with each section from the middle part being 40cm (~15").

Q: 3. Does this modem work on Telstra or Optus in Australia?

A: The SB6190 SURFboard Cable Modem is a standard DOCSIS 3.0 device. You would need to contact your local ISP to verify if they support this standard.

Q: 4. Would this fit on a Ursa 4.6k?

A: Yes, the Wooden Camera D-Box Plus for Blackmagic URSA Mini Pro 12K (V-Mount) will work with other URSA Mini Pro camera models.

Q: 5. If combined with the VariZoom VZ-AV/LANC LANC Converter, will adapter cable allow me to use the VariZoom VZRL100 Zoom/Record Rocker Controller or any other Lanc remote with the new generation Sony's that have the Multi Terminal, like the Sony HDR-CX330?

A: Sorry for the delay in answering. While I can't say for sure about every combination of cables and devices, Sony's adapter cables for the Multi Terminal are intended to allow use of LANC devices and this is why I purchased one of these..

Q: 6. Will the D-Box Link cable reach properly if the camera has the SSD recorder attached?

A: Unfortunately it wont fit properly if you attach the Blackmagic Design URSA Mini Recorder.

Q: 7. will this work on a Sony CCD-FX630?

A: Unfortunately no. This A/V cable will only work for newer Sony camcorders with multi terminal connections.

Q: 8. Will this adapter allow the Sony RM-AV2 Remote to work with the HDR-CX330, which has the Multi Terminal Input?

A: I believe you have a winner. I use this cable with my 2 modern Sony camcorders (FDR-AX100 and CX330) and an old-style Sony tripod with the half-moon connector, and it works perfectly.

Q: 9. Will this cable work with PocketWizard Plus II transceivers and a Sony a7r3III?

A: The S-VPR1-ACC cable is fully compatible with the Plus III and the MultiMAX radios but not officially compatible with the Plus II. It may work if the camera stays awake. You can try setting the camera's sleep timer to longer than the default. We recommend the 13369-S remote camera cable for a Plus II: https://www.bhphotovideo.com/c/product/1481561-REG/pocketwizard_13369_sony_remote_camera_cable_for.html This cable will work with any PocketWizard radio and also has a USB connector which lets you to connect to an external power source to power your remote camera. Power source can be purchased separately.

Q: 10. Will this work for a sony a6000 and a PW Plus X model? Thanks

A: Hi Íosac - The S-VPR1-ACC cable is officially compatible with Plus III and MultiMAX radios (with current firmware). We recommend a different cable for the PlusX - the 13369-S remote camera cable: https://www.bhphotovideo.com/c/product/1481561-REG/pocketwizard_13369_sony_remote_camera_cable_for.html The 13369-Sony cable will work with any PocketWizard radio and has the added benefit of a USB connector which enables you to connect to an external power source to power your remote camera. Power source can be purchased separately.