This beige, ultralow-profile Microphone Madness MM-PSM-s Short Boom Pro Series Omnidirectional Earset Mic delivers clear spoken-word and vocal reproduction for presenters and performers working in music, theatrical, broadcast, house of worship, lecture, and presentation settings. It comes with a TA5F connector that plugs into select Lectrosonics bodypack transmitters.

The MM-PSM-s Short Boom Pro Series earset features a 3mm capsule mounted on a very-short 1.25' boom that provides a tight fit with no movement while discreetly positioned away from the mouth for an unobtrusive fit. The lightweight earset can be worn on either the left or right ear and feels natural when used for extended periods of time. The extremely flexible boom is virtually unbreakable.

The capsule delivers full-frequency (20 Hz to 20 kHz) audio performance and high gain before feedback for detailed speech intelligibility. The 145 dB of dynamic range makes this mic well suited for loud vocal performances in houses of worship and on the musical stage. The mic's omnidirectional polar pattern offers enhanced plosive protection with no proximity effect for a natural sound.

All MM-PSM-s Short Boom Pro Series microphones are made in the USA.

For Stage, Broadcast, Public Speaking    Omnidirectional Pickup Pattern    1.25" Boom/Low-Profile/Single-Ear Design    TA5F Connector    Made in the USA

• TA5F connector for compatibility with the following Lectrosonics wireless transmitters: LMa, LMb, LT, SM, SMa, SMB, SMDa, SMDb, SMQ, SMQa, SMQv, SMV, UM400a, and UM450

Related Questions and Answers

Q: 1. Is this compatible with a Canon xa11?

A: Should work fine. It requires phantom power, which that camera will provide. Uses standard three pin XLR, which that camera has in the grip attachment.

Q: 2. Is this good for a boom pole

A: Hi Joshua, It can be used with a boom pole. -Jen

Q: 3. How does sound quality compare to Senneiser MKH 416? Don't want to mismatch audio too badly with multiple input sources.

A: The Sony ECM-VG1 offers very good quality but the Sennheiser MKH-416 is more preferred for commercial applications.

Q: 4. Does the mic fit on the Sony NX100 attachment without an adapter?

A: The Sony ECM-VG1 will fit into the microphone clamp of the NX-100 using the included microphone spacer.

Q: 5. Would I need to purchase a short XLR cable if I plan on using this with the Sony XLR Handle?

A: The Sony ECM-VG1 Short Shotgun Microphone (BH # SOECMVG1) includes a 19.7" XLR cable.

Q: 6. Will this mic work with Panasonic AG-AC30 and, if so, is there any kind of extra piece necessary to attach it to the camera?

A: Yes, it will work. Use the camera's mic holder to mount it and the included XLR cable to connect it to one of the XLR ports on the camera and be sure to set the input mic settings as needed.

Q: 7. will this work (fit) on Sony PXW-Z150 4K XDCAM Camcorder?

A: Yes, The ECM-VG1 will work with any camera that has an XLR input and can provide phantom power, including the Sony PXW-Z150 4K XDCAM

Q: 8. is it the male or female end xlr?

A: The microphone's body offers a 3-pin male XLR connection. This agrees withe universal convention for microphones.

Q: 9. How does the sound quality compare to the diety d3 pro?

A: Both mics will provide high quality sound and they differ a bit in their features. The ECM-VG1 is designed to deliver a smooth and natural sound with a flat and wide frequency response range of 40 Hz to 20 kHz, low noise level of 18 dB and a high sensitivity of -33 dBV. It also has a two-position low-cut switch to reduce ambient reduce and can handle loud sounds up to 127 dB SPL. The D3 Pro is designed to deliver a clean and clear sound with low noise. It has a frequency response range of 50 Hz to 20 kHz, a low noise level and high sensitivity of -24 dBV. It also has a two-position low-cut switch and can handle loud sounds up to 130 dB SPL. Additionally, the D3 Pro has a gain knob that provides up to 20 dB which gives you better control of the mic's level. Other things to consider between the two mics are the powering options. The ECM-VG1 operates with phantom power only while the D3 Pro has a built-in rechargeable battery and the automatic on/off feature requires plug-in power from the camera or recorder. All of these factors are important to be aware of depending on the camera or recorder you will be using and its capabilities for input and powering.

Q: 10. What is the diameter of this microphone so I can buy a k-tek mic holder?

A: The Sony ECM-VG1 Short Shotgun Microphone has a diameter of 0.79" (20 mm) and it measures 8.27" (210 mm) long.