Made exclusively for the ELB 500 TTL battery-powered pack, the ELB 500 TTL Flash Head from Elinchrom has a compact form factor of 3.5 x 3.1 x 6.3" and weighs just 1.5 lb making it ideal for hand-holding or mounting overhead on supports such as a boom. Its Quadra front accessory mount (Q-Mount) is compatible with Portalite softboxes, and can also use full-sized Elinchrom or Profoto softboxes with an optional adapter. The flash head is capable of achieving flash durations as short as 1/3400 sec. in Normal Mode and 1/20,000 sec in Action Mode for special effects. It has a 14W LED modeling light that draws minimal power from the pack's battery, a 5/8" receiver for stand mounting, and comes with an 8' cable for connection to the ELB 500 TTL.

Weighs 1.5 lb    Measures 3.5 x 3.1 x 6.3"    LED Modeling Light    Modeling Light: 5200K, CRI: 90    5/8" Stand Adapter    7mm Umbrella Fitting, 8' Head Cable    Quadra Front Accessory Mount

Related Questions and Answers

Q: 1. Can I use the HSS feature when using Phottix Odin II Transmitter?

A: Yes

Q: 2. Can the ELB 500 plug into the ELB 400 pack? Is the ELB 500 compatible with the D850? I have heard may lights don't work with the D850

A: YOU WILL HAVE TO BUY ELINCHROM NIKON HS REMOTE TO GET FULL TTL CAPABILITY, ELB 500 HEADS ARE DIFFERENT FROM THE ELB 400. I'M NOT SURE THEY ARE FULLY COMPATIBLE.

Q: 3. Don't see it it the specs. Can the ELB 500 TTL work with high speed sync?

A: Yes, the ELB500 has HSS.

Q: 4. I've heard that the two oghts have to be set to the same power output. is that true? Can one of the lights be at 500 ws and the other dialed down to 200ws?

A: The light has full asymmetry, so you can adjust either side to what ever power you would like.

Q: 5. I have a chimera XXS soft box how do I attach it to this 500 Quadra head ?

A: The following speed ring is needed in order to mount the following system. Impact Speed Ring for Elinchrom EL and Impact EX BH #IMSRELI • MFR #SR-ELI https://www.bhphotovideo.com/c/product/884604-REG/impact_sr_eli_speed_ring_for_elinchrom_impact.html

Q: 6. Can the trigger be used with a Pentax 645Z?

A: As of now (August, 2019) Elinchrom does have a trigger that can be used with Pentax. https://www.bhphotovideo.com/c/product/1466689-REG/elinchrom_el19336_el_skyport_transmitter_pro_for.html

Q: 7. Does this require an additional speed ring to use 53" rotalux octa?

A: If your Rotalux has the standard Elinchrom ring you will need the adapter. https://bhpho.to/2WmB1Mx

Q: 8. Do the flash heads come with the Q-Protective caps or is it only the reflectors with an open front on them ?

A: The flash heads do come with Protective Cap

Q: 9. Can I control lights A and B as different groups with Skyport Transmitter Pro?

A: You can control the two lights at different power levels.

Q: 10. Does this require an additional speed ring to use 53" rotalux octa?

A: Not a speed ring but a reflector adapter. Click the link below to view; https://www.bhphotovideo.com/c/product/1148690-REG/elinchrom_el26342_quadra_reflector_adapter_mk_ii.html/pageID/accessory