The Z Cam K1 Pro Cinematic VR180 Camera captures 180° video with two fisheye lenses to dual SDXC cards. In addition to the two IZugar MKX22 f/2.5 fisheye lenses, the camera supports an external stereo microphone and records audio using the AAC format. The captured footage can be used for stereoscopic 3D effects or stitched to create an image compatible with the VR180 format.

The camera features a built-in Ethernet port that supports PoE (Power over Ethernet) and has built-in Wi-Fi. WonderLive software (Windows) is downloadable, and it allows you to livestream your footage. The Z CAM Controller software (Windows or Mac) allows you to control the K1 Pro from your computer via the camera's Ethernet connector.

2 x IZugar MKX22 Fisheye Lenses: f/2.5    Stereo Microphone    Supports VR180 Format    Supports Stereoscopic 3D    Built-In Wi-Fi and Ethernet Port    Supports Power over Ethernet (PoE)    Records to Individual SDXC Cards    Captures in MOV (H.264 Codec)    Control and Stitching Software

VR180 cameras capture photos and video in 3D but can be viewed and shared in either 2D or 3D.

A VR headset is required to experience your images in VR.

Your footage can be imported into an edit system that supports stereoscopic video.

The camera supports the following:

• Time-lapse
• Photo snap
• Built-in Z CAM sync
• AAC audio encoding
• Auto, manual, and coordinated exposure
• Auto, manual, and coordinated white balance
• Z-Log gamma setting
• External microphone via built-in 3.5mm jack
• 802.11 Wi-Fi antenna port (antenna not included)
• Ethernet port

Related Questions and Answers

Q: 1. The USB-C input of the computer MUST have Alt-Mode capability?

A: This product functions like a normal USB capture device but allows you to capture 2 streams instead of one. when used with a software like Wirecast, OBS, or VMix you will have the option of choosing one or both of the inputs to use. It will work with most USB-C based computers however it may limit the resolution if your computer does not have enough processing power.

Q: 2. How to operate Bushnell trophy camera model 119447?

A: The instructions for the Bushnell Trophy Cam HD Trail Camera can be found at this link: https://bhpho.to/46T2Lt6

Q: 3. How does this differ from the E2C? Would it basically be a "studio" and/or "streamer" version of the E2C? Thanks!

A: The Z CAM E2N 4K NDI Camera has a larger body over the E2C. However, the major difference is the recording formats. The E2C offers 10-bit recording formats, and the E2N is 8-Bit NDI recording, as well as output for streaming.

Q: 4. I might have missed it in the description, but what is the resolution for this camera?

A: The Z CAM K1 Pro Cinematic VR180 Camera will provide the stitching resolution of 4K and 6K.

Q: 5. Can this record 4k60 as well as NDI streaming?

A: The Z CAM E2N 4K NDI Camera can both record 4k60p and produce an NDI signal.

Q: 6. Is this cable capable of shooting Prores Raw with Atomos Ninja V?

A: You should have no trouble shooting raw with this cable.

Q: 7. this is only for e2f6 pro?

A: The Z CAM ZBlade for E2-F6 Pro (1TB) is listed only for use with the E2-F6 Pro Camera.

Q: 8. All the recording specs are stated as internal recording. Can all those same formats also be recorded via USB-C to an external SSD, especially the 120 fps in both H.265 10bit and H.264 8bit?

A: The USB Type-C port can also be used for external SSD recording we presume at the same specs.

Q: 9. I don't see the GenLock (sync) ports on the back, like the E2, can this sync w other E2N's & with other ZCams w/o timecode?

A: The Z CAM camera line has two kinds of mulitcam sync. The Z CAM E2N 4K NDI Camera supports Sync via Z CAM EzLink. PixelLink - Pixel level / line level sync precision, Z CAM E2 or customized version only, requires sync cable and daisy chain connection. EzLink - 0.5ms sync precision, all ZAM E2 series cameras, all cameras connected to a switch (no need to daisy chain). 1) Original E2 camera does not offer genlock. 2) E2-F6 Pro supports genlock. 3) E2 supports PixelLink for multicam sync. 4) All Z CAM E2 series cameras supports EzLink for multicam sync. 5) E2N (new NDI model) supports EzLink.

Q: 10. does this work being plugged into an ipad or ipad pro?

A: Yes, the Z CAM IPMAN Gemini Pro dual HDMI UVC capture dongle will support the iPad Pro with USB-C connectors. Please note the Gemini requires iOS version 17 or above.