The black Cable Techniques CT-RAWCB-234 is a DIY premium raw cable designed for use with LPXLR 5-pin and LPS-TA5 low-profile connectors.

Price is per 3.3'.

Price per 3.3'    For LPXLR 5-Pin and LPS-TA5    2.3mm OD, 4 Conductors, Shielded    PVC Jacket

• 2.3mm cable diameter
• 4 connectors + Lap Shield
• PVC polyvinyl jacket
• Conductor: tin-plated stranded copper conductors
• Stranding: 4 stranded insulated wires

Related Questions and Answers

Q: 1. Hi, Can this be used for Hasselblad 500 camera?

A: These ones specifically will not fit a Hasselblad. You need the connector design A for the camera, this is the design B .I have included a link to the correct ones you need.a href= http://www.bhphotovideo.com/c/product/153014-REG/OP_TECH_USA_1301022_System_Connectors_Set_of.html target= _blank http://www.bhphotovideo.com/c/product/153014-REG/OP_TECH_USA_1301022_System_Connectors_Set_of.html/a

Q: 2. Will these connectors work with the strap stud on a Canon EOS-M ?

A: These are not compatible, however the Op/Tech Super Pro A type connection is. See the following link for a compatible alternative: http://bhpho.to/1vIkxJZ

Q: 3. Will this work with the pluto trigger and a Sony A1 camera?

A: The Vello 2.5mm Remote Shutter Release Cable II for Cameras with Sony Multi-Terminal Connectors will work for a camera with a Sony multi interface port such as the A1 and a trigger with the 2.5mm female port, yes.

Q: 4. Can this work with pocketwizards on a Sony A1?

A: No, the Vello 2.5mm Remote Shutter Release Cable II for Sony Multi-Terminal Cameras does not work with Pocketwizard triggers.

Q: 5. Will this work with a Sony A7iii

A: Yes, the following cable is designed for the Sony multi-terminal cameras and will adapt to the following Sony units. Alpha: a1, a9 II, a9, a7S III, a7S II, a7S, a7R IV, a7R III, a7R II, a7R, a7 IV, a7 III, a7 II, a7, a6600, a6500, a6400, 6300, a6100, a6000, a5100, a5000, a3000, a99 II, a77 II, a68, a58 Cyber-shot: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, DSC-RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, HX50V, HX90V, HX400V, HX400, HX300, and ZV-1

Q: 6. Can it be used with lanc to control a7iv?

A: The Vello 2.5mm Remote Shutter Release Cable II for Sony Multi-Terminal Cameras cannot be used with lanc to control the a7 IV.

Q: 7. Do these work for HASSELBLAD 500C/M CAMERA?

A: Yes, OP/TECH USA Super Pro A Connectors are compatible with the Hasselblad 500C/M series.

Q: 8. Two cables are included. Does one of the cables have a 2.5mm tip and the other end, of the same cable, have a 3.5mm tip?

A: The Vello 2.5mm Remote Shutter Release Cable II for Cameras with Canon Sub-Mini Connectors has two 2.5mm male ends. The Vello 3.5mm Remote Shutter Release Cable II for Cameras with Canon Sub-Mini Connector has one 2.5mm male tip and one 3.5mm male tip.

Q: 9. Hi can this strap fit to Mamiya RZ67?

A: These connectors should fit your camera; they are designed to fit a lug with a square post measuring .162" wide (4,11mm).

Q: 10. would this cable work with Sky-Watcher Star Adventurer 2i to control the Sony a7R4?

A: The Vello 2.5mm Remote Shutter Release Cable II for Cameras with Sony Multi-Terminal Connectors is compatible for connecting the Skywatcher 2i star tracker with the Sony A7R4 camera.