Mount your compatible monitor to the wall with the white Ergotron HX Wall Mount Monitor Arm. It supports displays up to 49" weighing between 20 and 42 lb and allows you to tilt the display from -5 to 70°, pan 360°, and rotate your screen up to 180° to adjust the screen to suit both the content being viewed and the environment. The HX Wall Mount Monitor Arm also comes equipped with Constant Force technology to ensure every adjustment made to the monitor arm is effortless.

Supports Displays up to 49", 20 to 42 lb    Provides up to 11.5" Lift    Provides -5 to 70° Tilt Adjustment    Provides up to 360° Pan Adjustment    Provides up to 180° of Base Rotation    75 x 75 to 200 x 200mm VESA Support

Offers ergonomic monitor positioning using Constant Force Technology.

Avoid hitting cubicle walls with a rotation stop on the base.

Place your monitor where you like for the best view and open up valuable work area.

Cables stay hidden under the arm and through the extension.

BIFMA level 2 certified for a low environmental and social impact. The mount is also built for thousands of movements by passing 10,000-cycle test.

• ETL Environmental VOC+ certified
• OSHPD preapproved with wall track installation
• Arm folds back over the base into a compact retracted position for tucking under your system's furniture storage shelves or cabinets in space-constrained areas
• Portrait/landscape rotation with lockout
• Streamlined cable management routes cables under the arm and within the extension
• Monitor can be rotated 360° at the connection point of the arm and extension; rotation is restricted to 180° at the connection point of the extension and base
• Attaches directly to sturdy vertical surfaces, wood studs, or (with an optional bracket) wall tracks
• Works with the ultra-wide, curved Samsung 49" Odyssey G9 monitor with the optional Heavy-Duty Tilt Pivot

Related Questions and Answers

Q: 1. Can this bracket be used with other 700 series SmallHD monitors? Namely a 702

A: You can use this with the SmallHD 702. This arm offers a 1/4"-20 screw for mounting and the SmallHD 702 offers a 1/4"-20 thread on the sides of the monitor.

Q: 2. Can this monitor work with Sony Cinealta cameras and show all control info?

A: Whatever camera is used with the PORTKEYS LH7H 7" High-Bright Touchscreen Monitor, when not set to a clean HDMI output, will show all settings.

Q: 3. Is it also fit for Steadicam G70 arm? Thanks

A: The Proaim Hard Mount Kit for Steadicam–Type Arm has an Arm Socket pin of 16mm or 5/8". If your Stedicam G70 has the same pin size, then it will be perfectly compatible.

Q: 4. Does this arm have a 1/4" screw hole in the base?

A: no this does not have a 1/4-20 female thread on the bottom

Q: 5. Would the vest fit a large man??

A: The Solo Vest has the capability to adjust for a wide range of body sizes from a small child up to a 250 lb person.Click on this link for more information on the Solo Vest and Arm -a href= http://www.tiffen.com/userimages2/Steadicam/dhi-TTC%20Solo%20Arm%20%26%20Vest%20Box%20Label%20v1.9.pdfq target= _blank http://www.tiffen.com/userimages2/Steadicam/dhi-TTC%20Solo%20Arm%20%26%20Vest%20Box%20Label%20v1.9.pdfq/a

Q: 6. If I want to power this monitor with D-Tap, does it come with a cable for the barrel jack or should I use a dummy battery cable?

A: The PORTKEYS LH7H 7" High-Bright Touchscreen Monitor does not included a d-tap power cable in either format (DC or Dummy battery), so if D-tap power is the desired power solution, a cable will need to be purchased separately.

Q: 7. Is there any back pack can fit the system when not using it

A: There was a three bag system available. At this time we suggest this all in one bag. Porta Brace RIG-4SRKOR Wheeled Rig and Camera Case with Interior Kit B&H # PORIG4SRKOR.

Q: 8. Can I mount my DSLR on it? I really wonder about it!

A: The Aero 15 is perfect for a DSLR! That is exactly the size camera this was designed for.

Q: 9. How do I use a camera that has only HDMI with this rig?

A: While the cable on the top that connects to the monitor is SDI, the monitor itself also has an HDMI input as well. You would just need to run a separate HDMI cable from the camera to the monitor in that case.

Q: 10. will this monitor automatically turn on and display the HDMI feed if it's connected to DC power with a on/off switch?

A: When the power switch on the PORTKEYS LH7H 7" High-Bright Touchscreen Monitor (Black) is set to ON and a valid compatible HDMI signal is supplied, the monitor will automatically display the HDMI source when power is supplied via DC.