This Cable Technologies CT-LPS33-24Y is a low-profile LPXLR-3F to TA3F cable designed to connect Lectrosonics UCR-type receivers into Sound Devices mixer/recorders like the 633, 688, 788T, and more. Colored yellow for easy distinguishing, the cable uses low-profile XLR connectors, with an adjustable outlet that lets you set the orientation to the left or right of the release pin. These features allow for multiple placement possibilities, all while reducing the visible profile of interconnect panels. This results in a less cluttered look all around.

The cable diameter is relatively slim at 2.7mm, though its flexible polyurethane jacket is crush resistant, tear-resistant, and resistant to cold weather. This cable measures 24" in length.

For Lectrosonics UCR Receivers    For Sound Devices Mixers/Recorders    24" Length    Color-Coded for Easy Identification    Adjustable Outlets    Angle-Adjustable    Flexible & Strong Polyurethane Jacket    Crush-, Tear- & Cold-Resistant    2.7mm OD Cable Jacket

Lectrosonics UCR type receivers
Sound Devices 633, 688, 664 (CL-6), 788T, and other compatible gear

Related Questions and Answers

Q: 1. does the battery door stay open while you are shooting ?

A: The door on the camera has a rubber plug that you can remove in order to pass the dummy battery cable through to close the door. So yes the door on the camera will be closed when using this dummy battery.

Q: 2. Would this fit in a slot for a NP-F550 battery? (tilta focus grip)

A: Yes, the IndiPRO Tools 98PPC 24" 2.5mm to Sony L-Series Type Dummy Battery Cable will fit in a slot for an NP-F550 battery.

Q: 3. Hey just brought this cord for my A7sii and had it running from my camera to the tilta V mount plate and had a V mount battery on top of the plate. It worked the first few times i played around with it, and came back later in the day to turn my camera on, and it wouldn't turn on, i think its fried the camera. WHAT DO I DO?

A: I am sorry to hear about any issues you are having with this cable. If you have not done so already please email us directly at cs@bhphoto.com so we can look in to the matter further for you.

Q: 4. Can you attach a USC Plug and use a wall outlet to use the battery?

A: Yes, The ZILR USB Type-C to Sony NP-FZ100 Regulated Dummy Battery Cable could be used with USB wall power adapters.

Q: 5. Does this regulate voltage to a safe 7.6V from Vmount batteries of 14.4V?

A: I have been using it for a few weeks now with no issues attached to Nano 14.8V vmount batteries.

Q: 6. Will this work on the GT2 guitar trainer?

A: No, the unit was designed to be used with the RC-30P footswitch.Since the TASCAM RC-30P is no longer manufactured (with no replacement), any momentary closure, NO (normally open) foot-switch using a 1/4 phono plug can be used.Examples: * BOSS FS-5U* M-AUDIO SP-1Thank you for your interest in TASCAM products.

Q: 7. is there a way to run this with a normal quick charge power bank?

A: ive had success with both Xtpower banks off amazon. You will need a 2.5mm to 2.1mm adapter and add some copper in the center connector. The two indipro battery cables i ordered, the inner connector was deeper then the adapters and xtpower banks so it wasnt a solid connection and only worked sometimes. The copper fixed it and made it reliable. Worked great. ran the A7sII through hdmi for a live feed off a 20,000 milamp xtpower battery for 4hours and battery showed 73% left.

Q: 8. Will this work with the Xt-20?

A: This d-tap regulation cable should work with the FUJIFILM X-T20 camera as it uses the same FUJIFILM NP-W126S battery which is the same dummy battery on this cable.

Q: 9. Is it fully decoded so the camera show the battery capacity?

A: Yes, it is full decoded. This cable includes a smart chip in the dummy battery that communicates with the camera to show the battery capacity as well as other information.

Q: 10. Does this work with the Sony A6500

A: Yes it should. The A6500 uses the same battery as the NP-FW50 style battery as the cameras listed, it should work as well.