This Cokin Spare Parts Kit is compatible with a Cokin Z-Pro Series Filter Holder, a Cokin Evo Aluminum P Series Filter Holder, a Cokin Evo Aluminum Z-Pro Series Filter Holder, and a Cokin Evo Aluminum X-Pro Series Filter Holder. It includes one pair of slots, one pair of spacers, four 25mm-long screws, four 30mm-long screws, and four retaining nuts.

The pair of slots can be used to accommodate a square or rectangular filter along the front of each compatible filter holder. Cokin Evo Aluminum Filter Holders can also utilize the slots at the rear of its back plate for attachment to a separately available Cokin filter holder adapter ring, which connects a Cokin filter holder to the front of a lens.

If placed between the back plate of a Cokin Evo Aluminum Filter Holder and a pair of slots along its front, the spacers enable the use of a 4mm-thick, square or rectangular filter. Whether configured with or without spacers, the 25mm-long screws hold a Cokin Evo Aluminum Filter Holder's components together and are each locked in place with a retaining nut.

Similarly, the 30mm-long screws are intended for use with a Cokin Z-Pro Series Filter Holder. However, they can also be installed on a Cokin Evo Aluminum Filter Holder, allowing it to accommodate an additional 2mm-thick filter beyond the maximum number of filter configurations permitted with the 25mm-long screws. If the 25mm-long screws are instead used to substitute the 30mm long screws on a Cokin Z-Pro Series Filter Holder, its capacity will be reduced by one 2mm-thick filter, however the overall profile of the filter holder will be lowered along its front, with the front end of each 25mm-screw prevented from extending beyond its corresponding retaining nut.

For Evo Aluminum P Series Filter Holder    For Evo Aluminum Z-Pro Filter Holder    For Evo Aluminum X-Pro Filter Holder    For Cokin Z-Pro Series Filter Holder    2 x Spare Filter Slots    2 x Spare Spacers for 4mm-Thick Filter    4 x Spare 25mm Screws    4 x Spare 30mm Screws    4 x Spare Retaining Nuts    Use Extra 2mm-Thick Filter in Evo Holder

Related Questions and Answers

Q: 1. will these holders work for the 7200 model

A: Yes, they will. I bought these for that exact purpose and they work beautifully.

Q: 2. Is this made of metal or plastic?

A: The Moment Spare Large Lens Cap BH #MO107003 is made of a durable rubber compound.

Q: 3. Will these feet fit my Benro TMA 37C series3Mach3 Carbon Fiber tripod? I lost one and need a replacement

A: No, these Benro MeFOTO RoadTrip Pro Spare Rubber Feet and Parts Kit are only for the MeFOTO RoadTrip Pro Tripods.

Q: 4. Will these work for the Minolta Dimage 5400 slide scanner?

A: These slide holders will only work with the Plustek OpticFilm 8000 series scanners.

Q: 5. What is the thickness of the carrier? I'd like to use it with a Nikon ES 1 slide copier. Thanks!

A: I have negative and slide holders. The negative holder is 0.28 (7.0mm) thick and the slide holder is 0.29 (7.36mm). The width (just in case you're thinking of width instead) is 2.465 (62.6mm), the same for both.

Q: 6. Is it compatible with Flashpoint PS8006?

A: This product is only compatible with the Plustek 8100 and 8200 Ai.

Q: 7. How are slides held in place? In the photo it appears that there are spring loaded covers, one per slide but I can't really tell.

A: There is a spring loaded slot that retains two opposing edges of each slide. You gently push one edge of the slide into the spring loaded slot from the opposing edge, then push down on the free edge while allowing the spring to push the free edge of the slide under two retaining clips. You remove the slide from the holder by re-compressing the spring from the edge under the retaining clips then pulling that edge away from the mount It is quite easy to do and very secure. It works for cardboard mounts and most plastic mounts. Some mounts with cover glass are too thick to slide into the slot.

Q: 8. Can these be used for DSLR scanning? Do they have a flat side where the negatives and slides would be parallel to the sensor plane?

A: Yes, the bottoms of the holders are flat.

Q: 9. Does this package include 2 holders, like the picture, or only one?

A: The Plustek 2 x 35 mm Negative Holders For 8100 & 8200i Ai does include two holders.

Q: 10. I ordered the two holders and got one for slides and one for film. What do I do now? I thought I was getting two holders for slides.

A: I am sorry about this. For this you would need to contact our customer service team, they can be reached by phone at 800.221.5743 or 212.239.7765. As an alternative, you can send them an e-mail to a href= http://CS@bhphotovideo.com. target= _blank CS@bhphotovideo.com./a