Loudspeaker Management System

Jbl Aw295-ls High-power 2-way 12" Passive All-weather Loudspeaker (gray)

Product Code: ga18427
Availability: In Stock

$14,559.00 $21,401.73

Qty

0 reviews Write a review

Description
Reviews (0)

Great for outdoor applications, the gray JBL AW295-LS is a high power, lightweight, 2-way, full-range loudspeaker system well-suited for outdoor entertainment centers, sport facilities, themed entertainment venues, cruise ships, and water parks.

The AW295-LS has a power rating of 400W (1600W peak), which drives the Differential Drive 12" low-frequency woofer and high-frequency compression driver. The large format Progressive Transition wave-guide provides excellent 90 x 50° coverage and is rotatable, allowing the loudspeaker to be used in either the vertical or horizontal orientation. The enclosure is constructed of multilayer glass composite with a 16 AWG stainless steel grille that's backed with open cell foam and stainless steel mesh, providing excellent protection in the harshest environments. The system can be operated as an 8-ohm device and is equipped with a 400W transformer for 70/100V applications. This loudspeaker is EN 54-24 compliant for life-safety applications.

Weather-Resistant, All Fiberglass EN54-24 Compliant for Life Safety 90 x 50° Coverage Differential Drive Low-Frequency Driver High-Frequency Compression Driver Large Progressive Transition Waveguide 400W, 70/100V Transformer U-Type Mounting Bracket Vertical/Horizontal Orientation

Key Specs
Active/Passive	Passive
Number of Included Speakers	1
Speaker Configuration	2-Way
Power Handling	For 100 Hours: 400 W 1600 W Peak
Constant Voltage / Transformer Taps	70 V: 400 / 200 / 100 W 100 V: 400 / 200 W
Impedance	8 Ohms (Nominal)
HF Driver	1x 1.5" / 38 mm Waveguide-Coupled Compression Driver
LF Driver	1x 12" / 304.8 mm Woofer
Frequency Range	74 Hz to 20 kHz -10 dB
Color	Gray
Speaker
Active/Passive	Passive
Number of Included Speakers	1
Speaker Configuration	2-Way
Power Handling	For 100 Hours: 400 W 1600 W Peak
Constant Voltage / Transformer Taps	70 V: 400 / 200 / 100 W 100 V: 400 / 200 W
Impedance	8 Ohms (Nominal)
Enclosure Type	Bass-Reflex
Drivers
HF Driver	1x 1.5" / 38 mm Waveguide-Coupled Compression Driver
HF Voice Coil	2.95" / 75 mm
LF Driver	1x 12" / 304.8 mm Woofer
LF Voice Coil	Dual 2.95" / 75 mm
Performance
Frequency Range	74 Hz to 20 kHz -10 dB
Frequency Response	106 Hz to 18 kHz ±3 dB
Maximum SPL	131 dB (Peak) 125 dB (Continuous)
Sensitivity	98 dB 85.9 dB SPL
Coverage Angle	90° H x 50° V (Horn)
Directivity	12.6 dB (Directivity/Q Factor) 11 dB (Directivity Index)
Crossover	1.3 kHz
Connectivity
Inputs/Outputs	1x Barrier Strip Input
Maximum Wire Gauge	10 AWG / 2.59 mm
Physical
Certifications	CE
Environmental Resistance	Dust/Water-Resistant (IP55)
Color	Gray
Mounting	2x M10 Bracket Point (Each Side) 2x M6 Fly Point 1x M10 Fly Point (Rear)
Construction Material	Fiberglass, Stainless Steel Grille
Dimensions	28.8 x 17.8 x 16.1" / 732 x 452 x 409 mm
Weight	55.6 lb / 25.2 kg

Weather-resistant, all fiberglass enclosure
EN 54-24 compliant for life safety applications
90 x 50° coverage
2262H Differential Drive low-frequency driver
2432H high frequency compression driver
Large PT progressive transition waveguide for excellent pattern control and low distortion
400W, 70/100V transformer included
U-type mounting bracket included

Related Questions and Answers

Q: 1. Is this for one or a pair?

A: This is a single speaker.

Q: 2. what would be a recommended amp to run four of these speakers?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 will work well with the: Crown Audio DSi 2.0 Series LA4 1200W 4-Channel Amplifier for JBL Cinema Loudspeakers B&H # CRLA4 Key Features: For Professional Cinema Rooms JBL Cinema Speaker Tuning Presets 2200W at 4 Ohms per Channel DriveCore Technology for Reliability Intuitive LCD Screen for Set Up Onboard 96 kHz/32-Bit DSP Crossovers, EQ, Delay, Filters, Limiting RJ45 for HARMAN Audio Architect Software SNMP for Theater Management Systems

Q: 3. I know that the maximum throw is about 44 ft. But, what is the minimum distance? In other words, how close can I sit before integration is compromised? Is 10-12 ft too close?

A: The JBL Two-Way ScreenArray Cinema Loudspeaker (B&H # JBC211) has a minimum usable distance of about 3'. Ideally, listeners should be within a 20° angle of the front of the speaker.

Q: 4. MB200W U shaped mounting bracket fit the SX100 speakers?

A: The MB200W bracket is compatible with the SX100+

Q: 5. I am looking to have these speakers controlled by a lecture amp ?

A: The JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 should have a minimum of 100 watts input at 8 ohms. Check your lectern's amplifier output rating.

Q: 6. How would these be in a 700sq movie viewing room?

A: A pair or two of the JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker BH #JBSCS12 would be thunderous in the small space you have described.

Q: 7. This looks like a monitor option - Are the legs removeable?

A: Yes, the monitor feet shown on the Electro-Voice Sx300E 12" 2-Way 300W Passive Loudspeaker are attachments and can be removed.

Q: 8. Is there a temperature range these can be installed in?

A: This is rated to work between -67 degrees to 120 degrees F. based upon a Mil Spec rating of 810 as listed in the product spec sheet. https://jblpro.com/en/site_elements/jbl-professional-specifications-awc82-spec-sheet

Q: 9. What bracket do we use with the ac 28w speaker?

A: JBL recommends the JBL U Bracket f/Models AC28/XX white finish7. That would be B&H part number B&H # JBMTU28WH.

Q: 10. Does this speaker support upper and lower pole mount options?

A: The Mackie C200 Passive 10" 2-Way Loudspeaker has a single pole mount socket on the bottom of the speaker and also has an asymmetrical trapezoidal cabinet for floor monitor positioning.

There are no reviews for this product.