The Roland System-500 Series - 510 Synth is a 3-in-1 Eurorack synthesizer voice module, well suited for designing an entry level setup or adding the sound of the classic Roland SYSTEM-100m to your rig. With its semi-modular design, the 510 requires minimal patching to generate sounds, but still allows you to override it's internal patching and route signal manually via patch points.

The 510 Synth features a single voltage-controlled oscillator (VCO) with three waveforms (square, triangle, saw), a classic, resonant, low-pass, voltage-controlled filter (VCF), and a built-in voltage-controlled amplifier (VCA) with exponential and linear settings, as well as high- and low-level outputs. The VCO offers a five octave range with a key input and a modulation input with attenuator. The square wave offers a manual PW slider and includes a PW CV input with an attenuator. The VCF includes a key input and a modulation input, both with attenuators. The filter is capable of self-oscillation and can be controlled like an oscillator via the key input. The VCA includes an initial knob for setting the base output of the VCA when using either of the two modulation inputs, which also include attenuators.

The semi-modular patch routing features the square wave output normalled to input 1 of the filter. The filter output is connected to input 1 of the VCA and VCA modulation 1 is connected to the VCF modulation input 2. The Roland 510 Synth includes four rack screws and a ribbon cable to connect to a Eurorack modular power supply (sold separately).

Semi-Modular with VCO, VCF & VCA    Oscillator with Three Waveforms    Pulse, Triangle, and Saw Waveforms    Manual or CV Pulse-Width Mod Controls    Dual-Input Low-Pass Filter with Res    Flexible HPF Switch with 3 Settings    Dual-Input VCA with Lin/Exp Setting    High- & Low-Level Outputs    Modulation Inputs for VCO, VCF & VCA    Includes Mounting Screws & Ribbon Cable

Related Questions and Answers

Q: 1. Can this softbox be used with other panel lights that are close in size? Is the mounting style unique to GVM, or will it work with other brands too? Thanks!

A: This softbox has only been confirmed as compatible with the listed GVM models. Your results may vary when using it with other LED panels.

Q: 2. Can I use this bracket to mount 1 microphone and 1 camcorder on a tripod such that the camcorder points straight ahead and the microphone points 40 degree away from the direction of the camcorder ?

A: Hi - in any case you would need a microphone shock mount to attach the mic to the bracket. Typically these mounts tilt but do not pan which is what you want. Unless you can find one that pans, you would have to adapt it yourself somehow.

Q: 3. Will these work with the GVM 50RS panels?

A: It will not. The sizing is too small.

Q: 4. What is the mounting hardware for? Looks like the pins go in the corner and the brackets replace barn doors. Doesn't fit if you do that. Anyone know?

A: This GVM softbox would slide over the front of the GVM panel then secure with velcro straps on the back.

Q: 5. Will this work with Speedlite 580 EX?

A: It is compatible with the Canon 580 ex flash. Note the wireless system is not TTL. So the flash will only work in Manual.

Q: 6. Will this work with canon 600 EX-2 RT speed light? I have a Hahnel viper transmitter and Hahnel Modus speed lights but want to integrate the canon 600 EX-2 RT speed light with them using the 2.4 Ghz, rather than optically.

A: Since you already have the Viper transmitter and Modus Speedlight, I would recommend the Viper receiver for use with the Canon 600 EX-2 RT. https://www.bhphotovideo.com/c/product/1037254-REG/hahnel_hl_viper_rc_viper_ttl_canon_receiver.html/specs

Q: 7. Will the receiver be damaged if it fires an old flash like the Vivitar 2800?

A: I have no idea,an older flash just didn't have ETTL Sorry I couldn't answer your question.

Q: 8. Is this cage tripod mountable?

A: Yes, on the bottom you will find the standard tripod mounting holes.

Q: 9. Will this work with the sony a99 ?

A: I don't personally own an a99 but i wouldn't see why not. Its big enough for 7D mark ii.

Q: 10. Does this receiver works with the other Hahnel Compi TF trigger system ?

A: no only the captur system.