Shipping Ground Rate For 65 Lb Box

Manfrotto Mt190x3 Aluminum Tripod With 324rc2 Joystick Head

Product Code: ga18439
Availability: In Stock

$1,259.85 $1,524.42

Qty

6 reviews Write a review

Description
Reviews (6)

The Manfrotto MT190X3 Aluminum Tripod is an addition to the popular 190 series, adding a Quick Power Lock System, ground level adapter, and an Easy Link attachment. It can hold up to 33 lb of gear, and has a maximum height of 63". The ground-level adapter replaces the center column to allow the tripod's mounting plate to sit just 3.5" above the ground with the legs at their widest angle.

The QPL system allows the three leg sections to be completely extended with one hand for simple set up. An Easy Link adapter attachment allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets. Each leg can be set at four different angles to accommodate uneven ground or rough terrain.

324RC2 Joystick Head Load Capacity: 7.7 lb Max Height: 67"

Key Specs
Head Mount Type	3/8"-16 Male
Primary Material	Aluminum
Load Capacity	33 lb / 15 kg
Maximum Working Height	63" / 160 cm
Max Height without Center Column	53.1" / 134.9 cm
Minimum Working Height	3.5" / 8.9 cm
Closed Length	23.2" / 58.9 cm
Weight	4.3 lb / 2 kg
Legs
Head Mount Type	3/8"-16 Male
Primary Material	Aluminum
Leg Lock	Flip Lock
Leg Sections	3
Independent Leg Spread	Yes
General
Load Capacity	33 lb / 15 kg
Maximum Working Height	63" / 160 cm
Center Column	Yes, Faceted: Removable
Max Height without Center Column	53.1" / 134.9 cm
Minimum Working Height	3.5" / 8.9 cm
Closed Length	23.2" / 58.9 cm
Bubble Level	No
Weight	4.3 lb / 2 kg
Packaging Info
Package Weight	5.45 lb
Box Dimensions (LxWxH)	26 x 5.4 x 5.4"

Related Questions and Answers

Q: 1. Are the flip leg locks made of aluminum of plastic?

A: The levers are plastic, but the clamp/lock that holds the legs in position are aluminum.

Q: 2. can you use Manfrotto 520BALLSH 75mm Short Half-Ball?

A: This tripod does not have a 75mm bowl therefore that item will not work on it.

Q: 3. will a manfrotto MVH502AH fit this tripod?

A: Yes, the Manfrotto MVH502AH will be compatible with the Manfrotto MAMT190X3.

Q: 4. Do I have to purchase a quick detach for my camera or does this head come with one

A: It comes with the plate, 200PL-14

Q: 5. What is the difference in leg diameters of the 190 and the 055?

A: This tripod has 3 segment legs. The 1st segment on top has a 22mm, the middle segment has 18mm and the lower segment is 13mm diameter.

Q: 6. What is the diameter of the mounting plate for the head?

A: It has a diameter of 2.36 inches.

Q: 7. what is the difference between this and Manfrotto MT055XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head? (other than there load capacity?)

A: Hi--the load capacity, the maximum height, the minimum height, the weight, and the folded length are different for the two tripods you are asking about.

Q: 8. Does this tripod setup come with a carrying case?

A: A tripod case is not included.

Q: 9. Can I attach MSTRAP or Optech strap with swiel hook to the rectangle loop on tripod near where you mount ball head, to carry the tripod. Asking this question because the loop looks like Madrid plastic and can break ?

A: The loop you see is specifically made for attaching carrying straps. It will not break under normal circumstances.

Q: 10. Are the rubber feet on this tripod replaceable with other feet? For example - Spikes?

A: No, the Manfrotto MT190XPRO3 does not take spiked feet.

Photo Jo	09/09/2024
This tripod is light weight and easy to use. Love it! 5

rman0987	04/08/2024
Previous tripod I owned was only rated at little over 5 pounds of weight it could support. Camera with lens was over 9 pounds. I wanted a tripod that could support the weight with a little room to spare, and this fit the bill. Used it a few times and am very satisfied with my purchase. 5

Andrew	07/06/2024
Excellent tripod. I am 6'4 tall, and this tripod can not only stand tall enough to have the camera at eye level for me (with an average sized ball head), but it can also collapse down to within a couple inches of the ground for macro shots, or whatever else the particular photo you're trying to get will require. To top it all off, it is very sturdy even with a full size DSLR and battery grip attached. The only drawback might be the weight, but this can be accomplished by buying the carbon fiber version of the tripod. I just didn't feel like spending the extra money, as it wasn't a huge weight difference and wasn't a big deal to me. 5

anyonymous	06/05/2024
I owned 5 various tripod. This one is not the most stable tripod, nor the short lightest tripod. But it balanced between heavy stable and light wobbly tripod. I used to like the short light tripod for traveling. But now I only take this one for wedding, event and travelling. 5

joekodak	03/04/2024
This is a very stable support for your camera. I bought this one to replace an old Manfrotto, cheaper version that had served me well for many years. The adjustability of the legs and center column is excellent. 5