The Zacuto Mini Z-Rail enables you to convert a 1/4"-20 threaded accessory to a Z-Rail mount. Use this small rail section with the Zamerican Z-Rail arm or with any standard NATO rail-mounted component.

The Mini Z-Rail mounts via its included 1/4"-20 screw and incorporates an extended ledge to prevent twisting.

Converts 1/4"-20 Thread to Z-Rail Mount    Works with Zamerican Z-Rail Arm    Works with Standard NATO Rail Mounts    Integrated Anti-Twist Ledge

Related Questions and Answers

Q: 1. can this be used on s1H?

A: Yes, there is an HDMI input.

Q: 2. Does this work on a Sony FX6?

A: Yes. The Zacuto Sony FX6 Z-Finder does indeed work on the FX6.

Q: 3. With the first version of Universal VCT, with a Sony FS7, the stock LCD was too close to the face, with no possibility of moving the camera forward. Did someone try this new version with a FS7? Is it possible to move the camera enough forward to get the stock LCD with stock bracket to a good distance of the face?

A: Sony designed the LCD to be used with the loupe when in shoulder mode. Thus the LCD mounting rod, while improved with a non-twisty square post with the F7 Mark II, is not really meant to extend the LCD in shoulder mode. Since Zacuto is all about getting the camera back on the shoulder, and not forward, I do not see this plate being able to do what you wish.

Q: 4. Do you need to buy the Axis Mini (for FS5) in order to mount the Z-Finder to the EVA1 ?

A: You do not. This mounts to the screen.

Q: 5. Do they sell a DTap to Lemo cable with power switch sans video cable?

A: Yes, Zacuto does sell a D-tap to Lemo cable with power switch & HDMI Video see link for details https://bhpho.to/Zacuto-dtap-4pin-HDMI-power-switch

Q: 6. Could someone kindly measure the thickness (and the length) of this Z-ACT plate? Not given in description or specs. Thanks!

A: The Zacuto ACT Camera Plate dimensions are 0.25" x 4" x 1.496".

Q: 7. Can this be used with the Panasonic EVA 1?

A: Yes, connection of the Zacuto Kameleon EVF Pro Kit will be via HDMA or SDI. HDMI DCI 4K UHD 4K 1080p 1080i 720p SDI 1080p 1080i 720p

Q: 8. What comes in the box for the Zacuto Tornado Grip for Z-Drive? If I purchase the Zacuto C100 EVF Recoil will I be able to attach the Tornado to it or will I have to purchase a bunch of other items?

A: What you see is what you get. You'll need the z-drive and 15mm rails to mount that to. Z-drive is good...tornado grip is not necessary. You'll also need focus gear rings if you're using dslr glass.

Q: 9. Is zacuto VCT arri M6 rosette applicable to other site of plate? It was on older version

A: No. The Rosette mount is only on the right side of plate. The design of the Model of plate does not allow you to move/ or attach another rosette on the left side. You would have to attach a rosette system on the rails to accommodate rosette mounts for left and right connections.

Q: 10. Does it compatible to black magic Ursa (big one,7.5 kg),Dr Asok

A: Yes should work fine, Its made to be universal. You might need some longer 15mm rods then the ones provided depending on your lens/rig set up. I think it comes with a 6 inch pair. It's more then solid enough to hold the weight.