The slate 2" Thick ProPanel Corner Bass Trap 24 x 48" from Auralex is a high-quality, fabric-covered, acoustic absorptive panel that is designed to fit within a standard 90° corner to increase low-frequency absorption. It can be used in rooms for broadcast TV productions, voiceovers, and mixing, and in recording studios to provide full-frequency control while offering a professional, aesthetically pleasing acoustic treatment.

In addition, ProPanels have a fiberglass core with hardened edges that meet the Class-A fire rating per ASTM E-84, making them a natural choice for use in areas with strict fire codes. Four CTC corner impaling clips are also included for easy installation.

With Four CTC Corner Impaling Clips    Fits In a Standard 90° Corner    Reduces Acoustical Reflections    Improves Speech Intelligibility    Controls Reverb    Back-Metered on 4' Sides of Panel    Class-A Fire Rated: ASTM-E84

Fabric wrapped acoustical absorption panels

Available as a corner bass trap

Edge hardened, back-mitered on 4' sides of panel

Reduce unwanted acoustical reflections

Tame chaotic reverberation

Improve speech intelligibility

Commercial and residential applications

Class-A fire rated: ASTM-E84

Related Questions and Answers

Q: 1. is this compatible with the canon r5c?

A: Yes, fit right on like the R5.

Q: 2. Does this come in a 3/4" size? I need a corner with 1" on one side and 3/4" on the other side.

A: These corners do not have any size options available. They are specifically for the Westcott Cine frames.

Q: 3. Is this the same model as the Atoll X+ on the Silence Corner site?

A: Yes, the Silence Corner Atoll X Rotating Camera Collar for Select Mirrorless Cameras (Black) is the same model as the Atoll X+ on the manufacturer's site.

Q: 4. Would their be a space If you used this corner to create a V-Flat with two scrim jims?

A: There would be a small gap between the frames when using this connector to form a V-flat.

Q: 5. Is it good with z 9 s lenses ? Thanks

A: The Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras is not compatible with Z9 and the lens compatibility can be found here: https://bit.ly/3mX6BiI.

Q: 6. Can you use a USB 3.1 Gen 1 Type-C Female to Type-A Male Adapter on this USB-C cable into a PC with only USB -A ports?

A: Yes. You will be able to plug this into a USB-A slot using the included USB-C to USB-A cable.

Q: 7. Compatible with Fuji GFX 100 ii???

A: The Silence Corner Atoll X Rotating Camera Collar for Select Mirrorless Cameras (Black) is compatible with the GFX 100II as long as the lens is 90mm or smaller in physical diameter.

Q: 8. Does this fit the Canon R50?

A: The Silence Corner Atoll C Rotating Camera Collar for Select Mirrorless Cameras is not compatible with the Canon EOS R50 Mirrorless Camera.

Q: 9. Sony RX100 VI -- Dashpoint10 or 20 best fit? I use a Dashpoint 10 for a RX100 V, and it's a good fit. For the RX100 VI I'm thinking the Dashpoint 10 may be a bit small--too tight a fit. I'm wondering if anyone has the Dashpoint 20 for the RX100 VI and if the case feels too large. Thanks!

A: The Sony RX100 VI is .1" thicker than a RX100V. If you like how it fits in the Dashpoint 10 that might be the best bet. The Dashpoint 20 will be about an inch bigger it will not be a snug fit.

Q: 10. I have plugged the mic into my Window (11) Pc. My computer recognizes it as a speaker thus the mic does not record anything. What should I do?

A: You would need to select the microphone as your audio input source device in the Sound settings.