The beige Countryman E6i Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation in stage performances, trade shows, houses of worship, auctions, lectures and much more.

This omnidirectional version effectively rejects unwanted sound and feedback better than a lavalier in almost any way you wear it, so it's very user-friendly for new and experienced users alike. Flexible microphone positioning is maintained, and the included windscreen minimizes the wind noise often associated with omnidirectional microphones.

The E6i is set apart from the original E6 with its softer flexible boom and silicon earpads. The flexible boom provides ease adjustability to accommodate multiuser applications.

A wide variety of colors and connections is available for use with various wireless transmitters. This version is beige and features a TA4F connector for use with Shure AD1 and ADX Axient wireless transmitters.

Switchcraft TA4F for Shure Wireless    Fits Shure AD1 and ADX Transmitters    W6 Sensitivity for Speaking and Vocals    Omnidirectional Polar Pattern    2mm Diameter Cable

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The E6i omnidirectional earset rejects unwanted sound and feedback better than a lavalier almost any way you wear it, so it's very user-friendly for new and experienced users alike.

This E6i's W6 sensitivity response is optimized to accurately capture speech and vocals.

Related Questions and Answers

Q: 1. If I am putting a microphone on it, do i need to buy an extra piece to go with the stand? Or does it come with it already?

A: This is just the stand - it does not come with a microphone clip. The part that actually holds the microphone is called a clip, and should come with the mic (guaranteeing that it will fit). Mic clips can be purchased for your specific mic.

Q: 2. When do you expect to ship these?

A: The Rode NTG4+ is currently available and shipping.

Q: 3. Hi, does anyone know how long the actual y-adapter is? Not the cable since that says in the description, but the actual y-adapter-cable?

A: I don't have a ruler to measure it exactly, but I'd say the Y-adapter is about 6 inches long.

Q: 4. Will this microphone pair function as a line input on a Zoom H1n to record 2 people?

A: The Polsen MO-IDL2-MK2 Dual Omnidirectional Lavalier Microphone is intended for use with smartphones and cameras. Because of the mic's 3.5mm TRRS connector, it may not function properly with the input on the Zoom H1n Portable Handy Recorder and may require the use of an adapter such as the RODE SC3 3.5mm TRRS Female to 3.5mm Right-Angle TRS Male Adapter Cable (B&H # ROSC3) to convert the plug from TRRS to TRS. As a better option for the H1n, you can use the Polsen OLM-20 Dual Omnidirectional Lavalier Microphone (B&H # POOLM20), which is intended for this purchase.

Q: 5. How long is the cord? Can a longer cord be attached? What type of cord?

A: The BOYA BY-BM6060 does not include a cable. The mic has an XLR output and can be powered by a single AA battery or phantom power. If you are connecting the mic directly to the mic input on a DSLR, mirrorless camera, or a camera or recorder with a 3.5mm mic input, then you will need to use a battery to power the mic and you can use an XLR female to 3.5mm TRS male cable. To connect the BY-BM6060 to a camera or recorder with an XLR mic input, use an XLR female to XLR male cable. If the device can supply phantom power, then a battery is not required to power the mic. However, if the device cannot supply phantom power or if you do not want to use power from the device, then use a battery is required. The cable can be as short or as long as needed.

Q: 6. How far from the subject this mic can record with quality? Is it good for advertising production?

A: Lots of variables here, but generally you should be within a couple of feet of the sound source - less if it is a noisy environment. This is more an aspect of proper location sound technique in general, rather than the quality of this particular mic. This mic is capable of very good quality sound, but even the most expensive mic will sound terrible if it is 10 ft from the subject.

Q: 7. can I plug this into a Sennheiser transmitter?

A: No, unfortunately not. The Polsen MO-IDL2-MK2 Dual Omnidirectional Lavalier Microphone has a 3.5mm TRRS connector that is not compatible for use with the 3.5mm TRS locking input on a Sennheiser transmitter. As a compatible alternative for a dual lavalier mic, you can use the Saramonic DK3A2 Dual Mini Omni Lav Mic with Locking 3.5mm for Transmitters, Recorders, Cameras, Mixers with Plug-In Power (B&H # SADK3A2).

Q: 8. Does this work with Rode family of wireless mic's ?

A: The Insta360 Microphone Adapter for X4 will work with the series of Rode Wireless mic kits. The Microphone adapter has a 3.5mm audio port for connecting audio receivers.

Q: 9. What is the country of origin for this product?

A: Australia

Q: 10. There appear to be three settings for the high-pass filter: the switch can be positioned towards the front of the mic (bent line symbol), in the middle (straight line symbol), or towards the back of the mic (circle symbol). I gather the bent line represents "hi-pass filter on", the straight line "hi-pass filter off", but what does the circle setting do?

A: The circle setting turns the mic off.