Styled in silver, the SPL Phonitor xe is a headphone amplifier designed for pro audio and hi-fi applications. It sports XLR and RCA inputs, and lets you switch between them with the turn of a knob. Output jacks for headphones are provided on both the front and rear of the Phonitor XE.

You'll note one set of 4-pin XLR inputs for balanced headphones, and one set for conventional, 1/4" unbalanced headphones. You can switch between the inputs on the front and rear, so you can compare different sets of headphones easily. Please note that you cannot use both balanced and unbalanced headphones at the same time.

Of interest to audiophiles who usually prefer loudspeakers is the Phonitor Matrix, which aims to create an experience akin to listening to studio monitors. It simulates the effect of audio emanating from one speaker hitting the opposing ear. More than a simple crossfeed controller, this Matrix can simulate different-sized listening environments and different speaker angles. This application is designed not only to promote a more realistic listening experience, but to reduce listener fatigue. The control for this is variable; you can set the level of crossfeed and set the simulated speaker angle to emulate a variety of speaker-placement scenarios. Ideally, you'd set this control to correspond to your actual loudspeaker arrangement.

You'll also note a Mode switch that dictates several types of operation. Stereo and mono playback modes are achievable through this switch, as is a Laterality mode. Laterality aims to correct the mix for any hearing damage you might have incurred throughout your long career of mixing/listening to records; if you experience broadband hearing in the left ear, for example, you can favor more signal coming into the left channel. You're given 2.25 dB of range for this control, making the adjustments very fine indeed.

Via DIP switches on the bottom of the unit, you can drive headphones that require more output power, or change the sensitivity of the RCA input between -10 dBV and 0 dBu. The Phonitor xe utilizes SPL's VOLTAiR 120V Rail Technology to maintain high-headroom and preserve audio clarity by processing audio signals with ±60 VDC of power.

XLR & RCA Ins for Studio & Consumer Gear    Balanced & Unbalanced Headphone Outputs    Simulate Loudspeakers with Matrix Switch    Crossfeed & Angle Settings    Stereo & Mono Modes    Left/Right Laterality Adjustment Knob    VU Meters (0 dB = +4 dBu)    Controllable via Any IR Remote    120V Technology for High-Headroom

The Phonitor xe features both balanced and standard headphone outputs on the front back. Permanently connected headphones can be routed into rear panel so the headphone cable does not get in the way. A switch on the front lets you toggle between front and rear outputs. Please note that a standard headphone output always takes priority over the balanced headphone output; there will be no signal at the balanced headphone out if you've already plugged a pair of headphones into the standard headphone output.

Two VU meters display the input levels for your selected source. The meter indicates levels from -20 to 5 dB, where 0 dB corresponds to +4 dBu. You can lower the sensitivity with the VU level switch, if you so choose.

The Phonitor xe has a built-in advanced dual-power amp that drives balanced headphones with twice the power of the standard 1/4" jack. This tightens the bass response and makes the overall playback more transparent.

A frequency-dependent Matrix section allows you to simulate the experience of listening to different-sized monitors in different-sized rooms. You can use this control to match the headphone amp more closely to your particular environment, or to hear how the mix may sound in different environments. Use the Crossfeed knob to manipulate the apparent size of the room, and the Angle knob to adjust the apparent speaker angle.

Use any IR remote control to change settings on the Phonitor xe.

Related Questions and Answers

Q: 1. is the headset adjustable for smaller person?

A: The Sennheiser RS 175 Digital Wireless Headphone System BH #SERS175 will have an adult fit and will fit most adult sizes but would not fit smaller children.

Q: 2. Replacement ear pads for Sennheiser RS 175 ?

A: Yes, you can purchase replacement pad for RS 175 HeadPhones.

Q: 3. I'm planning to use an iPhone XS with a battery powered shotgun mic that has a cable terminated with a 3.5mm TS connector. Is this adapter going to work?

A: In order for this to work, you would also need to use the following adapter in addition to the Apple one . https://bhpho.to/2MHYYem

Q: 4. Will this work to connect my Xs iPhone to the earbuds I was using on my old iPhone 6?

A: Yes it will work.

Q: 5. Is this connector compatible with iPhone 11?

A: Yes, the Apple Lightning to 3.5mm Headphone Jack Adapter BH #APLAADAP is compatible with all iphones that use the Lightning connection which is the connection on the iPhone 11.

Q: 6. I'm looking to hook up external microphone to my iPhone 14 pro. Would this Apple adapter work for me ? Microphone Is Sunpak

A: Yes, the Apple Lightning to 3.5mm Headphone Jack Adapter BH #APLAADAP would be the adapter needed to connect a 3.5mm mic.

Q: 7. Can I listen to the TV while my Dad listens to the TV through the headphones?

A: YES My TV allows me to listen with the head set and my wife is able to listen at the volume that she is comfortable with, or she can mute the sound.

Q: 8. My dad likes the volume so high that you almost have to shout above the TV to hear yourself. Can you turn these up that high?

A: The Sennheiser RS 175 Digital Wireless Headphone System (BH # SERS175) features an independent volume control that delivers vey high audio volumes. Your individual circumstances may require that your dad wears the headphones.

Q: 9. Does this provide a 3.5mm TRS (Stereo Audio), or TRRS (Stereo Audio + Mic)?

A: The Apple Lightning to 3.5mm Headphone Jack Adapter BH #APLAADAP is TRRS.

Q: 10. Is this an OEM Apple product? Are you able to make phone calls with the headset when using the adapter?

A: Yes this is Legititmate apple product and yes you can make calls and listen to music. On the iPhone 7