Customize your PNM-9000VQ multidirectional camera with the WiseNet P Series 2MP 2.4mm Sensor Module & Fixed Lens from Hanwha Techwin. This module integrates a 1/2.8" 2MP CMOS sensor and a 2.4mm fixed lens, enabling the PNM-9000VQ to capture video at up to 1945 x 1097 resolution in a 135.4 x 71.2° field of view. Featuring electrical day/night functionality and 150 dB wide dynamic range, the module is designed to deliver clear images in low-light conditions down to 0.055 lux and to balance exposure in scenes with sharp lighting contrasts.

For PNM-9000VQ Camera Body    1/2.8" 2MP Progressive Scan CMOS Sensor    1945 x 1097 Effective Pixels    Minimum Illumination: 0.055 Lux    Electrical Day/Night    2.4mm Fixed Lens with f/2.0 Aperture    135.4 x 71.2° H/V Field of View    150 dB Wide Dynamic Range

Related Questions and Answers

Q: 1. Will this work on a Canon C500 Mk II?

A: Yes, the Photographic Solutions Sensor Swab ULTRA Kit (Type 3) has the correct swab size for the Full-Frame CMOS Sensor built in the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body.

Q: 2. how long is the cable in relax position?

A: the cable length has not been provided by LanParte

Q: 3. Is it compatible with Fuji X-T2 camera ?

A: Yes, it is compatible with the Fuji XT2.

Q: 4. Would this work with a Zacuto Gratical evf?

A: This adapter should work, but it is recommended to use Zacuto's adapter for best results: Zacuto LP-E6 to D-Tap Power Cable (SKU: ZAPTZACE6), https://www.bhphotovideo.com/c/product/1078732-REG/zacuto_pt_zac_e6_lp_e6_to_d_tap_power.html

Q: 5. Will this work with a Sony Alpha 7r 4 camera and a 12v D-tap power supply? Like this one? BH #SHPWRA12F60 Will it drop the 12v voltage to 7.2-8V range that is Sony spec? Thanks, David

A: No it will not. You need a D-tap adapter with the NPFZ100 style dummy battery such as the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable (B&H # KODTSA7SDB MFR # KB-DT-SA7S-DB). The adapter that you have selected is for previous models such as the A7RII

Q: 6. What are the dimensions of the Travel Pouch and will the Orbit Hepa Blower fit in the pouch?

A: The Photographic Solutions Sensor Swab ULTRA Kit's (Type 3) pouch is 6 inches tall, making it a little too short to contain the Photographic Solutions Orbit Hepa Blower (B&H # PHORBIT).

Q: 7. Can you use this cleaning kit on a SLR film camera? Specifically the sensor on a Canon AE-1 and Nikon F3?

A: Film cameras don't have image sensors--that's only found on digital cameras.

Q: 8. Is this the right size for a Nikon D200 & also a D80 sensor?

A: Yes this kit is suitable for the D200 and D80 bodies.

Q: 9. If I have a 70V distributed system and want to only control volume for one zone, can I use this as a speaker level input/output? Setup is one 120W, 70V amp with 4 70V attenuators to split into 'zones'. We would like to install the noise control after just one attenuator so we can still set base volume level (or even use this to replace a single attenuator). Trying to avoid having to use multiple amps and an expensive mixer. Thanks!

A: Hi Chris,first please accept my apologies for late answer but I hope it will help.As you describe how you want to use ANS501 ,it will not work because you cant control 70V signal with it.ANS501 accept only line input(balanced or unbalanced) so you have to put it between signal source(for eg. cd player,tuner) and 70V amp.You said you would like to install ASN501 after attenuator -this is also not possible.ANS501 electronically adjust a level of the background music in places where ambient noise levels are continuously changing so in case that you cant hear good the BGM or page announcement you have to turn att in the room louder and latter turn att lower .With ANS501 you dont have to do this because it raise up the music level automatically( microphone sensor module measure ambient noise level) ) in the zone which supply your 70V amp no matter how many 70V att you have.ANS501 raise up input signal to 70V amp and sound is higher no matter in which positions are 70V att.(except in off position-no sound). Conclusion is that you cant control 70V signal with ANS501 and you cant use it to control speaker level input/output (only when you have system with active speakers).BRKresimir PoslekAudio Video Medij

Q: 10. I'm trying to figure out what exactly this dummy battery does, why is it called "fixed voltage"? Can you connect to any source and it will provide to the camera the correct voltage? If not, what source would you use?

A: Fixed Voltage means it will provide only the proper voltage to power the cameras that use the NP-FW50 style Battery Pack. You can connect it to pretty much any D-Tap source.