The white Lav Concealer for Sanken COS-11 from Bubblebee Industries is for mounting the Sanken COS-11 lavalier microphone (sold separately) on the body and in clothing or costumes. This soft, pliable mount can be used to affix to surfaces while also acting as a shockmount and protecting the microphone capsule from vibrations and friction—making for a better sound recording. In addition, the Lav Concealer for Sanken COS-11 includes a wire clothing clip, a wire fabric guard, and six pieces of The LAV Concealer tape.

Secures & Conceals Lavalier Microphone    Wire Clothing Clip    Fabric Guard    6 x Pieces of Lav Concealer Tape    Mounts on Skin or Clothing    Soft, Pliable Mount    Offers Different Mounting Options    Easy to Apply

Keeps material away from the COS-11 capsule in tight spaces under or in clothing, protecting the mic from friction noise and vibrations.

Uses a molded rubber compound made for vibration and friction absorption.

Available in a matte black or a matte white finish. The matte finish is non-reflective for discrete hiding.

The removable and movable wire-clothing clip allows you to mount in many ways: from the front, back and top, or bottom of The Lav concealer.

The removable wire fabric guard keeps fabric from touching the capsule. The combination of wire and rubber materials acts as excellent friction absorption, cutting any transmission of friction to the mic capsule.

Provides many options for mounting the Sanken COS-11 on talent easily, effectively, and professionally, many times under high pressure on sets.

Related Questions and Answers

Q: 1. Are the gain changes made in the receiver or in the transmitter? If I set the gain lower, will it reduce the gain on the receiver's internal recording, too? Also, is the second channel internal safety track done as an analog reduction in the transmitter, or as a digital reduction in the receiver?

A: There is a gain control on the receiver which provides a three-stage pad to cut your output level in 12 dB increments. A single click of the gain control button allows you to select between high (0 dB), medium (-12 dB), and low (-24 dB) gain settings. The level icon in the middle of the screen indicates which gain setting is selected. An additional fine gain control mode can also be enabled in the Rode Central app which will expand the three-stage pad to a 10-stage pad, going from 0 dB to -30 dB in 3 dB increments. This allows you to precisely tailor the output level going to your recording device. It also provides access to an extra 6 dB of gain reduction, which is handy if you are using a recording device with high sensitivity. Be aware that the gain control only affects the 3.5mm output of the Wireless GO II, not the digital USB-C output. If you are using the Wireless GO II with a smartphone or computer and need to adjust the gain, you can do so in the app or recording software that you are using. The safety channel can only be activated in 'Merged' recording mode which combines the output of the two transmitter channels into a single summed output. When using the safety channel, you will have two channels of identical audio with the volume level on the safety channel reduced by 20 dB, preventing overload that could create distortion.

Q: 2. Can the Rode Wireless GO II be used for calls and Facetime?

A: Yes, the Rode Wireless GO II mic system can be used for calls and Facetime with devices that work with the apps and an external microphone.

Q: 3. Does this work on the Sanken CS-3e on a Sony FX3?

A: Yes, the Sanken ROCS Rubber O-Rings cam be used with the Sanken CS-3e Short Shotgun Microphone and Sony FX3 Cinema Camera.

Q: 4. Will this work with the rode ntg2 and the canon c100 markII?

A: Yes, the Sanken rubber O-rings will work with the Canon C100 MKII to secure the Rode NTG2.

Q: 5. Will the o rings fit with the Rode NTG2 on Sony's PXW-X70?

A: Thank you for you inquiry. The O-Ring is normally used with the CS1E which is 19mm and the Rode NTG2 is 22mm. I would say that should not be too much of a stretch and will work fine. Please let us know if you have any other questions or concerns.Best,Peter Hanniganplus24/Sanken323-845-1171

Q: 6. Will these fit a RDE NTG-3?

A: The Sanken O-Rings will fit a Rode NTG-3 and mics with a similar diameter 19-22mm.

Q: 7. How do u connect to iphone wirelessly?

A: u need two items to connect to a phone depending on what type phone you have your going to need lighting if iphone or type c if android or apple ipad links below https://www.bhphotovideo.com/c/product/1048151-REG/rode_sc4_trs_to_trrs_adaptor.html?sts=pi&pim=Y https://www.bhphotovideo.com/c/product/1442282-REG/apple_mu7e2am_a_usb_c_to_3_5_mm.html?sts=pi&pim=Y https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html?sts=pi&pim=Y

Q: 8. is it ok for camcorder?

A: Yes, you can definitely use the Wireless GO II system for camcorders.

Q: 9. How long does the unopened powder packets last before it is considered unusable?

A: According to Ilford, an unopened package of ID-11 Developer will keep indefinitely when stored in a cool and dry place within a temperature range of 44-68° F.

Q: 10. Can I use any USB C to USB C cable for recording with an Android phone? Or do I need the cable Rode makes?

A: Any USB cable that will carry data will work.