The HDMI Wireless Video Transmitter from FeiDu can be used to transmit to up to four FWT-200 receivers (available separately). It supports a 650' range line of sight with zero latency and a resolution of up to 1080p at 60 fps. This transmitter features an HDMI input, an HDMI output, and an integrated L-type battery plate. It can be secured to a camera or other HDMI video source via built-in 1/4"-20 threaded holes. A hot shoe adapter is included for attaching to cameras without 1/4"-20 threads.

This transmitter can be powered by an external microUSB 5V (power bank available separately), 7-25 VDC input, or using a F970, F750, or F550 battery (available separately), which is compatible with the integrated L-series battery plate. Two 5 GHz antennas, an HDMI cable, and a carry bag are included.

HDMI Wireless Video Transmitter    Two HDMI Wireless Video Receivers    Up to 650' Range Line of Sight    Up to 1080p Resolution at 60fps    10 Antennas    Three HDMI Cables    Three Hot Shoe Adapters    Carry Bag

Dynamic Frequency Selection (DFS) function detects radar signals that must be protected against interference from 5 GHz radios by dynamically switching the operating frequency of the 5 GHz radio to one that does not interfere with the radar.

Noise rejection

AES-128 encryption security

Uninterruptible power supply when changing batteries with microUSB plugged in

F970, F750, and F550 battery (available separately) and micro USB 5V (power bank) can be used together for a limited time for battery exchange without signal drop off

Battery quick release design with a hot shoe adapter included for attaching to cameras without 1/4"-20 threads

Related Questions and Answers

Q: 1. What is the difference between the "Enhanced" and the " Standard" version other than the antennas being added?

A: Hi Gabriel, the external antennas on the transmitter is the only difference between the "Enhanced" and "Standard" version of Mars 300 Pro. You can choose either version depending on your application environment. Normally the "Enhanced" Version has two main advantages due to the external antenna: ① Better Performance while there is interference ② You can mount the Transmitter either horizontally or vertically since the external antenna can be bent to get the best transmission signal. While the "Standard" Version is more compact with all antennas built-in.

Q: 2. I would like to use this at church to wirelessly transmit song lyrics and scripture from the laptop at the back of the room to the projector, which is about 40 feet away, line of sight, except there may be a room full of people in between rx and tx. Will this device work for me?

A: The Hollyland Mars 300 will work for your setup. Just make sure the TX & RX are in a line of sight and the RX is slightly elevated.

Q: 3. If I am recording 4k video on GH4 and wirelessly transmitting to Elvid 4K monitor, will I be able to use this transmitter/receiver set? Will I need to shoot lower quality video, or will the video seen on the monitor just be in 1080p? If I can shoot 4k video on this set up, will this work adequately when pulling focus for a 1st AC?

A: The FeiDu HDMI Wireless Video Transmitter and Receiver Set does not support 4k video signals. We would recommend the Teradek Spark 4K Transmitter/Receiver Set for lag free 4k wireless video transmission up to 30p.

Q: 4. It says pro version support 1080 at 59.94p but the monitor shows 1080 at 60p. Is there a way to select the output frame rate to be exactly 59.94p? Otherwise there are no benefits in 300 pro version compare to 400s version.

A: Hi Sergey, the Mars series only supports round frames.

Q: 5. Can I have multiple transmitters send to the same receiver to monitor multiple cams?

A: No. Transmitters will transmit to their own receivers.

Q: 6. What is the build material?

A: The Mars 300 Pro has a metal housing.

Q: 7. Can you use two of these systems at the same time for multi-cam shooting?

A: Hi Jay, yes, of course. • Choose different frequency channels with the number difference between each two channels bigger than 2 • Place each RX at least 0.5m away from the other • Place all RX 1.7m above the ground

Q: 8. Does this device require the Android or iOS phone/tablet to be on wifi as well? Or culd this be used on location where there's no wifi signal?

A: Hi, the device works on wifi frequency (5 GHz), however you don't need an additional wifi transmitting unit on location. In other words, the Transmitter connects directly to the phone/tablet

Q: 9. Can i use the Kondor Blue L series dummy baterry to power this?

A: Yes, you can use the Kondor Blue L Dummy Battery with the Mars 300 Set.

Q: 10. If I buy the 300 pro transmitter only.. can I run the app..an connect it too a monitor without the reciever?

A: Yes, you can purchase this and run it only to an App. It has an HDMI loop out to connect to a monitor as well.