The HDMI Wireless Video Transmitter from FeiDu can be used to transmit to up to four FWT-200 receivers (available separately). It supports a 650' range line of sight with zero latency and a resolution of up to 1080p at 60 fps. This transmitter features an HDMI input, an HDMI output, and an integrated L-type battery plate. It can be secured to a camera or other HDMI video source via built-in 1/4"-20 threaded holes. A hot shoe adapter is included for attaching to cameras without 1/4"-20 threads.

This transmitter can be powered by an external microUSB 5V (power bank available separately), 7-25 VDC input, or using a F970, F750, or F550 battery (available separately), which is compatible with the integrated L-series battery plate. Two 5 GHz antennas, an HDMI cable, and a carry bag are included.

Transmits to up to Four Receivers    Supports up to 650' Range Line of Sight    Up to 1080p Resolution at 60 fps    HDMI Input & Output    Integrated L-Type Battery Plate    Battery Quick Release Design    Two 5 GHz Antennas    HDMI Cable    Hot Shoe Adapter    Carry Bag

Dynamic Frequency Selection (DFS) function detects radar signals that must be protected against interference from 5 GHz radios by dynamically switching the operating frequency of the 5 GHz radio to one that does not interfere with the radar.

Noise rejection

AES-128 encryption security

Uninterruptible power supply when changing batteries with microUSB plugged in

F970, F750, and F550 battery (available separately) and micro USB 5V (power bank) can be used together for a limited time for battery exchange without signal drop off

Battery quick release design with a hot shoe adapter included for attaching to cameras without 1/4"-20 threads

Related Questions and Answers

Q: 1. Can there be multiple transmitters to one receiver?

A: Unfortunately no that is not possible.

Q: 2. whats the recommended power adapter for receiver ?

A: We recommend using this dummy battery power supply with this Vaxis Atom 500 kit. You would need one for the TX and the RX . Power2000 AC-F550 AC/DC Adapter with Sony L-Series Dummy Battery BH #POACF550 https://bhpho.to/3sbUu0D

Q: 3. In a multicam enviroment, how many systems can I have on at the same time?

A: The number of systems you could use in the same environment will depend on how much RF interference there is, but the Accsoon CineView 2 SDI/HDMI Wireless Video Transmitter/Receiver Kit supports up to 20 channels.

Q: 4. i bought Mars 400s but can not get output 59.94 does Pyro S 4k have that out put ?

A: The Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System can output 1080p59.94 via HDMI or SDI but is limited to a max 30 fps output in 4K via HDMI and cannot output 4K via SDI.

Q: 5. I see there is no loop out on the transmitter for SDI, can I use the HDMI out on the transmitter if I use the SDI input?

A: Yes, the Accsoon CineView 2 SDI/HDMI Wireless Video Transmitter/Receiver Kit transmitter can loop out the SDI input through the HDMI output.

Q: 6. The transmitters keep getting very hot and the picture freezes..how can we overcome this?

A: Wireless video transmitters tend to get hot without much of a workaround. It might be best to move onto a system with built in heat syncs similar to teradek.

Q: 7. Hello! Is it possible to transmit using 4 systems with 4 camaras?

A: When using the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System, you could work with four kits of TX and RX in the same location. Please note that you will be limited to two sets if you are working in broadcast mode.

Q: 8. Does this transmit timecode?

A: Yes, this will support timecode.

Q: 9. Can you change the antennas on the Pyro S 4K? and if it is possible that in some update it will be implemented?

A: The antennas on the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System are not permanently installed and are removeable. We are not aware of any updates to the antennas at this time.

Q: 10. Will this transmit and receive 1080i or just a p signal?

A: Yes, the Vaxis ATOM 500 SDI Wireless Video Transmitter and Receiver Kit (SDI/HDMI) (B&H# VA20500TR01) can transmit and receive 1080i.