• Sennheiser wireless mic systems are an industry standard, prized by professionals for their clarity and reliability. The XSW-D system allows first-time and budget-conscious users to get their hands on genuine Sennheiser sound quality without breaking the bank.

• Nothing ruins a take like hearing the weather report coming through your mic. Unlike traditional analog wireless systems, the XSW-D digital system operates in the 2.4 GHz ISM band, protecting the integrity of your signal from interruptions and drop outs caused by TV channels, radios, or other sources.
• Thanks to Sennheiser's channel allocation and interference management technology, the system selects the best operating frequency and automatically switches to a clean channel to provide reliable transmission at a distance up to 250' line of sight.

• Because the XSW-D system operates in the license-free 2.4 GHz band, you don't have to worry about local licensing laws, frequency coordination, and other technical hassles.
• Simply let the system pick a channel for you, and you're ready to get started—whether you're working at home or anywhere in the world.

• Eco-friendly USB-rechargeable lithium-ion battery—1-hour charging to reach 50% of battery time 
• 5-hour total battery life gives you plenty of shooting time 
• Conveniently recharge battery via USB while in operation or during breaks throughout the day
• Up to five systems can be operated simultaneously in the same environment
• Low 3.9 ms latency with aptX Live codec specifically designed to maximize digital wireless microphone performance
• Mute from either transmitter or receiver
• Multi-pairing lets you quickly switch between multiple transmitters linked to one receiver (note that only one transmitter can broadcast to one receiver at a time)

Related Questions and Answers

Q: 1. can i use the transmitter connected to a mixer with 3.5mm jack and receive audio into receiver then to dslr directly?

A: Yes you can. NOTE: The input on the transmitter is Mic Level, so make sure that the output on your mixer is set to Mic level otherwise your audio may clip or sound distorted.

Q: 2. Does it work with YN600-EX-RTII?

A: No, the Yongnuo YN32-TX TTL 2.4GHz Wireless Flash Transmitter for Sony Cameras cannot fire the radio receiver inside of the Yongnuo YN600-EX-RT II.

Q: 3. Will this fire an off-camera Sony HVL-F43M flash and does it require a receiver for the flash? Camera is a Sony A7iii.

A: No. The following system runs off its own protocol system. Will work only work with the following units mentioned Yongnuo YN650EX-RF, YN685EX-RF, YN685II, YN720, YN685, YN560IV, YN660, YN560III, RF603, RF602

Q: 4. can i use this directly from a mixer with 3.5mm jack output and send it to receiver then to dslr? i dont want to use lav mics but use this system in my mixer as wireless transmitting audio.

A: Yes you can. NOTE: The input on the transmitter is Mic Level so make sure that the output on your mixer is set to line level otherwise your audio may clip or sound distorted.

Q: 5. Did it works with RF-603II triggers?

A: The Yongnuo YN32-TX TTL 2.4GHz Wireless Flash Transmitter for Sony Cameras BH #YOYN32TX is compatible with the RF603.

Q: 6. Does anyone know if this provides power to Lavs like the the Cos-11 that require power?

A: While I have not tried it with this particular Lav, Sennheiser did say that this systems wiring scheme is identical to the Sennheiser EW Evolution wireless and is compatible with all mics that are wired for the Evolution wireless.

Q: 7. The B&H spec says output is 1/8" TRS line-level unbalanced. However unbalanced is normally only 2 conductors (TS) not TRS right? Can anyone clarify the wiring of the output connector? Sennheiser's site and manual are useless in this regard.

A: Tip = hot Ring and Sleeve are shorted for sheild.

Q: 8. Does the transmitter accept mic and line level inputs?

A: Microphone level only: "Both transmitters are designed to transmit signal from a mic only (not line level from a mixer or recorder)."

Q: 9. Does it work with sony a6000?

A: Yes, the Yongnuo YN32-TX TTL 2.4GHz Wireless Flash Transmitter for Sony Cameras should work with the Sony a6000 camera. Note Yongnuo does not list specific camera models.

Q: 10. Can I use 2 wireless mics on 1 receiver? Or would I have to buy 2 complete sets?

A: Hi Jacob - if you'd like to mic two separate talent, you would need two systems (or - in the case of the ENG kit, you could add-on another receiver to minimize the expense); each transmitter and receiver has a one:one relationship and a receiver cannot receive simultaneous input from multiple transmitters.