Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. Does it have the holes for the bungees? The picture and description need clarification of this matter.

A: This product is held to its dedicated frame using a series of clips in addition to the bungee snakes that are included with the frame. That frame would be the Sunbounce Sun-Scrim Butterfly Scrim Frame (12x12'), B&H # SUFSS12. https://bhpho.to/2yyBGwI

Q: 2. Is this a breakaway frame, or one solid piece?

A: This frame will break down for transport or storage.

Q: 3. What are the technical specifications for the preamp, e.g., gain, noise floor, frequency response, etc?

A: The Roland Web Presentation Dock BH #ROUVC02 Full published specifications: VIDEOInput ConnectorHDMI IN : HDMI type A * HDCP not Supported * Multi-format SupportedInput Formats480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/29.97p, 1080/25p, 1080/59.94p, 1080/50p, SVGA (800 x 600) 60 Hz / 75 Hz, XGA (1024 x 768) 6 0Hz / 75 Hz, WXGA (1280 x 800)60 Hz / 75 Hz, HD (1280 x 720) 60 Hz / 75 Hz, SXGA (1280 x 1024) 60 Hz / 75 Hz, FWXGA (1366 x 768) 60 Hz / 75 Hz, SXGA+ (1400 x 1050) 60 Hz / 75 Hz, UXGA (1600 x 1200) 60 Hz, FHD (1920 x 1080) 60 Hz * The refresh rate is the maximum value of each resolution. * Conforms to CEA-861-E, VESA DMT Version 1.0 Revision 11.Output ConnectorsUSB STREAM : USB 3.0 Type-BUSB Video Output FormatYUY2 (Uncompressed), Motion JPEG (Compressed)USB Video Output Resolution1920 x 1080, 1280 x 720, 640 x 480 * Maximum frame rate is 60 fps.AUDIOAudio ProcessingSample Rate 48 kHz, 24 bitsAnalog ConnectorsMIC : XLR type (Balanced, Phantom power DC 48V, 14 mA Max) HEADSET : Stereo miniature phone type (CTIA, PLUG-IN power) AUX IN : Stereo miniature phone type MONITOR OUT : Stereo miniature phone typeDigital ConnectorsHDMI IN : HDMI Type A USB STREAM : USB 3.0 Type-BNominal Input LevelMIC IN : -54 to -14 dBu (Maximum input level : +4 dBu) HEADSET : -20 dBu (Maximum input level : -2 dBu) AUX IN : -10 dBu (Maximum input level : +8 dBu)Nominal Output LevelMONITOR OUT : -10 dBu HEADSET : 9 mW + 9 mW (32 ohms load)Input ImpedanceMIC IN : 5.8 k ohms AUX IN : 10 k ohms HEADSET : 1 k ohmsOutput ImpedanceMONITOR OUT : 1 k ohms HEADSET : 22 ohmsDigital Audio FormatHDMI IN : Linear PCM, 48 kHz / 44.1 kHz, 24 / 20 / 16 bits, Stereo USB STREAM : Linear PCM, 48 kHz, 16 bits, StereoAudio EffectsAnti-Feedback, Echo Canceller, Ducker, Voice Changer, Reverb, Noise Suppressor, Equalizer, Expander, Compressor, DelayAudio File PlayerNumber of tracks : 2 Data Formats : WAV (Linear PCM, 48 kHz, 16 bits, stereo / mono) Maximum Time : 5 seconds / trackOTHERSOther FunctionsMIC Mute (TALK button) Audio Mute (AUDIO OUT button) Video Off (VIDEO OUT button) Slideshow ControlPower SupplySupplied from the computer via USBCurrent Draw900 mA (4.5 W)Operation Temperature+0 to +40 degrees Celsius +32 to +104 degrees FahrenheitDimensions124 (W) x 117 (D) x 52 (H) mm 4-15/16 (W) x 4-5/8 (D) x 2-1/16 (H) inchesWeight (excluding cables)460 g 1 lb 0.3 oz Accessories: Leaflet "Read Me First" USB 3.0 Cable * 0 dBu = 0.775 Vrms

Q: 4. I can't find anything about the preamp, even on Roland's site. Is there any info about the gain? Take the typical worst case of an SM7B - would I have to use a CloudLifter or similar product?

A: The Roland Web Presentation Dock BH #ROUVC02 • MFR #UVC-02  features a studio -grade microphone preamp with plenty of gain available. No Cloudlifters or similar devices would be necessary for use with microphones like the Shure SM7B or EV RE20.

Q: 5. Does the color and contrast change like in the video? I want to keep the natural sun light look, just soften harsh highlights.

A: The Glide Gear Butterfly 3-in-1 Silk Scrim Diffuser Kit includes three scrim sizes, and each one is a 1-stop diffusion material. This diffusion material, when stretched out on the frame and placed above your subject, will soften the natural light and have no affect on the color. Shadows will become more open and highlights will be toned down.

Q: 6. Is this strap in a retail packaging? Picture of packaging?

A: Kalt Web Camera Strap comes in a plastic seal case.

Q: 7. can you use Matthews 6x6' Overhead Fabrics with this frame?

A: Yes, it is possible to use Matthews 6x6' Overhead Fabrics with the Glide Gear Butterfly 3-in-1 Silk Scrim Diffuser Kit.

Q: 8. How long is this strap?

A: The strap is roughly 3 feet long and is adjustable.

Q: 9. What is the weight for this 8x8 frame?

A: Don't have an exact weight, but the whole thing in the shipping box is 11lbs. subtract maybe 3lbs for cardboard, more or less, and best estimate is 8lbs.

Q: 10. Can you mount this unit on top of a flat panel display? Is there a way to wall mount it?

A: As others said, You can place it on top of a TV without an issue. However, it does not have a wall mount option.