Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. Is size A for the 600d pro? Where can I find the diameter in mm?

A: The Aputure Spotlight Max 10-Piece Gobo Kit (Size A) features gobos that are 3.9" / 100 mm in diameter. They are compatible with Aputure spotlight mounts.

Q: 2. What is the optimum distance or range for this projector? Does it have a zoom feature?

A: While this light lacks a zoom feature, its optimal range is within 1 meter from the subject.

Q: 3. How can I get a remote for this particular projector?

A: To remotely control the American DJ Gobo Projector IR, you can purchase the American DJ IR Remote for Inno Pocket Spot (B&H # AMUCIR).

Q: 4. I love this cutter but how do you replace the razor blade?

A: 1-put finger under ribbed portion of sliding blade holder top and pull up. As it swivels (rotates) up it will expose blade2-Slide plastic holder of blade at top side of blade over,3- grab blade from top protected end and pull it strait up and out of holder.(it slides out sideways)4-slide new blade in exactly in reverse of how you pulled old blade out.5-slide plastic holder back over new blade top holding it in.6- Swivel (rotate)top of sliding blade holder back down into position and your ready to go.7- once you know how to do it the whole process takes ten seconds.

Q: 5. Does these fits Aputure Spotlight Mount Set with 36° Lens?

A: Yes, you can use Godox Gobo Set VSA-GS4 for Aputure Spotlight Mount Set with 36° Lens due to the same size that it uses for gobo 3.4".

Q: 6. hey guys, I'm looking for a focus ring to adapt on my voigtlander 50mm 1.5 nokton, the filter size is 49mm and the lesn is very small, would this gear actually fit correctly my lens?

A: I use these on my Canon FD series lenses. They work great. B and H takes returns so you may want to buy a set as I did. All my gears fil all my lenses so I kept them.Good Luck!

Q: 7. when i go and try and purchase a Gobo the size they offer is 26.8mmODx24mmIA is that the same as 26.8mm viewable size 24mm?? for this ADJ projector?

A: the actual gobo size is 26.8mm. The viewable size after installed is 24mm. The gobo maker should specify it is for this fixture.

Q: 8. Will this trim a 13x19" sheet of photo paper to 12 x18"?

A: You will have trouble trimming 13" to 12". The Falcon Marshall can only cut up to 14". When you rotate the paper, you will only be able to trim one inch off that side, since you can only reach 14" on the long edge.

Q: 9. How far should the ridged top lift in order to remove the blade? Mine is only about 45' open and the blade isn't accessible. I'm afraid that the blade has shifted and is causing it to not be accessible. I would love to see a video of this process. I love this cutter, but need to replace the blade!

A: I would recommend contacting Falcon; Falcon (Marshall)Distributed By - Omega BrandessTel: (410) 374-3250 Website http://www.omegabrandess.com/ Email customerservice@omegabrandess.com

Q: 10. What material is this tool made out of? Is it aluminum? The package weight is only 1 pound.

A: Falcon (Marshall) Personal-Size Paper Cutter is made out of an assorted composition of steel.