The CG-2000 from TASCAM is specifically designed for the needs of broadcasting and post production. An OCXO (oven-controlled crystal oscillator) is used for its high precision and because it's not affected by the temperature of the environment. With a clock frequency precision of 0.01 ppm the unit delivers high-precision synchronization with a frequency stability of +/-0.005 ppm or less per day.

The unit is equipped with an external input connector that supports a 10MHz signal that allows it to be connected to a rubidium clock or GPS clock for even higher precision. External clock jitter is reduced using an original circuit design that incorporates a high-performance video clock generator engineered with a FPGA and a PLL (phase-locked loop) circuit with a discrete filter. This enables a stable clock signal to be provided to the video/word outputs, improving system stability.

In addition to twelve Wordclock outputs and four video outputs, the digital outputs include two AES3/AES11 and two S/PDIF outputs, making this unit useful for large-scale audio/video synchronization systems and a wide variety of other applications. Of the twelve Wordclock outputs, two also support x2 Fs, x4 Fs and 256 Fs output, enabling them to be used in systems with Pro Tools and other DAW software.

The unit features multiple functions to support maintenance and the identification of issues if problems occur, allowing the device to provide troubleshooting support. Additionally, a logging function enables issues to be listed, and saved to a CSV file format on a USB flash drive. A self-correction function allows users to conduct maintenance using an external signal input and simple operations.

The GC-2000 provides redundancy for the power supply and the video/audio clock, as well as alarm outputs in the event an error occurs. Amphenol BNC connectors on the chassis use nuts for coupling for extra durability, along with a single circuit board used for each connector. This provides good resistance to the twisting and pulling of cables, and the suppression of interference between connectors.

For Broadcasting and Post Production    Highly Accurate OCXO Crystal    NTSC, PAL, HD Tri-Level I/O    12 Wordclock Outs    AES and S/PDIF I/O    Pull-Up/Down for Film, NTSC, PAL    Glitch-free Relocking Circuit    Video/WC Inputs/Power Supply Redundancy    Alarm Outs + Self Diagnosis of Problems    1U Rackmount

• Two power supply circuits for redundancy

• Supports video reference/word clock redundancy

• Internal clock uses a high-precision OCXO (oven-controlled crystal oscillator) that is not influenced by the temperature of the environment

• External input connector that supports 10 MHz, allowing creation of systems with even higher precision

• Glitch-free relocking circuit prevents noise and skipping during clock dropouts and recovery

• Numerous output connectors, including twelve Wordclock outputs, enabling the use in large-scale audio synchronization systems

• Supports input and output of a variety of video signal formats, including NTSC, PAL and HD Tri-level

• AES3 and AES11 signals can also be used for external master clock input sources

• Analyzer function that can measure output device termination

• Optimal levels can be provided to other devices by adjusting Wordclock output levels

• Self-calibration function using an external oscillator (Atomic/GPS 10MHz, GPS PPS) (requires a separate PPS-output 10 MHz oscillator with a built-in GPS antenna)

• Wordclock performance up to 192 kHz

• 0.1% pull-up/down for 24F (Film) and 29.97F (NTSC), and 4% pull-up/down for 24F (Film) and 25F (PAL)

• Up to four system settings can be saved to buttons for recall, and saved settings can be imported and exported via USB

• Durable Amphenol manufactured nut-coupling BNC connectors

• Independent circuit boards for each connector prevents contact failures due to twisting

• Panel-lock switch can be used to prevent inadvertent changes to unit operation

• 128 x 64-pixel organic EL display with a wide viewing angle

• Firmware updates possible using the USB port

• 1U rackmount

• RoHS-compliant

Related Questions and Answers

Q: 1. Can you convert a 1080p SDI source to 720P by only clicking the buttons or do you need to do anything else with the software? THanks.

A: The following unit does not support video scaling , it only supports different signals in different formats.

Q: 2. What frequency? Square or sine wave output?

A: The Antelope Isochrone Trinity Master Clock Generator (B&H # ANISOTR) features three (3) independent and simultaneous audio generators up to 384kHz and varispeed control +/- 200 cents. It is a 10 MHz atomic master clock. There are no documents that address sine/square wave specifications.

Q: 3. What is the right cable for RED?

A: The following B&H code will be the correct cable: RE7900643

Q: 4. Can the UHD 4K resolution be added to this converter?

A: According to BMD website, this works with UHD.

Q: 5. Do you have to select somewhere to change from Tri-level or black burst or does it do it automatically depending on what format you have selected?

A: You can manually select the video format and it will automatically output tri-level when choosing high definition formats and blackburst when choosing standard definition formats.

Q: 6. So can this generate a time (clock) sync to my 4 BM hyperdeck studio minis? so they all receive the same time whether they are all recording or not? So if one of the rec deck starts recording a later time it will match the other recorders that are currently recoding ? Assuming they are all connected to this device?

A: this is NOT a timecode in a (sync)generator. There is no external timecode input on the Hyperdeck Mini if you would like to embed time code it would have to be imbedded directly into the video using something like the Tentacle Sync Sync E Timecode Generator.

Q: 7. Is there detailed instructions on how to hook this up as I'm new to genlock and looking to setup a stereo rig with two micro cinema cameras?

A: Please see pages 76-78 of the Blackmagic Converters Manual for information. You can find all of the product manuals on the Support page of the Blackmagic Design website.

Q: 8. We lost the power supply to our sync gen, do you sell them? What type of plug does it take? Our 12v power supplies don't fit.

A: The replacement power supply for the Blackmagic Design Sync Generator is listed below. Blackmagic Design PSUPPLY-INT12V10W Power Supply for Mini Converters BH #BLPSMC

Q: 9. Will this give me clean switches on a Blackmagic 16x16 3G HD-SDI switcher?

A: Hi there... I am the user of this Sync Generator but i am not the expertise... As far as i use this, this BM Sync Generator can act same like other Masterclock / SPG... which is to synchronize / lock all the devices (such as camera basestation / vision mixer / universal converter) that need "Ref In" in your Multi-Camera Production system....

Q: 10. Is there a D-Tap power cable for this?

A: There are several D-Tap to 12V barrel cables on this site.