This is a storm Round Small Fleece Eyecushion from Blue Star. It fits all camera and viewfinder eyecups of matching dimensions, including Canon C100, Panavision Millennium, and RED BOMB EVF eyecups.

Fits Canon C100, Panavision Millennium, and RED BOMB EVF Eyecups; 2.8" Outside/1.26" Inside Diameter

Outside diameter: 2.8"
Inside diameter: 1.26"

• Canon C100 (original eyecup)
• Panavision Millennium
• RED BOMB EVF

Related Questions and Answers

Q: 1. Does anyone know how deep the base of the case is and the how thick is the egg crate cover is in inches?. The stats say 8.4 inches total. Would like a break down. Want to put a NIKON D610 with battery drive into the case horizontally (tripod socket parallel to the floor of the case). Thanks.

A: Question answered. I bought the unit. No issues.

Q: 2. Would this case work for a telescope where the optical tube's diameter is 9.1 and an length of 16.75 ?

A: The foam can be pulled apart to fit anything even your telescope.I am not sure how strong those are but I would save some foam and use it to cover up the unit.Basically give some space at the top of the telescope and drop foam on top for travel.

Q: 3. Will this unit accommodate a CANON G7X Mark II- this camera is a high end point and shoot. I would place it in the scenery position. In other words, horizontal in the case. Would it fit properly?

A: The Pelican iM2050 Storm Case with Padded Dividers (Black) will accommodate a CANON G7X Mark II in the horizontal position

Q: 4. Does it fit with xeen lens vertically way?

A: Yes this case can fit a single Rokinon Xeen series lens in a vertical position.

Q: 5. Hi, which Pelican case would you suggest for a Nikon 70-200mm FL ED? This case seems to long for that lens - is there a slightly smaller case anyone would recommend? Thank you people!

A: Close in size, but a little smaller would be the Pelican 1400.https://bhpho.to/2x3yBmX

Q: 6. What size allen wrench do you need to tighten the casters?

A: According to Kupo, the set screw on the Kupo 80mm Brake Caster 22mm Round (Set of 3) have a 3mm Allen socket.

Q: 7. does this storm coat fit a Sony PMW X400 camera?

A: The PMW X400 is not on the list of supported devices. Following is that list: Sony BVW-D200, BVW-D300, BVW-D400, BVW-D600 camcorder Sony DNW7, DNW709WS, DNW7P, DNW9, DNW90, DNW90P, DNW90WS, NW90WSP camcorders Sony DSR-130P, DSR-135P camcorders Sony DVW-700, DVW-707, DVW-709WS, DVW-790WS, DVW-970 camcorders Sony DXC-537, DXC-637, DXC-D30, DXC-D35H, DXC-D35L, DXC-D35WS, DXC-D50 camcorders Sony HDW-700, HDW-730, HDW-730S, HDW-750, HDW-900, HDW-F900 camcorders Sony MPEG-50 camcorder Sony MSW-900, MSW-900P, MSW-970 camcorders Sony PDW-510, PDW-510P, PDW-530 camcorders Sony UVW-100 camcorders

Q: 8. What is the minimum foam width I need to effectively protect my items? Is one inch of foam between a camera and the interior wall enough?

A: It is best to have at least 2 inches of foam between the interior wall and the camera for better protection.

Q: 9. Would this make a good case for c-stands?

A: Yes, as long as they are turtle stands with removable legs.

Q: 10. I expected more movable dividers, especially in the bottom yellow section/tray. Is it possible to purchase additional movable dividers for the Pelican iM2975 Trak Case?

A: I am sorry but there does not seem to be any separate partitions sold separate. You might need to contact the manufacture for those parts, https://bit.ly/2RcZ6BG