Store, transport, and protect your 16.1" laptop from moisture and dust with the gun metal gray 710CC Computer Case with Metal Keyed Locks from Seahorse. The case features keyed metal locks, foam, a built-in purge valve, a latch closure, padlock hasps, a shoulder strap, and a large handle.

Watertight, Dustproof Case    Holds a 16.1" Laptop    Metal Keyed Locks    Inner Foam    Latch Closure    Built-In Purge Valve    Padlock Hasps

Related Questions and Answers

Q: 1. Does this use a standard thread like an AKG P420?

A: The thread this connects to the mic stand is a standrd 5/8" and will fit on any microphone stand. It is designd to fit Thronmax microphones. Other manufacturers microphones may not fit.

Q: 2. I own 2 of these. One of them the tension on the chain to unroll is very tight--I have to pull hard to bring the paper down. On my other one, the tension is so loose it doesn't want to stop unrolling. This makes me believe that there is a way to adjust the tension but I can't figure it out. To be clear, the entire roll and chain/gear/pulley keep unrolling, it's not just the paper tube not being tightly attached to the rods. How do you adjust?

A: On the drive end with the Impact logo, there is a knob behind that which will allow you to control the tension of the drive.

Q: 3. Do these work with vinyl backdrops? I have the wall mounted hooks and 96" rolls of vinyl but have not been able to unroll them more than halfway before the entire roll's weight unravels the entire roll almost ripping it off its core. The chain links have snapped multiple times as well and just don't seem sturdy enough to work unless I have something set up incorrectly.

A: For vinyl I would use the metal change. And I would not go larger than the width you are using now because the foll becomes too heavy for the drives. You must use both sides of the chain to have a controlled lowering of vinyl because it is heavier. Holding both sides of the loop of chain should keep it from spinning uncontrollably off the cardboard roll. We do not sell the Impact chain on it's own but the Manfrotto 091MCG Metal Chain for Expan Drive, Gray 11.5' (3.5 m) BH #MA091MCG will work on your Impact drives and should not break,

Q: 4. Does it come with paper weights?

A: No the Impact Wall Mounting Kit with Metal Chain for Roll Paper does not come with paper weights.

Q: 5. how many backdrop can i use this? and how many Varidrives are in the box?

A: The Impact Wall Mounting Kit with Metal Chain for Roll Paper holds three back drops. This kit contains the following: 3 x Impact Varidrive Set with Metal Chain (Silver), 2 x Varidrive Insert, 13' Metal Chain (Silver), Chain Weight Impact Background Triple Hooks (Set of 2), 8 x Concrete Anchor Bolts, and a Limited 1-Year Manufacturer Warranty.

Q: 6. If I want to connect the wall mounting kit to varipoles and clamps what extra hardware do I need to get or is it included?

A: This should work but has not been tested on the Impact Wall Mounting Kit with Metal Chain for Roll Paper, https://bhpho.to/3VAO7ky and two of, https://bhpho.to/3UBq97s .

Q: 7. Can this hold a large umbrella, e.g. 60 or even bigger?

A: It has a substantial toothed locking system that should handle that fine.

Q: 8. What wall mount is compatible to this product??

A: Impact makes a triple hooks. https://bhpho.to/2nF8rXb

Q: 9. will this work with a 40mm voightlander f1.2 lens?

A: Yes, if the lens you have has 52mm filter threads.

Q: 10. is it compatible with (Manfrotto Manfrotto Background Baby Hooks) ??

A: Yes, the Manfrotto Background Baby Hooks work with Expan Drives and the Impact Varidrives.For safety I highly recommend using a heavy sand bag on each stand leg. When you unroll the paper background it pulls forward at the same time and you need the weight to help prevent it from falling over.