Featuring a 323 PPI (pixels-per-inch) IPS LCD panel, the FeelWorld 7" 4K Ultra-Bright Monitor with Loop-Through HDMI and 3G-SDI is up to the task of displaying SD, HD, UHD, and DCI 4K video. The LCD panel boast a 1920 x 1200 resolution, 16:10 aspect ratio, 1200:1 contrast ratio, and a 2200 cd/m² measured brightness for easy viewing outdoors as well as in. The IPS LCD provides good off-axis viewing, allowing you to see the image without being directly in front of the monitor and not experiencing distorted colors or contrast. The monitor's chassis is both thin and light at an inch thick and weighing only 13.9 oz with the removable L-series battery plate.

On the side edge of the monitor you'll find the loop-through HDMI and 3G-SDI input and output connections, while the headphones and external DC power input reside on the opposite edge. Along the bottom edge is the 1/4"-20 threaded mounting hole, and the control buttons reside along the top edge of the monitor. The back of the monitor hosts the included L-series battery plate, as well as the VESA 75 compatible mounting screws. A variety of image evaluating tools are built into the monitor including a histogram, false color, and zebras for checking exposure, peaking and magnification for checking focus, and markers for ensuring correct framing.

7" 1920 x 1200 IPS LCD Monitor    HDMI 1.4 and 3G-SDI Loop-Through I/O    Accepts SD, HD, and UHD 4K Video    2200 cd/m² Brightness    1200:1 Contrast Ratio    160° Viewing Angle    Edge-Mounted Control Buttons    Includes Removable L-Series Plate    Image Evaluation Tools    1:1 Pixel Mapping

• High-resolution 1920 x 1200
• High-contrast of 1200:1
• Ultra-bright 2200 cd/m²
• 160° wide-view-angle IPS Panel
• Ultrathin design
• Histogram
• Peaking focus assist (red, green, or blue highlight over parts of the image in focus)
• False color
• Zebra exposure
• Nine-grid
• Embedded audio
• Scan mode (underscan, overscan)
• Zoom (4x, 9x, 16x)
• Anamorphic mode (1.3x, 2.0x, 2.0x mag)
• Pixel-to-pixel
• Center marker
• Safe area (80%, 85%, 90%, 93%, 96%, 2.35:1)
• Ratio marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1)
• Marker color (red, green, blue, white, black)
• Check field (red, green, blue, mono)
• Image flip (H, V, H/V)
• Image freeze
• Zoom all
• U/D and L/R zoom
• Color temperature adjustment

FEELWORLD uses the professional Rec. 709 HD color standard and is calibrated at the factory. It can achieve monitor calibration efficiently and get accurate color reproductions easily, showing the image when you shoot without distorting the color.

The menu controls are intuitive and easy to use. On the top of the monitor is a full button layout. Two different feature buttons are programmable to the various features that you use the most.

The compact design includes 4K HDMI in/out so you can connect them to 4K cameras and DSLRs. The HDMI connection is compatible up to 4K30p.

The FW279 has 4K HDMI in and loop-through out, allowing it to not only display live signals but also send them out to other monitors simultaneously.

Histogram is a quantitative tool to check the picture brightness.

The audio level meters provide numerical indicators and headroom levels.

The peaking filter displays a colored highlight on the screen where sharp edges appear.

Built-in selection of no-squeeze, 1.3x, or 2.0x allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not desqueeze in-camera.

The monitor will automatically save the parameters previously set, and keep the original settings when you turn it on next time.

Related Questions and Answers

Q: 1. Is there a mounting screw hole on the top of the monitor?

A: It does not. This only has the single 1/4"-20 thread under it.

Q: 2. What is the latency on this monitor?

A: We are not aware of any specific latency specs for this monitor, but there should be little to no latency for the HDMI input when it is being used.

Q: 3. how do you get to false color?

A: False colors can be found in the menus for this monitor.

Q: 4. Can you get a battery plate for LP-E6 batteries??

A: Unfortunately B&H does not sell an LP-E6 battery plate which we know is compatible with this monitor. Instead we recommend an inexpensive kit with Sony L style batteries. https://bhpho.to/2kVwH5M

Q: 5. I'd like to power this monitor with an Anton Bauer battery. Can you recommend a ptap to dc cable?

A: This FotodioX device should be a very good match: https://bhpho.to/35MPu7i

Q: 6. Most high brightness monitors draw a lot of power. Any idea how long a NP-F770 would last compared to the 5" version of this monitor?

A: A battery like the Watson NP-F770 is rated for around 32.5 Watt Hours. This monitor has an 18 Watt Draw. You should expect to get a bit less than 2 hours of operation with an NP-F770. https://bhpho.to/2n2NUHc

Q: 7. Is it the best FeelWorld 7” monitor or you can recommend other one (only hdmi ver.) ?

A: This is a great option from FeelWorld for a 7" Monitor. It can accept a UHD 4K signal at up to 30fps and it is rated at 2200 Nits. It is a high bright monitor as well.

Q: 8. Can you use this with a DJI Smart Controller? It has an HDMI output.

A: Yes, with the HDMI out on the DJI Smart Controller you can connect this monitor to the Smart Controller.

Q: 9. Does this support 10bit depth?

A: This does not have a 10-Bit panel. This is an 8-Bit Panel only.

Q: 10. does this have auto flip for upside down operation?

A: Yes, the Feelworld 7" 4K Ultra-bright monitor does have a Horizontal and Vertical Image Flip feature.