The Oval Small Viewfinder Eyecushion in yellow Ultrasuede, from Bluestar, features outside dimensions of 3.8 x 3" to securely fit over many common external and built-in viewfinders. These include the GGS Perfect LCD Viewfinder, JJC ES-A6500G, LCDVF, and Letus Hawk, as well as those of the Sony Betacam, FS7, PXW-X320L, PXW-X320, PMW-400, and PMW-500 cameras. This Ultrasuede version is made of 100% non-woven material consisting of intertwined, brushed, ultra-fine fiber strands. It provides a high level of softness and a superior moisture absorption rate, and it can be used in any climate.

3.8 x 3" Outside Dimensions    1.8" / 46 mm Inside Diameter

Related Questions and Answers

Q: 1. This was designed for the Ikon cameras; does it give you accurate framing for Leica M cameras?

A: The ZEISS Viewfinders are designed for use in cameras where the hot shoe is positioned directly over the center of the lens (as was the case with the discontinued ZEISS Ikon rangefinder camera). The hot shoe on the camera in question is positioned off-center. So while the AOV of the viewfinder will match the lens, the framing will not be accurate due to the differences in the hot shoe placement. If you can accept this, then the viewfinder will work on the camera.

Q: 2. Will this work with the SD Quattro and DP Quattro series?

A: No. The following unit is designed and made for the fp and fp L cameras.

Q: 3. Does this viewfinder accept ZEISS ZI Diopter Correction Lenses ??

A: The ZEISS ZI Viewfinder for 21mm Lens does work with the ZEISS ZI Diopter Correction Lenses.

Q: 4. Is it made of magnesium

A: No, the Sigma LVF-11 LCD Viewfinder is not made of magnesium. Here is a breakdown on what it is made out of: Bracket: Aluminum alloy Body: Polycarbonate Lens Barrel: Aluminum alloy Rubber: NBR/PVC

Q: 5. Does the Sigma EVF-11 Electronic Viewfinder have a passthrough HDMI, so I can plug an HDMI cable into the viewfinder and go to an external monitor / recorder? If so is it HDMI2 and what size?

A: Unfortunately, no, the Sigma EVF-11 Electronic Viewfinder does not have a pass-through HDMI port on the viewfinder to allow the use of an external recorder simultaneously with the EVF-11. If you need to use an external recorder or external monitor, then the EVF-11 Electronic Viewfinder would not be used on the camera.

Q: 6. Are there any other photos? Is there ¼-20, as well, as Arri rosette? Anti-fog lens?

A: This CVP artical has other pictures of the Z CAM 2.89" EVF101 Electronic Viewfinder. https://cvp.com/product/z-cam-ev101-electronic-viewfinder

Q: 7. Can anyone confirm if this EVF will attach to the Zacuto Axis Mini EVF rosette? I believe the connection is 1/4"x20, but I'm not sure if the rosette is standard between them.

A: The Z Cam EVF has a metric rosette with 1/4″-20 screw thread.

Q: 8. Hi, I'm wondering if I can use this on the ZCam E2-F6 whilst simultaneously using a Blackmagic VideoAssist 5"12G to record in Blackmagic Raw format?

A: Yes it would work, The Black Magic Video Assist has a HDMI loop output that you could connect the Z CAM 2.89" EVF101 Electronic Viewfinder to.

Q: 9. This EVF is compatible with Sigma FP (Original) or only with FP L?

A: From looking at the image and having the Sigma FP in hand, it does look like the pin configuration and ports will match up, but we do not have one in stock yet to test unfortunately.

Q: 10. When used with a C70 how is it powered? Can it be directly powered by a C70 output rather than having to get the larger battery with power taps?

A: The Z CAM 2.89" EVF101 Electronic Viewfinder is powered through a 2-pin LEMO input. There is the Core SWX NANO-C98 14.8V Battery with D-Tap for Select Canon Camcorders. This battery has a D-tap OUT that can power the EVF. https://www.bhphotovideo.com/c/product/1506755-REG/core_swx_nano_c98_14_8v_battery_with.html?sts=pi&pim=Y