Ideal for a multitude of outdoor ENG, broadcast, and film applications, this large Cyclone Windshield Kit from Rycote features a two-piece "Z-Locking" basket design that magnetically affixes around your microphone, isolating the mic from wind-caused noise. Up to 50 dB of reduction can be achieved with the use of the Cyclone Windshield alone, and >60 dB is possible when used with a Windjammer on top of it. Increased transparency is achieved due to the cone-like shape, which reduces reflections from parallel surfaces in the recording environment, providing clean audio recordings during outdoor interviews, location shoots, and more. It's designed to provide wind noise reduction that exceeds traditional modular-style windshield/windjammer combined performance.

The Cyclone introduces a "multi-suspension" design that provides isolation against handling noise, cable-borne noises, and windshield basket self-noise. This multi-suspension design inhibits noise and vibration induced by the windshield itself from being mechanically transmitted, thereby improving recording quality.

The kit includes the Cyclone Suspension fitted with 72-shore Universal Lyres, a Cyclone XLR cable, a pair of Universal Lyres 62-shore for lightweight microphones, and a hex key driver for making adjustments to the Lyres on the suspension.

Complete Windshield & Suspension System    >60 dB of Wind Reduction with Windjammer    Isolation from Handling Noise    Magnetized Two-Piece Basket Design    Durable 3D-Tex Material    Includes XLR Cable

• AKG: C568EB
• Audio-Technica: AT 4073, BP4073, AT897, AT877
• Neumann: KMR 81i
• Røde NTG-2, NTG-3, NTG-4+
• Sanken: CS-2, CS-3e
• Schoeps: CMIT 5U, Super CMIT, SuperCMIT 2U
• Sennheiser: MKH 416, MKH 60, MKE 600
• Shure: VP89S
• Sony: ECM 670, ECM 678

Related Questions and Answers

Q: 1. which windjammer works with the Rycote Stereo Cyclone MS Kit 11 Windshield System for Sennheiser MKH 416 and MKH 30?

A: The Rycote Cyclone Windjammer for the Cyclone Windshield - Medium (B&H # RYCWJM) can be used with the Rycote 089120 Stereo Cyclone MS Kit 11 Windshield System.

Q: 2. Will this work with a pair of Nuemann 184's?

A: The Rycote Stereo Cyclone XY Kit 1 Windshield System for Sennheiser MKH 8040 X/Y Pair is designed specifically to fit a pair of Sennheiser MKH 8040 microphones. The Neumann KM 184 is a different size and as such will not fit properly.

Q: 3. Does the cyclone work with any boom pole?

A: I have a boom pole that is 3/8 so i will need to purchase another one with a 5/8

Q: 4. Can the medium size allow the spacing between the 2 shockmounts clost enough to accommodate the Sennheiser 8050 (with additional length of XLR cable at back)?

A: The length of the MKH-8050 mic is 2.9". The length of the microphone in the pictures of the Rycote Cyclone is 9.88". Based on this, I surmise that you will have little to no trouble trying to do this.

Q: 5. am i going to need a specific XLR cord for the end ?

A: Yes, the Rycote Stereo Cyclone DMS Kit 1 Windshield System for Schoeps CCM 4 Pair & CCM 8 uses a 7-pin XLR, not a typical 3-pin XLR

Q: 6. How should this windshield be stored and transported - what type of case?

A: There is no specific case designed for storing and transporting the windshield, but you could use a hardshell case like those made by Pelican and SKB or use a padded carry bag.

Q: 7. will this fit a deity smic-2s?

A: Yes, that windshield would fit the Smic-2s. If you prefer the blimp # RY086072 would also be a good option.

Q: 8. Hello, 1. does it fit with Sennheiser Ambeo Vr? BH #SEAVRM MFR #507195 2. where can I buy a windjammer for this? Thank you.

A: 1. Yes the Rycote Stereo Cyclone Ambisonic 1 is directly compatible with the Sennheiser Ambeo VR 3D Microphone. 2. I am not finding that Rycote offers a compatible windjammer for this.

Q: 9. Would this MS Kit 11 work for an Sennheiser 8060 and MKH 30?

A: The Rycote Stereo Cyclone MS Kit 11 Windshield System for Sennheiser MKH 416 and MKH 30 is considered a Made For Specific Microphone Series. The Sennheiser MKH 8060 is a Short Shotgun Microphone that would require a lyre suitable for shorter shotgun microphones.

Q: 10. What cable adapter do I need to connect to my Sound Devices Mixpre 6?

A: An XLR connector.