This pair of Aluminum 15mm Rod with M12 End Threads from CAMVATE lets you attach 15mm rod-mounted accessories to your rig. These lightweight aluminum rods measure 5.9" in length and, with the appropriate baseplate or top plate, will conform to the 15mm LWS rod standard for accessory mounting. The aluminum construction keeps these rods lightweight while allowing them to maintain the rigidity necessary for accessory support. M12 threads on each end allow you to extend the rods using separately available M12 threaded connectors.

Pair of Standard 15mm Rods    Each Rod Measures 5.9" in Length    M12 Thread on Each End for Extensions    Lightweight Aluminum Construction

Related Questions and Answers

Q: 1. Does the Matthews Rags come with a bag?

A: Unfortunately, this product does not include a bag.

Q: 2. What type of connector is at the end of the cable? Can it power other cameras?

A: It is a 2-pin Weipu connector found on Blackmagic Pocket Cinema Cameras. The IndiPRO Tools Dual NP-F Power System with 15mm Rod Mount is only compatible with the Blackmagic Design Pocket Cinema Camera 4K/6K.

Q: 3. Is this product made of metal?

A: The rail mounting clamp and bolt are metal. The battery and microphone input block is plastic (except for electrical connections and a few small pieces on the xlr inputs. The plastic has so far held up fine -- without receiving 'kid glove' treatment. Biggest issue is that there is nothing that locks batteries in place, and the shape makes rigging a solution a bit of a chore. As a cord-cutter, we've ran a BMPCC for a good eight hour day with almost no off-time, and plenty of checking takes - and could have gone hours more. Keep an eye on camera temp during extended 'camera on' shoots - especially if shooting time lapse in RAW format - parts of the camera can get too hot to touch and suffer damage. This not an 'approved' Blackmagic device, so may lack some form of power management on a camera that has no self-cooling system. Note the xlr inputs are just converters (not a preamp and offer no phantom power). Otherwise, a good, budget solution with a touch of DIY to keep batteries on the unit. For pro use, there are better and, naturally, more expensive choices. That said, ours is still in the field...

Q: 4. The L-angle plug does not fit through my cage that encloses my blackmagic pocket camera. Where can I get a straight plug adapter or extension so I can plug the L-angle plug of this IndiPRO Grid to the power port on the camera?

A: Unfortunately there is not a solution for adapting this right angle connector to a straight connector.

Q: 5. Is this compatible with other cameras? Specifically Sony a7siii

A: No, the following unit is made and designed for blackmagic pocket cinema camera.

Q: 6. does it include the batteries?

A: No this unit does not include batteries. All batteries are sold separately.

Q: 7. Fire retardant or not?

A: The Matthews Unbleached Muslin Overhead Fabric (5.9 x 5.9') BH #MAF66MU is not fire retardant.

Q: 8. Will the Vivitar 2.2x Telephoto Conversion Lens Attachment for 58mm Threads work reasonably well on a Panasonic FZ35? I am seeing reviews of converter lenses that suggest that they will not work well with long telephoto lenses.

A: To use an-add-on lens on the Panasonic FZ35 you need an adapter, DMW-LA3 Lens Adapter. But it has been discontinued. If you have that part the correct telephoto conversion lens is the DMW-LT55, 55mm.

Q: 9. Where does it mount to the Pocket Camera?

A: It's designed to mount on rails, not the camera itself, but the rail mount can be unscrewed leaving a 1/4-20 hole if you want to mount it another way.

Q: 10. Can this be used to power the BMPCC 4K as well? Im thinking that "6k or 6k" is a typo but im not sure of it.

A: Yes, this will work on both the 4K and 6K.