The SKB iSeries Case for Blackmagic Design Atem Television Studio features ultrahigh-strength polypropylene copolymer resin construction, with custom-cut PE foam. It is dust- and water-tight, and can be completely submerged in water. It is resistant to impact damage and features a molded hinge, folding overmolded cushion grip handles, and an automatic pressure equalization valve. The case is resistant to degradation caused by UV, solvents, corrosion, and fungus.

• Custom-cut PE foam to fit Blackmagic Design ATEM Television Studio
• Ultrahigh-strength polypropylene copolymer resin
• UV, solvent, corrosion, and fungus resistant (MIL-STD-810F)
• Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
• Automatic ambient pressure equalization value (MIL-STD-648C & IP67)
• Molded-in hinges
• Rubber overmolded cushion grip handle
• Locking loops for a customer-supplied lock
• Trigger-release latch system

Related Questions and Answers

Q: 1. Can the 4k8 send live video feeds to 10 separate display monitors?

A: The Blackmagic Design ATEM Television Studio 4K8 has 10 Aux outputs that can be set to any source or program feed independently.

Q: 2. Can the 8 SDI outputs be assigned to AUX 1 or AUX 2 so switching on the panel will change all outputs under each AUX line?

A: Unfortunately, the Aux outputs of the Blackmagic Design ATEM Television Studio 4K8 cannot be grouped, meaning they are independent outputs. It would be possible to incorporate a Black Magic 12g Video Hub to handle the distribution, though.

Q: 3. Are the 8 SDI Outputs all programmable? such as can I select what source each SDI out is sending similar to an AUX?

A: The Blackmagic Design ATEM Television Studio 4K8 has 12 total SDI outputs. 10 outputs are AUX outputs, which the output can be selected in the Blackmagic ATEM software. The switcher also has an SDI Program output and an SDI Multiview output as well.

Q: 4. Does this model have the internal drive for recording like the ISO model does? If not, can it be added?

A: The Blackmagic Design ATEM Television Studio 4K8 offers an M.2 SSD slot but does not include an M.2 SSD drive. This switcher does not offer ISO recording like the Blackmagic Design ATEM Television Studio HD8 ISO but can record the program feed.

Q: 5. DOESN'T THE NEW 4K8 COME WITH TEN (10) 12G AUX OUTPUTS? (not 2?) 10 FULLY CUSTOMIZABLE AUX OUTPUTS VIA SDI? thanks!

A: Yes, the Blackmagic Design ATEM Television Studio 4K8 offers 10 12G-SDI aux outputs.

Q: 6. This equipment allows you to record multicam, that is, if you have 6 cameras connected to it?

A: The Blackmagic Design ATEM Television Studio 4K8 does not offer ISO recording for each camera input. This model will only record the Program output of the switcher to USB-C SSDs. Please note that the recordings are HD, and not 4k when recording to disk. The model listed below is the ISO model and can record the Program output, and 1-8 connected cameras. Blackmagic Design ATEM Television Studio HD8 ISO BH #BLATEMTSHD8I

Q: 7. What is the latency of a 12g video from input to program output on this mixer?

A: Blackmagic does not list the latency for the Blackmagic Design ATEM Television Studio 4K8 because it is less than 3 frames. The same can be said for their Micro Converters.

Q: 8. Listed in the key features is "Studio Camera Control". Can you give me more details on this? Is the joystick only for PTZ?

A: The Blackmagic Design ATEM Television Studio 4K8 joystick can be used for controlling VISCA control cameras, like PTZ cameras. The Joystick is also used for sizing and positioning Keys, and DVEs effects.

Q: 9. Specs description mentions 4M/E is that right??

A: The Blackmagic Design ATEM Television Studio 4K8 is a 1 M/E switcher.

Q: 10. Is it compatible with the sony ptz for remote controls? Thanks,

A: The Blackmagic Design ATEM Television Studio 4K8 can remotely control up to 7 daisy chained PTZ cameras that are capable of receiving RS-422 VISCA control prompts.