Monitor your videos and compose your shots with the GyroVu Lightweight 4K 5" On-Camera HDMI Monitor, which includes a carbon fiber clamp mount that fits rods up to 30" in diameter for DJI Ronin Series gimbal stabilizers. Using an 8-bit 1920 x 1080 IPS LCD panel with a 1000:1 contrast ratio, 400 cd/m² brightness, and a 170° viewing angle, focusing by eye is possible, and critical focus can be achieved using the pixel zoom function. Since this monitor is lightweight, using it atop a small mirrorless camera won't add bulk to a compact setup.

The HDMI input accepts DCI and UHD 4K resolutions, allowing the camera provide a sharp image to use for framing. The monitor's dual-purpose battery plate will accept either L-series batteries or LP-E6 batteries. A carbon fiber clamp mount that fits rods up to 30" in diameter is included, designed to attach to the handle of a DJI Ronin Series stabilizer. Also included are a sun hood for blocking reflections and glare, a shoe mount with a ball head for placing the monitor atop your camera, a D-Tap to 25mm barrel power cable, two Allen wrenches to tighten the mount screws, and a mini-HDMI to HDMI cable.

Lightweight 5" On-Camera Monitor    DCI 4K Support, 1920 x 1080 Resolution    HDMI Input and HDMI Loop Out    Dual LP-E6 or L-Series Battery Mount    Wide 8-Bit Color Gamut    1000:1 Contrast Ratio, 400 cd/m²    170° Viewing Angle    Includes Carbon Fiber Clamp Mount    HDMI Cable, Sun Hood, Shoe Mount

Lightweight 5" on-camera monitor with 1920 x 1080 resolution; accepts up to DCI and UHD 4K HDMI input and active loop out.

Dual battery plate accepts two Sony L-series or two Canon LP-E6 batteries.

Wide color gamut, 400 cd/m², 1000:1 contrast ratio, 170° viewing angle.

Features include histogram, 2-channel audio monitoring, zebra, safety zones, pixel zoom, and more.

Audio features include a built-in stereo speaker and a headphone jack.

Includes a monitor hood, HDMI cable, a shoe mount adapter, and a carbon fiber clamp mount that fits rods up to 30" in diameter designed to mount your monitor on a DJI Ronin Series handle. Allen wrenches and screws are included to attach the mount.

Related Questions and Answers

Q: 1. Just to be sure, will this work with the 7/8 post on a Glide Gear DNA 6000 arm and vest?

A: GryroVu lists this on their website as working with 7/8 posts. See here for further information. http://bit.ly/2qsX7e8

Q: 2. hi, if the essential kit doesn't come with the power adapter or charger, how do i charge the battery?

A: This kit comes with USB Cable which you will use to charge the batteries.

Q: 3. Can this be used successfully in a helicopter with doors off?

A: Why not? Just secure it like any other device.

Q: 4. Will it work with the thumb controller?

A: Currently no DJI thumb controller, wireless or otherwise, is compatible with the Ronin-S. The Ronin-S comes with a canbus-sbus cable that will allow you to use third party controllers and reeivers that use sbus.

Q: 5. Essentials Kit?

A: Yes, this is the Essentials Kit with a Nanuk Hard Case. The Essentials kit includes the following list included: Ronin-S BG37 Grip with Built-In Battery Camera Mounting Plate 3 x 1/4"-20 Camera Screw USB Type-C Cable Lens Support Camera Riser Extended Grip/Tripod (Plastic) Touch Fastener Strap for Gimbal Storage Case Limited 1-Year Warranty on Gimbal Limited 6-Month Warranty on Motors

Q: 6. it has a focus peaking to work with sony a7s ii ?

A: This monitor does not list focus peaking. It does have pixel zoom function.

Q: 7. Does that kit contais the battery? I bought and i didn't get it.

A: Unfortunately no. B&H # (this item) GYGVM5004HRS does not come with a battery. What this unit does come with is a Dual LP-E6 or L-Series Battery Mount. You can get these batteries from the links below. https://www.bhphotovideo.com/c/product/352125-REG/Sony_NPF970.html + https://www.bhphotovideo.com/c/product/836000-REG/watson_b_4206_np_f975_battery_pack_f_sony.html

Q: 8. Work with Ronin-MX ?

A: It works, but the screws are just a little too short(could only get 2 screws in). I had to file off some of the plastic to get all 4 screws to go in far enough to thread in. I use it on the Ronin-M with a 7inch monitor and have no issues.

Q: 9. Is the Ronin-S compatible with the Nikon FTZ adapter?

A: We're not clear on the wording of this question, as the adapter on the camera should not affect the performance of the Ronin S.

Q: 10. What type of tripod would be best to use this? The one I have doesn’t have a head that will work.

A: A tripod without a head would need to have a 3/8 16 male screw to attach to the Axler 30" Lightweight Carbon Fiber Camera Slider. The Benro parts below would work as will the same model with a head. Benro 75mm Half Ball Adapter BH #BEBL75S Benro A373T Aluminum Video Tripod (75mm Bowl) BH #BEA373T or Benro A373F Aluminum Single-Tube Tripod with S8Pro Fluid Video Head BH #BEA373FBS8P