Monitor your videos and compose your shots with the GyroVu Lightweight 4K 5" On-Camera HDMI Monitor, which includes a 360° swivel mount for DJI Ronin-S gimbal stabilizers. Using an 8-bit 1920 x 1080 IPS LCD panel with a 1000:1 contrast ratio, 400 cd/m² brightness, and a 170° viewing angle, focusing by eye is possible, and critical focus can be achieved using the pixel zoom function. Since this monitor is lightweight, using it atop a small mirrorless camera won't add bulk to a compact setup.

The HDMI input accepts DCI and UHD 4K resolutions, allowing the camera provide a sharp image to use for framing. The monitor's dual-purpose battery plate will accept either L-series batteries or LP-E6 batteries. A 360° swivel mount is included, designed to attach to the handle of a DJI Ronin-S stabilizer. Also included are a sun hood for blocking reflections and glare, a shoe mount with a ball head for placing the monitor atop your camera, two Allen wrenches to tighten the mount screws, and a mini-HDMI to HDMI cable.

Lightweight 5" On-Camera Monitor    DCI 4K Support, 1920 x 1080 Resolution    HDMI Input and HDMI Loop Out    Dual LP-E6 or L-Series Battery Mount    Wide 8-Bit Color Gamut    1000:1 Contrast Ratio, 400 cd/m²    170° Viewing Angle    Includes 360° Swivel Mount    HDMI Cable, Sun Hood, Shoe Mount

Lightweight 5" on-camera monitor with 1920 x 1080 resolution; accepts up to DCI and UHD 4K HDMI input and active loop out.

Dual battery plate accepts two Sony L-series or two Canon LP-E6 batteries.

Wide color gamut, 400 cd/m², 1000:1 contrast ratio, 170° viewing angle.

Features include histogram, 2-channel audio monitoring, zebra, safety zones, pixel zoom, and more.

Audio features include a built-in stereo speaker and a headphone jack.

Includes a monitor hood, HDMI cable, a shoe mount adapter, and a 360° swivel mount designed to mount your monitor on a DJI Ronin-S handle. Allen wrenches and screws are included to attach the mount.

Related Questions and Answers

Q: 1. Hello, it is fully compatible with nikon D750?

A: You will be able to balance and shoot with the Nikon D750 on the Ronin-S. DJI has not yet developed a cable for control over that camera, however you still will be able to use it.

Q: 2. Just to be sure, will this work with the 7/8 post on a Glide Gear DNA 6000 arm and vest?

A: GryroVu lists this on their website as working with 7/8 posts. See here for further information. http://bit.ly/2qsX7e8

Q: 3. Will this work with the DJI Ronin-M?

A: The GyroVu uses 25mm bars and so does the DJI Ronin-M so we do not see why this would not work. Just know this has not be tested.Here are two other GyroVu mounts you might consider.

Q: 4. Work with Ronin-MX ?

A: It works, but the screws are just a little too short(could only get 2 screws in). I had to file off some of the plastic to get all 4 screws to go in far enough to thread in. I use it on the Ronin-M with a 7inch monitor and have no issues.

Q: 5. Is camera control available for the Nikon D780?

A: We're afraid not. The D780 is not on DJI's list of compatible cameras for control.

Q: 6. Can this be powered by d tap - and if so, how?

A: Yes, a D-tap cable could provide power from a power source to this monitor. You will need to use connect a D-tap to Sony L series cable, or a D-tap to LP-E6 cable. There is also a barrel input that could connect a D-tap source to this port.

Q: 7. Will pull-focus be available for sony a7 in the future?

A: We are not aware of any plans for the follow focus feature to work with Sony A7 in the future. However DJI will be releasing a focus motor for the Ronin-S, once that is release you will be able to pull focus with lenses on a Sony A7 camera.

Q: 8. There are a few options for robin-s. What would be the minimal kit required to work with 5D Mark II with Zeiss Makro-Planar 50mm?

A: For use with the Ronin S and a 5D Mark II with Manual Zeiss lens, we would recommend the DJI Ronin-S/SC Focus (SKU: WheelDJCPRN000801) and the DJI Ronin-S Focus Motor (SKU: DJFOCUSP17). bhphotovideo.com/c/product/1444752-REG/dji_cp_rn_00000008_01_ronin_s_focus_wheel.html https://www.bhphotovideo.com/c/product/1447211-REG/dji_cp_rn_00000022_01_ronin_s_part_17_focus.html

Q: 9. is it ok to leave a camera attached when not in use or is it bad for the motors/frame?

A: I dont have concrete evidence to a yes or no answer, but when I am using it and set it down or take a break, I leave the camera on with the motors off, but if the gimbal is no longer in use for a longer period of time, id then obviously take te camera off.

Q: 10. it has a focus peaking to work with sony a7s ii ?

A: This monitor does not list focus peaking. It does have pixel zoom function.